Shenzhen Kunhong Intelligent Electronics BSHSW80 Smart Bracelet User Manual

Kunhong Intelligent Electronics
Smart Bracelet User Manual
Model: 13S11-SW80-00113

Manufacturer: Shenzhen Kunhong Intelligent Electronics Co., Ltd

Wear Correctly

The bracelet is best worn on the wrist. Adjust wrist strap according to the size of your wrist; Buckle up the wrist strap. Sensors should be tightly attached to your skin.

Charge the Bracelet

Please ensure that the bracelet has enough power. If you can’t turn on the Bracelet due to low power, please charge your Bracelet and it will automatically turn on.

Install the App on your phone

Scan the QR Code or enter Apple Store or Google Play to download the App.

https://fitpro.jusonsmart.com/public/fitpro_download.html

Android/iOS: System: Android 5.0 and above, iOS 9.0 and above.

Connection

You need to connect phone with your bracelet for calibration for the first time. The Bracelet will automatically synchronize the time after connection.

• The App will automatically save the Bracelet after pairing. When the App is running or in the background, it will automatically search and connect your Bracelet.
• Please ensure that all permission such as running the App in the background and contact information are granted during installation.

Function

• When the Bracelet turns off, touch and hold the button for more than 3s to turn on the bracelet.
• In the address page, long press the button for about 2s to turn off the Bracelet. Short press to exit the page.
• The reset function can eliminate all data.
• When the device is on, short press the button to switch pages. The screen will turn off if there is no other operation.

Time
The Bracelet will automatically calibrate the time after connect your phone.
Step
Record your steps and you can see your real-time step through the Bracelet.
Distance
Calculate movement distance based on the steps. Calories Calculate calories burning based on the steps.
Heart Rate Test
You can see your heart rate after the test.

Multiple Sport Modes

Running
It can record your time of running and calories you have burnt.
Skipping
It can record your time of skipping and calories you have burnt.
Sit up
It can record your time of sit up and calories you have burnt. Sleep Mode The bracelet will automatically activate sleeping mode when you fall asleep. It can detect the times of your deep sleep, light sleep and wakefulness.
Note: The function can only be activate during 10 pm to 8am. And the detection can be synchronized to the App while sleeping for 3/4 hours.
Message
When there are several messages, you can see the latest 3 messages in this page.

Application Notification

Call Reminder:
If the call reminder function is on when the Bracelet connects with your phone, the Bracelet will vibrate and show the name and telephone number. (App needs to be granted permission)
SMS Reminder:
If the SMS reminder function is on when the Bracelet connects with your phone, the Bracelet will vibrate. (App needs to be granted permission)
Other Function:
When the vibration setting is on, the Bracelet will vibrate when there is a phone call and message. (App needs to be granted permission)
Permission:
If you need the reminder function, it needs to be set to allow “Fitpro” to run. It is recommended you to set “Fitpro” as trust App and grant all the permission.
Alarm:
You can set 8 alarm clock by “Fitpro” which will synchronize to your bracelet. It also support offline alarm clock. After synchronizing, your bracelet can also wake you up even the App is unconnected.
Finding Bracelet:
When connected the App, you can click the finding bracelet function and your bracelet will vibrate.
Remote Control Taking Photos:
When connected “Fitpro”, you can take photos by the App. Shake, flip, touch the bracelet can take photos automatically after 3s. (Please allow “Fitpro” the access to your album)
Sedentary:
You can set the time to remind you if you sit for a long time within your setting time.
Raise your Hand to Turn on the screen:
When the screen is off, you can turn the screen towards you to turn on the screen. When you put down your bracelet, the screen will turn off.
Do Not Disturb Mode:
It allows you to set a Do Not Disturb Time. During this time, you will not receive any message.
Device Reset:
This function will eliminate all data of your Bracelet. Remove Device: It will remove all data and remove your Bracelet.

Specification:

Note:

1. Do not use when bathing and swimming.
2. Please connect your bracelet when updating data.
3. Please use the original charging cable.
4. Do not expose your bracelet in high moisture, extremely high/low temperature for a long time.
5. If the bracelet crashes, please check and clear the memory and turn on again.

Package Includes:

• 1* Bracelet Screen
• 1* Wrist Strap
• 1* USB Charger
• 1* User Manual
• 1* Packing Box

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>