motorola MOTO BUDS 250 True Wireless Bluetooth Earbuds User Guide
- June 4, 2024
- Motorola
Table of Contents
MOTO BUDS 250 True Wireless Bluetooth Earbuds
User Guide
Model No. : MOTO BUDS 250
Frequency Band: 2.402 – 2.480GHz
Maximum RF power: 6 dBm
FCC ID: 2ARRB-MB250
IC: 20353-MB250
Working temperature: -10°C–45°C
Charging:
Fully charge before use
The device can be powered through a USB-C from any CE-compliant power source
that implements the European interface as requested by EN 301 489-52.
Pairing:
2.1 Ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red.
2.2 Select “MOTO BUDS 250″ from the smartphone Bluetooth menu.
Fitting:
3.1 To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
3.2 Insert the MOTO BDS into your ear and rotate to fit comfortably.
Basic Operation:
Additional Operation
| Reject a call | MFB 2sec |
|---|---|
| Receive incoming and on-hold ongoing call | Single Press MFB |
LED Indicator
Pairing| Red-blue flash
Standby| Blue flash
Charging| Red steady
Fully charged| Off
Battery low| Red flash
FCC and IC regulations (FCC Part 15)
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the Federal
Communications Commission (FCC) rules.
Industry Canada. This device complies with Industry Canada license-exempt
RSS standard(s): Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Disposal of the Device (environment)
At the end of the product life cycle, you should not dispose of this product
with normal household waste. Take this product to a collection point for the
recycling of electrical and electronic equipment. The symbol on the product,
user’s guide, and/ or box indicates this.
Some of the product materials can be re-used if you take them to a recycling
point. By reusing some parts or raw materials from used products you make an
important contribution to the protection of the environment. Please contact
your local authorities in case you need more information on the collection
points in your area.
European Union Directives Conformance Statement The following CE compliance
information is applicable to Motorola products that carry one of the following
CE marks:
**** Hereby, MZGW declares that this product is in compliance with:
- The essential requirements and other relevant provisions of RED Directive 2014/53/EU
- All other relevant EU Directives
- The Declaration of Conformity can be obtained at motorolasound.com
UK Declaration of Conformity
Hereby, MZGW declares that this product is in compliance with the requirements
for UKCA marking. The Declaration of Conformity can be obtained at
motorolasound.com
Imported and distributed by: A.I.&E., Adriaan Mulderweg 9-11, 5657 EM
Eindhoven, The Netherlands. Edco UK Ltd, 1st Floor, Two Chamberlain Square,
Birmingham, B3 3AX, UK.
Global V7