Forward HY-DT150B-6IN Heavy Duty Bench Vise 360 Degree Swivel Base and Head User Manual

June 16, 2024
Forward

Forward HY-DT150B-6IN Heavy Duty Bench Vise 360 Degree Swivel Base and

Head

Forward-HY-DT150B-6IN-Heavy-Duty-Bench-Vise-360-Degree-Swivel-Base-and-Head-
product

Product Information

Product Specifications:

Model No. Jaw Width Jaw Opening Throat Depth Pipe Jaw Capacity Net Weight
DT08125A 125mm (5″) 125mm (5″) 67mm (2.6″) 3/5″ – 2 1/2″ 33 lbs
DT150B 152.4mm (6″) 125mm (5″) 66.6mm (2 5/8″) 3/5″ – 2 1/2″ 42 lbs

Product Usage Instructions

Inspection and Acceptance:
Claims for damage, shortage, or errors in shipping must be reported within one (1) day following delivery to Buyer. Buyer shall have seven (7) days from the date Buyer receives any products to inspect such products and services for defects and nonconformity which are not due to damage, shortage, or errors in shipping and notify Seller, in writing, of any defects, rejection or nonconformity such products. Specially fabricated or ordered items may not be canceled or returned, and no refund will be made.

IMPORTANT SAFETY WARNING:
Misuse of the vice can cause serious injury to eyes, hands, limbs, etc. To ensure safety, the vise must be set up and used properly.

Before setting up and using, read, understand, and follow all instructions as outlined below.

IMPORTANT SAFETY INSTRUCTIONS:
Document No. M-DT08125 Edition 3 10/2018

MOUNTING INSTRUCTIONS:

  1. Mount the vice to the work surface in the desired location by securing all mounting flanges located on the base.
  2. Mark and drill holes through the workbench and wood/metal plate using the swivel base as the template for the mounting holes. Before drilling, make sure the area is free & clear of any hazards.
  3. Use Four 7/16 diameter bolts, 2 inches longer than the bench top thickness, flat washers, and nuts.

MOUNTING DIMENSIONS:

NOT TO SCALE
Document No. M-DT08125 Edition 3 10/2018

  • VISE OPERATION: Instructions for vice operation are not provided in the text extract.
  • SWIVEL BASE OPERATION: Instructions for swivel base operation are not provided in the text extract.
  • How to Get Technical Support: Document No. M-DT08125 Edition 3 10/2018

FAQ:
No frequently asked questions (FAQ) are provided in the text extract.

Parts List

Forward-HY-DT150B-6IN-Heavy-Duty-Bench-Vise-360-Degree-Swivel-Base-and-Head-
fig- \(1\)

A HANDLE & MAIN SCREW & NUT ASSY
B JAW PLATES & “V” JAW & SCREWS ASSY
C HEAD LOCKING HANDLE
D SWIVEL BASE & LOCKING PAD & LOCKING NUT ASSY

Inspection and Acceptance

  • Claims for damage, shortage, or errors in shipping must be reported within one (1) day following delivery to Buyer.
  • Buyer shall have seven (7) days from the date Buyer receives any products to inspect such products and services for defects and nonconformity which are not due to damage, shortage, or errors in shipping and notify Seller, in writing, of any defects, rejection or nonconformity such products.
  • Specially fabricated or ordered items may not be cancelled or returned, and no refund will be made.

Product Specifications

MODEL NO. DT08125A DT150B
Jaw Width 125mm (5″) 152.4mm (6″)
Jaw Opening 125mm (5″) 125mm (5″)
Throat Depth 67mm (2.6″) 66.6mm (2 5/8″)
Pipe Jaw Capacity φ 3/5″ -2 1/2″ φ 3/5″ -2 1/2″
Net Weight 33 lbs 42 lbs

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT WARNING

  • Misuse of vise can cause serious injury to eyes, hands, limbs, etc. To ensure safety, vise must be set up and used properly.
  • If there is any question about a condition being safe or unsafe, do not operate the vise. To avoid the risk of personal injury, equipment damage, fire & shock, make sure the work area has the following conditions:
    • The floor is dry. Damp, wet, or rainy conditions can cause the operator to slip.
    • The operator must be of sufficient age to operate the vice in a safe condition.
    • Well Lit. Clean and unobstructed.
    • The workbench is properly secured to the floor or wall.
    • The workbench is designed sufficiently to handle vice and workload (torque placed upon the vise and workbench
  • Before setting up and using, read, understand, and follow all instructions as outlined below.

IMPORTANT INSTRUCTIONS

  1. ALWAYS use appropriate nuts, bolts, and lock washers in all mounting holes.
  2. ALWAYS use a vise of the proper size and capacity to hold work objects.
  3. ALWAYS wear eye, face, and ear protection when striking or using power tools.
  4. ALWAYS wear a dust mask or respirator when working with wood, metal, chemical dust, or mists.
  5. ALWAYS wear restrictive hair covering and anti-slip footwear while operating the vise.
  6. ALWAYS hand tightens handles of lockdowns for swivel base.
  7. ALWAYS inspect the vise for stress fatigue or damage before use.
  8. ALWAYS Regularly maintain the vise by greasing the main screw.
  9. NEVER use a hammer, extension pipe, or cheater bar on the vise’s spindle handle.
  10. NEVER wear loose clothing or jewelry while operating vise
  11. NEVER Welding the vise’s base to any metal object.
  12. NEVER use a vise to press an object into or out of another object.
  13. NEVER use an extension pipe to tighten the handles of lockdowns.
  14. NEVER place pressurized containers or combustible materials in a vise.
  15. NEVER unscrew the movable jaw beyond the vise’s maximum specified opening.
  16. NEVER apply extreme heat or prolonged heat to the vise as it may alter structural properties.

MOUNTING INSTRUCTIONS

  • Mount the vise to the work surface in the desired location by securing all mounting flanges located on the base.
  • For added strength to the workbench before installing and securing the vise, place an 18” x 18” x 2” piece of wood (18” x 18” x ¼” metal plate) to the underneath side.
  • Mark and drill holes through the workbench and wood/metal plate using the swivel base as the template for the mounting holes. Before drilling, make sure the area is free & clear of any hazards.

Use Four 7/16″ diameter bolts, 2 inches longer than the bench top thickness, flat washers, and nuts.

MOUNTING DIMENSIONS

NOT TO SCALE

Forward-HY-DT150B-6IN-Heavy-Duty-Bench-Vise-360-Degree-Swivel-Base-and-Head-
fig- \(2\)

Forward suggests the following optimal configuration: Firstly, insert the appropriate length and diameter bolts, accompanied by a flat washer, into the vise’s swivel base. The bolt should extend at least 2″ beyond the underside of both the workbench and the wood/metal plate. Then, on the underside of these, attach a flat washer, lock washer, and locking nut to the bolt. Finally, ensure the vise is firmly fastened to the workbench. Remember to periodically recheck and tighten the nuts for maximum security.

VISE OPERATION

Make sure the vise selection (size and type) is appropriate for use and application. Larger vises are readily available through Forward Vises.

  • Step 1: Open the vise by turning the vise handle counterclockwise. Do not open beyond the vises rated capacity (jaw opening).
  • Step 2: Place the workpiece between the serrated jaws of the vise.
  • Step 3: Close vise by turning the handle clockwise until the item is snug between the serrated jaws.
  • Step 4: Continue to tighten the screw handle until you can no longer move (twist) the clamped item. Do not over-tighten as this may damage the item and/or the vise.
  • Step 5: When finished working on the item, slowly turn the screw handle counterclockwise to release the item.

SWIVEL BASE OPERATION
The vise, typically positioned perpendicularly to the workbench, allows work from either side. However, for better and safer access to the item, it may need repositioning. Follow these steps to adjust the vise’s position:

  • Step 1: Secure the item in vise and gently loosen each lockdown on vise’s sides. Avoid over-loosening or entirely removing the lockdowns to prevent vise from tipping over, which could cause serious injury. Turn each lockdown about a quarter turn counterclockwise until vise can pivot at base.
  • Step 2: Pivot the vise to improve and secure access to the item.
  • Step 3: Firmly clamp the vise to the base by tightening each lockdown in a clockwise direction.

Forward® offers a 1-year free parts replacement warranty, covers the manufacturer’s defect only, and does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations, or lack of maintenance. The Forward® lifetime technical support is for the product’s lifetime with no end date.

How to Get Technical Support

Please contact Forward® Technical Service by Amazon email system. Please note that you will be asked to provide the Amazon order number of the initial purchase. If a product requires further inspection, the Technical Service representative will explain and assist with any additional action needed.

Forward® reserves the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment that they may deem necessary for any reason whatsoever.

Document No. M-DT08125 Edition 3 10/2018 Copyright © 2018 Forward.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Forward User Manuals

Related Manuals