RHINO RACK MSIT Recovery Track Holder Instruction Manual
- June 17, 2024
- RHINO RACK
Table of Contents
RHINO RACK MSIT Recovery Track Holder
Important:
- Check the Rhino-Rack website to ensure you have the latest issue of these instructions.
- Please refer to your fitting instructions to ensure that the roof racks are installed in the correct locations.
- Check the contents of kit before commencing fitment and report any discrepancies.
- Place these instructions in the vehicle’s glove box after installation is complete.
- These instructions must be followed for the warranty to be upheld.
- Fit Time: 15 mins
Carrying Capacity
Check the vehicle owners handbook for your vehicle manufacturer’s maximum
carrying capacity. Do not exceed the vehicle manufacturer’s maximum roof-
carrying capacity. The weight of the roof racks, that the accessory is
attached to, must also be included in the total vehicle roof load.
In service maintenance checks
- All bolt connections should be checked after driving a short distance when you first install your roof racks.
- All bolted connections should be checked again at regular intervals (weekly is recommended, depending on road conditions, usage, loads and distances traveled).
- All bolted connections should be checked each time they are re-fitted.
- Off-road conditions are more rigorous. Check all bolted connections and your load more regularly.
- Ensure that your vehicle manufacturer’s GVM, and gross axle weights are not exceeded (refer to vehicle owner’s manual).
Torque Settings:
Unless stated otherwise in these instructions, all fasteners should be set to
the following torque settings:
Note for Dealers and Fitters
It is your responsibility to ensure these fitting instructions are given to
the end user or client. These instructions remain the property of Rhino-Rack
Australia Pty. Ltd. and may not be used or changed for any other purpose than
intended.
Warranty
Rhino-Rack product warranty covers the products mentioned on Page 6, Strap
Mounting. Any products not listed on Page 6, Strap Mounting” is at the
consumer’s own risk and the product warranty does not apply. RHINO-RACK
DISCLAIMS ANY RISK AND LIABILITY WITH RESPECT OF SUCH FITMENT AND USE.
Join the herd!
We love creating our products for you and hope you love using them too. For
complete peace of mind, register your product at
www.rhinorack.com/warranty. This way, we
can quickly help you with any future approved fitment warranty claims. And
remember – never to forget to Make Space For Adventure!
Parts List
TOOLS REQUIRED
- T1 – Tape Measure
- T2 – Step Ladder
- T3 – Torque Wrench
STOWING GUIDELINES
OVERVIEW
MOUNTING
HORIZONTAL MOUNTING
HORIZONTAL MOUNTING HARDWARE COMPATIBILITY TABLE
VERTICAL MOUNTING
INSTALLATION INSTRUCTION
- RHINORACK.COM
- Rhino-Rack AUSTRALIA 22A Hanson Pl, Eastern Creek, NSW, 2766
- Rhino-Rack USA 19822 E 22nd Ave, Aurora, CO, 80011
References
- Make Space For Adventure | Rhino-Rack US
- Warranty | Rhino-Rack USA | Rhino-Rack US
- Stow It | Rhino-Rack AU
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>