wet sounds 0001 A-Link Plus Send and Receive Kit User Manual
- June 5, 2024
- wet sounds
Table of Contents
wet sounds 0001 A-Link Plus Send and Receive Kit
Congratulations!
Thank You for purchasing the Wet Sounds a link plus kit! Wet Sounds products
represent the ultimate in high performance, element-proof audio. Wet Sounds
products are specifically designed and engineered to withstand the rigorous
marine and outdoor environments. The Wet Sounds a link plus is a wireless
audio link that allows broadcasting from one audio system to another. Each a
link plus can be set to either send or receive audio as needed. Up to four (4)
a link plus units can be bonded to receive the same audio from one (1)
broadcasting a link plus, allowing for a shared experience through multiple
audio systems. Please take a moment to look over this owners manual before
enjoying the product.
controls / indicators
limited warranty
This is a “limited” warranty. This warranty covers any defect in materials and
workmanship. This warranty only covers the original purchaser and is not
transferable. This warranty is also only valid if the original purchase was
made from an authorized Wet Sounds TM dealer.
How Long Coverage Lasts
This warranty extends for 2 years from the date of purchase. It is recommended
to REGISTER your warranty online within 45 days of purchase at
www.wetsounds.com – click on “warranty
registration”.
What Is Not Covered
This warranty does not cover fading or discoloration caused by exposure to
sunlight or chemicals such as ammonia, household bleach, or any cleaning
material that contains abrasive substances. Wet Sounds, Inc. does not cover
the expense for removal or reinstallation. Additionally, shipping TO Wet
Sounds, Inc. must be paid for by the purchaser. This warranty is void and
inapplicable is Wet Sounds deems that the product was abused or misused;
including but not limited to damage caused by accident, mishandling, improper
installation, removing the inline fuse on the power connection, negligence,
normal; wear and tear, excessive water or heat damage, freight/shipping
damage, or products that have been disassembled by anyone other than Wet
Sounds technical staff. Wet Sounds will not be responsible for any incidental
or consequential damages, except to the extent provided (or prohibited) by
applicable law. This warranty gives you specific rights, and you may also have
other rights which vary from state to state.
What Wet Sounds, Inc. Will Do
Wet Sounds, Inc. will repair any part of your product that proves to be
defective in materials or workmanship. In the event repair is not possible,
Wet Sounds will replace the product in question. If it is deemed necessary Wet
Sounds, Inc. will either replace the entire product with a refurbished unit or
it will be replaced with a model that is similar in price is that model is no
longer available. Labor costs and materials needed to complete this service
will be at No Charge to the purchaser. Additionally, return shipping FROM Wet
Sounds, Inc. to the purchaser will be paid for by Wet Sounds.
How To Get Service
Contact Wet Sounds, Inc. either by phone
(877-938-7757) or by email
(warranty@wetsounds.com). A service
representative will assist you in confirming that the problem you are
experiencing is caused by a defective product and if that product is covered
under warranty. The service representative will issue you a Return
Manufacturer’s Authorization (RMA) and other details to obtain service for
your product.
DO NOT RETURN YOUR PRODUCT WITHOUT THE PROPER RETURN AUTHORIZATION (RMA)!
Internet Warning
Wet Sounds, Inc. products sold on any non-authorized web site or internet
auction site are void of any and all manufacturer’s warranty. Please contact
Wet Sounds (877-938-7757) or visit our
web site (www. wetsounds.com) for a list of authorized online sellers or to
find an authorized installing retailer near you.
WET SOUNDS, INC. www.wetsounds.com •
877-938-7757 10621 S Sam Houston PKWY W
• Suite 100 Houston, Texas 77071 USA
essential functions*
the button allows you to select which a link plus you’re listening to.
other features
a link plus features an integrated cradle, which is attached with a slide-lock feature.
installation / placement
in order to ensure optimal performance and range, a link plus should be mounted with the top half of the housing placed above all body panels, windows, roll bars etc.
a link plus comes with two (2) suction cups pre-installed in the cradle. These can be used to mount a link plus to glass or other smooth, glossy surfaces. (verify both the mounting surface and suction cups are clean before mounting to ensure proper adhesion)
for more permanent mounting or for mounting to rough surfaces, the suction cups can be removed from cradle. the cradle can then be hard-mounted using M6 screws (not included) in the marked locations.
The SKAA Compatible Badge as well as the graphics-only version of it, the SKAA Icon, both found on the Product itself, certify that this Product has been tested and is fully compliant with all of the requirements of the SKAA Standard and has been granted SKAA Certification. This Product will work seamlessly with other products in the SKAA ecosystem of audio transmitting and receiving devices. For more information on the SKAA Standard, please visit www.SKAA.com. The SKAA® name as well as its associated marks, logos and icons are trademarks or registered trademarks of Eleven Engineering Incorporated
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. This
device and its antenna(s) must not be co-located or operation in conjunction
with any other antenna or transmitter.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003. Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
IC Radiation Exposure Statement:
This equipment complies with IC RSS_102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>