ASRock NUC-1360P-D4 High Definition Multimedia Interface Installation Guide
- May 15, 2024
- ASRock
Table of Contents
NUC-1360P/D4
NUC-1340P/D4
NUC-1365UE/D4
NUC-1335UE/D4
NUC-1315UE/D4
NUC-1315U/D4
Jumpers and Headers Setting Guide
The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Revision History
| Date | Description |
|---|---|
| December 8, 2022 | First Release |
| April 19, 2023 | Second Release |
| September 14, 2023 | Third Release |
| January 18, 2024 | Fourth Release |
-
M.2 Key-M Socket (M2_M1)
Pin| Signal| Signal| Pin
---|---|---|---
1| GND| +3.3V| 2
3| GND| +3.3V| 4
5| PERn3| NC| 6
7| PERp3| NC| 8
9| GND| | 10
11| PETn3| +3.3V| 12
13| PETp3| +3.3V| 14
15| GND| +3.3V| 16
17| PERn2| +3.3V| 18
19| PERp2| NA| 20
21| GND| NA| 22
23| PETn2| NA| 24
25| PETp2| NA| 26
27| GND| NA| 28
29| PERn1| NA| 30
31| PERp1| NA| 32
33| GND| NA| 34
35| PETn1| NA| 36
37| PETp1| | 38
39| GND| NA| 40
41| PERn0| NA| 42
43| PERp0| NA| 44
45| GND| NA| 46
47| PETn0| NA| 48
49| PETp0| PERST#| 50
51| GND| CLKREQ#| 52
53| PEFCLKn| WAKE#| 54
55| PEFCLKp| NA| 56
57| GND| NA| 58
67| NA| NA| 68
69| PEDET| +3.3V| 70
71| GND| +3.3V| 72
73| GND| +3.3V| 74
75| GND| | -
M.2 Key-E Socket (M2_E1)
Pin| Signal| Signal| Pin
---|---|---|---
1| GND| +3.3V| 2
3| USB_D+| +3.3V| 4
5| USB_D-| NA| 6
7| GND| NA| 8
9| CNV_WGR_D1-| CNV_RF_RESET| 10
11| CNV_WGR_D1+| NA| 12
13| GND| MODEM_CLKREQ| 14
15| CNV_WGR_D0-| NA| 16
17| CNV_WGR_D0+| GND| 18
19| GND| NA| 20
21| CNV_WGR_CLK-| CNV_BRI_RSP| 22
23| CNV_WGR_CLK+| |
| | |
33| GND| CNV_BGI_DT| 32
35| PETp| CNV_RGI_RSP| 34
37| PETn| CNV_BRI_DT| 36
39| GND| NA| 38
41| PERp| NA| 40
43| PERn| NA| 42
45| GND| NA| 44
47| PEFCLKp| NA| 46
49| PEFCLKn| NA| 48
51| GND| SUSCLK| 50
53| CLKREQ#| PERST0#| 52
55| WAKE#| W_DISABLE1#| 54
57| GND| W_DISABLE2#| 56
59| CNV_WT_D1-| NA| 58
61| CNV_WT_D1+| NA| 60
63| GND| NA| 62
65| CNV_WT_D0-| | 64
67| CNV_WT_D0+| NA| 66
69| GND| NA| 68
71| CNV_WT_CLK-| NA| 70
73| CNV_WT_CLK+| +3.3V| 72
75| GND| +3.3V| 74 -
USB 2.0 Connector (USB2_7_8)
Pin| Signal Name| Signal Name| Pin
---|---|---|---
1| USB_PWR| USB_PWR| 2
3| -A| -B| 4
5| +A| +B| 6
7| GND| GND| 8
9| DUMMY| | 10 -
COM Port Header (COM1) (RS-232/422/485)
Pin| Signal Name| Signal Name| Pin
---|---|---|---
1| DDCD#1| RRXD1| 2
3| TTXD1| DDTR#1| 4
5| GND| DDSR#1| 6
7| RRTS#1| CCTS#1| 8
9| RRI#1| | 10
• This motherboard supports RS232/422/485 on COM1 port. Please refer to the
table below for the pin definition. In addition, COM1 port (RS232/422/485) can
be adjusted in BIOS setup utility > Advanced Screen > Super IO Configuration.
You may refer to our manual for details.
COM1 Port Pin Definition
| Pin | RS232 | RS422 | RS485 |
|---|---|---|---|
| 1 | DCD | TX- | RTX- |
| 2 | RXD | RX+ | N/A |
| 3 | TXD | TX+ | RTX+ |
| 4 | DTR | RX- | N/A |
| 5 | GND | GND | GND |
| 6 | DSR | N/A | N/A |
| 7 | RTS | N/A | N/A |
| 8 | CTS | N/A | N/A |
| 9 | N/A | N/A | N/A |
-
Audio Jack (AUDIO1)
-
USB4/Thunderbolt™ 4 Type-C Port (TC_T0)
-
USB 3.2 Gen2 Ports (USB3_3_4)
-
SATA3 Port (SATA3_0)
Pin| Signal Name
---|---
1| GND
2| SATA0_TXP
3| SATA0_TXN
4| GND
5| GND
6| SATA0_RXN
7| SATA0_RXP
8| GND
9| GND
10| GND
11| NC
12| +5V
13| +5V
14| +5V
15| +5V
16| +5V
17| NC
18| GND
19| GND
20| GND -
JP1
1-2 : SIO AT Mode (Default Open: SIO ATX Mode)
4-6 : Clear CMOS
3-4 : Auto Clear CMOS
5-7 : DACC Auto clear CMOS when system boot improperly. -
USB3/DP Type-C Port (TC_UD1)
-
System Panel Header (PANEL1)
Pin| Signal Name| Signal Name| Pin
---|---|---|---
1| HDLED+| PLED+| 2
3| HDLED-| PLED-| 4
5| GND| PWRBTN#| 6
7| RESET#| GND| 8
9| DUMMY| | 10 -
DC-In Jack (DC_IN1)
-
USB 3.2 Gen2 Ports (USB3_1_2)
-
Top : DisplayPort (DP1) Bottom : HDMI Port (HDMI1)
-
RJ-45 LAN Port (LAN2)
-
RJ-45 LAN Port (LAN1)
Back Side : -
Power Button (PWR_BTN1)
-
Fan Connector (FAN1)
Pin| Signal Name
---|---
1| GND
2| +5V
3| FAN_SPEED
4| FAN_SPEED_CONTROL -
Battery Connector (BAT1)
Pin| Signal Name
---|---
1| +BAT
2| GND -
ESPI Connector (ESPI1)
Pin| Signal Name
---|---
1| GND
2| ESPI_CLK
3| GND
4| ESPI_CS#
5| ESPI_RESET#
6| GND
7| +3V
8| GND
9| SMB_CLK
10| SMB_DATA
11| ESPI_IO0
12| ESPI_IO1
13| ESPI_IO2
14| ESPI_IO3
15| GND
16| +3VSB
17| Internal Use
18| Internal Use
19| ESPI_ALERT#
20| GND
Installation of ROM Socket
-
Do not apply force to the actuator cover after ic inserted.
-
Do not apply force to actuator cover when it is opening over 120 degree, Otherwise, the actuator cover may be broken.
-
The yellow dot (Pin1) on the ROM must be installed at pin1 position of the socket.
-
Make sure the white dot on the ROM is installed outwards of the socket.
-
For further details of how to install ROM, please refer to ASRI website.
Warning: If the installation does not follow as the picture, then it may cause severe damage to chipset & MB.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>