TELTONIKA GH5200 GPS Worker Badge Plus Instruction Manual

GH5200 GPS Worker Badge Plus

“`html

Product Specifications

• Model: GH5200
• Product Name: Worker Badge Plus
• Version: Quick Manual v1.2
• Telematics
• Micro-SIM Slot
• Microphone
• 5 Configurable Buttons
• Lanyard Belt Clip Fixing
• Battery Connectors: Micro-USB

Product Usage Instructions

Know Your Device

Top View:

• Battery LED
• GSM LED
• GPS LED

Bottom View (Without Cover):

• Micro-SIM Slot
• Microphone
• 5 Buttons Configurable
• Lanyard Belt Clip Fixing
• Speaker
• Connector
• Battery Connectors (Micro-USB)

Set Up Your Device

1. Cover Opening: Remove the cover.

2. Micro-SIM Card Insert: Insert Micro-SIM card
   with PIN request disabled.

3. Turn On: After inserting the Micro-SIM card,
   turn on the device.

4. Attaching Cover Back: Reattach the cover
   securely.

PC Connection (Windows)

1. Install USB Drivers (Windows):

2. Please download COM port drivers from the provided link.

3. Extract and run TeltonikaCOMDriver.exe.

4. Follow the installation instructions to complete the
   setup.

5. Configuration (Windows):

The device comes with default factory settings. Use Teltonika
Configurator software to configure the device according to your
needs.

.NET Requirements

• Operating System: Windows Vista, Windows 7, Windows 8.1,
  Windows 10

• .NET Framework Version: .NET Framework 4.6.2 (32 and 64
  bit)

• .NET Framework Download Link: Download
  .NET Framework

Frequently Asked Questions (FAQ)

Q: How do I know if my device is turned on?

A: When the device is turned on, the LED should start
blinking.

Q: Where can I find the latest Configurator versions?

A: You can get the latest Configurator versions from the
provided link.

Q: How do I save changes made to the device configuration?

A: After any modification of configuration, save the changes to
the device using the ‘Save to device’ button in the Configurator
software.

“`

GH5200
Worker Badge Plus
Quick Manual v1.2

CONTENT
Know your device…………………………………………………………………………………………………………………………………………………………………………3 Set up your device ……………………………………………………………………………………………………………………………………………………………………….4 PC Connection (Windows)…………………………………………………………………………………………………………………………………………………………….5 How to install USB drivers (Windows) …………………………………………………………………………………………………………………………………………..5 Configuration(WINDOWS) …………………………………………………………………………………………………………………………………………………………….6 QUICK SMS CONFIGURATION……………………………………………………………………………………………………………………………………………………….8 Default configuration settings………………………………………………………………………………………………………………………………………………………9 Troubleshooting……………………………………………………………………………………………………………………………………………………………………….. 10 Mounting recommendations…………………………………………………………………………………………………………………………………………………….. 10 Led indications …………………………………………………………………………………………………………………………………………………………………………. 11 Basic characteristics …………………………………………………………………………………………………………………………………………………………………. 11 Safety information ……………………………………………………………………………………………………………………………………………………………………. 14 Certification and Approvals ………………………………………………………………………………………………………………………………………………………. 16 Warranty ………………………………………………………………………………………………………………………………………………………………………………….. 16 Warranty disclaimer …………………………………………………………………………………………………………………………………………………………………. 17

Telematics

Quick Manual v1.2 // GH5200 2

KNOW YOUR DEVICE

TOP VIEW
BATTERY LED

GSM

GPS

LED

LED

BOTTOM VIEW (WITHOUT COVER)
MICRO-SIM SLOT

MICROPHONE

5 BUTTONS CONFIGURABLE

LANYARD BELT CLIP FIXING

SPEAKER

SPEAKER
CONNECTOR

SPEAKER

BATTERY CONNECTORS

MICRO-USB

Telematics

Quick Manual v1.2 // GH5200 3

SET UP YOUR DEVICE
HOW TO INSERT MICTO-SIM CARD AND CONNECT THE BATTERY

1 COVER OPENING Remove the cover.

2 MICRO-SIM CARD INSERT

3 TURN ON

4 ATTACHING COVER BACK

Insert Micro-SIM card as shown with PIN request disabled or read Wiki1 how to enter it later in Teltonika Configurator2. Make sure that Micro-SIM card cut- off corner is pointing forward to slot.

Insert the battery as shown to device. Position the battery in place where it does not obstruct other components.

After configuration, see PC Connection (WINDOWS)1. When it is done, reattach the cover and push it in place.
1Page 5, “PC Connection (Windows)”

1https://wiki.teltonika-gps.com/ view/GH5200_Security_info
2 wiki.teltonika-gps.com/view/ Teltonika_Configurator

PC CONNECTION (WINDOWS)
1. Turn on your device by holding the power button for around 7 seconds. 2. Connect device to computer using Magnetic USB cable or Bluetooth® connection:
· Using Magnetic USB cable · You will need to install USB drivers, see “How to install USB drivers (Windows)1”
· Using Bluetooth® wireless technology · GH5200 Bluetooth® technology is enabled by default. Turn on Bluetooth® connection on your PC, then select Add Bluetooth or other device > Bluetooth. Choose your device named ­ “GH5200_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect and then select Done.
3. You are now ready to use the device on your computer.

1Page 5, “How to install USB drivers (Windows)”
HOW TO INSTALL USB DRIVERS (WINDOWS)
1. Please download COM port drivers from here1. 2. Extract and run TeltonikaCOMDriver.exe. 3. Click Next in driver installation window. 4. In the following window click Install button. 5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the
setup.
1wiki.teltonika-gps.com/images/d/d0/TeltonikaCOMDriver.zip

Telematics

Quick Manual v1.2 // GH5200 5

CONFIGURATION (WINDOWS)
At first the device will have default factory settings set, unless pre- configured device settings are ordered. These settings should be changed according to the user’s needs. Main configuration can be performed via Teltonika Configurator1 software. Get the latest Configurator versions from here2. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
1wiki.teltonika-gps.com/view/Teltonika_Configurator
2wiki.teltonika-gps.com/view/GH5200_Stable_firmware

MS .NET REQUIREMENTS
Operating system
Windows Vista Windows 7 Windows 8.1 Windows 10

MS .NET Framework version Version

MS .NET Framework 4.6.2

32 and 64 bit

1dotnet.microsoft.com/en-us/download/dotnet-framework

Links www.microsoft.com1

Telematics

Quick Manual v1.2 // GH5200 6

Various Status window1 tabs display information about GNSS2, GSM3, I/O4, Maintenance5 and etc. GH5200 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality:

Downloaded Configurator will be in compressed archive.
Extract it and launch Configurator.exe. After launch software
language can be changed by clicking in the right bottom corner. Turn On device by connecting Magnetic USB cable or pressing Power On button for 2 sec. When device is turned on LED should start blinking.

Load from device ­ loads configuration from device. Save to device ­ saves configuration to device. Load from file ­ loads configuration from file. Save to file ­ saves configuration to file.

Update firmware ­ updates firmware on device.

Configuration process begins by pressing on connected device.

Read records ­ reads records from the device. Reboot device ­ restarts device.

After connection to Configurator Status window will be displayed.

Reset configuration ­ sets device configuration to default.
Most important configurator section is GPRS ­ where all your server and GPRS settings6 can be configured and Data Acquisition7 ­ where data acquiring parameters can be configured. More details about GH5200 configuration using Configurator can be found in our Wiki8.
1 wiki.teltonika-gps.com/view/GH5200_Status_info 2 wiki.teltonika- gps.com/view/GH5200_Status_info#GNSS_Info 3 wiki.teltonika- gps.com/view/GH5200_Status_info#GSM_Info 4 wiki.teltonika- gps.com/view/GH5200_Status_info#I.2FO_Info 5 wiki.teltonika- gps.com/view/GH5200_Status_info#Maintenance 6 wiki.teltonika- gps.com/view/GH5200_GPRS_settings 7 wiki.teltonika- gps.com/view/GH5200_Data_acquisition_settings 8 wiki.teltonika- gps.com/view/GH5200_Configuration

Telematics

Quick Manual v1.2 // GH5200 7

QUICK SMS CONFIGURATION

Default configuration has optimal parameters present to ensure best performance of track quality and data usage. Quickly set up your device by sending this SMS command to it:

« setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0»

1

2

3

4

5

6

Note: Before SMS text, two space symbols should be inserted.

GPRS SETTINGS: 1 2001 ­ APN

2 2002 ­ APN username (if there are no APN username, empty field should be left)

3

2003 ­ APN password (if there are no APN password, empty field should be left)

SERVER SETTINGS: 4 2004 ­ Domain 5 2005 ­ Port 6 2006 ­ Data sending protocol (0 ­ TCP, 1 ­ UDP)

Telematics

Quick Manual v1.2 // GH5200 8

DEFAULT CONFIGURATION SETTINGS
MOVEMENT AND IGNITION DETECTION:
MOVEMENT will be detected by accelerometer

DEVICE MAKES A RECORD ON MOVING IF ONE OF THESE EVENTS HAPPEN:
120 seconds passes
ANGLE DIFFERENCE between last coordinate and current position is greater than 10° degrees

TRAVELED DISTANCE 100 meters
SPEED DIFFERENCE between last coordinate and current position is greater than 10 km/h

DEVICE MAKES A RECORD ON STOP IF:

RECORDS SENDING TO SERVER:

1 Hour passes

IF DEVICE HAS MADE A RECORD 120 sec on move and 600 send on stop

After successful SMS configuration, GH5200 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator1 or SMS parameters2.
1wiki.teltonika-gps.com/view/Teltonika_Configurator_Introduction 2wiki .teltonika-gps.com/view/GH5200_Parameter_list

Telematics

Quick Manual v1.2 // GH5200 9

TROUBLESHOOTING
GH5200 DOESN’T SEND DATA TO YOUR CONFIGURED SERVER: · Check if the device is turned on. · Check if the SIM card is properly inserted. · Check if the device has registered to the network. · Data Acquisition settings are configured correctly. · Check if your APN, Domain and Port are entered correctly and GPRS
IF THE DEVICE IS NOT DETECTED BY THE PC OR CONFIGURATOR WHILE PLUGGED IN: · Check if the device is turned on and the battery is charged to aS · sufficient level. · Try using a different COM port. · Try different Micro-USB cable. · Reinstall Teltonika COM Driver. · Reinstall MS .NET Framework.
If these recommendations did not help, please contact your sales manager or contact us directly through Teltonika VipHelpDesk. Find recommendations on how to fill in a query in our FAQ page in the Teltonika Wiki Knowledge base.
MOUNTING RECOMMENDATIONS
We recommend using the device in such a way, that device buttons an LEDs are easily and quickly accessible. When using the Man-down feature, the device must be stably fixed in the configured base position.

Telematics

Quick Manual v1.2 // GH5200 10

LED INDICATIONS

DEFAULT STATUS LED INDICATIONS

BEHAVIOUR

MEANING

Red LED flashes frequently

GSM Error

Green LED flashes frequently

No GPS Fix

Green LED flashes rarely

GPS Fix

Red LED and

Device off

vibration on for 2 sec +Audio

Green LED and

Device on

vibration on for 2 sec +Audio

Green LED flashes periodically

I Am Alive

Green LED flashes periodically

Charging

Green LED on all the time

Fully Charged

Red LED flashes

Charger Error

Red LED flashes when the level of the Battery Low battery is 10%

Telematics

BASIC CHARACTERISTICS

MODULE Name Technology

Teltonika TM2500
2G (GSM/GPRS) / GNSS/ BLUETOOTH® LE(4.0 + LE)

GNSS GNSS Receiver Tracking sensitivity Position accuracy Velocity accuracy Hot start Warm start Cold start

GPS, GLONASS, GALILEO, BEIDOU Tracking: 33 -165 dBM < 3 m < 0.1m/s (within +/- 15% error) < 1 s < 25 s < 35 s

CELLUAR Technology 2G bands
Data transfer Data support

GSM/GPRS
Quad-band GSM 850 / 900 / 1800 / 1900 MHz
GPRS: Max 107Kbps (DL)/Max 85.6Kbps (UL)
SMS (Text/Data)

Quick Manual v1.2 // GH5200 11

POWER Internal battery

3.7 V 1050 mAh rechargeable Lithium-ion battery

BLUETOOTH® TECHNOLOGY

Specification

4.0 + LE

Supported peripherals

Bluetooth® LE Movement sensors, LE Magnet sensors, LE Temperature and Humidity sensors and LE Temperature sensors support, iBeacon and Eddystone beacon support

PHYSICAL SPECIFICATION

Dimensions

95 x 64 x 11 mm (L x W x H)

Weight

80 g

INTERFACE GNSS antenna Cellular antenna USB LED indication SIM Memory

Internal High Gain Internal GSM High Gain Micro USB Cable 3 Bi-Color LED’s Micro-SIM 128 MB internal flash memory

Telematics

OPERATING ENVIRONMENT

Operating humidity Under 85% non-condensing

Ingress Protection Rating

IP30

Battery charge temperature

0 °C to +45 °C

Battery discharge temperature

-20 °C to +58 °C

Battery storage temperature

-20 °C to +60°C for 1 month; -5 °C to +30°C for 6 months

FEATURES Sensors
Scenarios
Sleep modes

Accelerometer
Tracking on Move/Stop, Real Time tracking, Alarm button, Man-Down Detection, Home Zone, Proximity Detection Amber Alert, Inside Tracking, Movement/No Movement Events, Auto Geofence, Manual Geofence, Over Speeding, Action On Call, Power On/Off event, Event on a Pressed Button, On Demand tracking via button press, Beacon On Demand tracking, Xiaomi Mi Band 2 heart rate measurement and heart rate range exit alerts, Race Mode, Universal Beacons/ Sensors support
Online Deep Sleep, Deep Sleep, Ultra Deep Sleep, GPS Sleep, Low power mode
Quick Manual v1.2 // GH5200 12

Configuration and firmware update
SMS
GPRS commands Time Synchronization

FOTA Web, Teltonika Configurator (USB, Bluetooth® wireless technology) Configuration, Events, Debug Configuration, Debug
GNSS, NITZ, NTP

CERTIFICATION & APPROVALS

Regulatory

CE/RED, EAC, UKCA, RoHS, REACH

Telematics

Quick Manual v1.2 // GH5200 13

SAFETY INFORMATION
This message contains information on how to operate GH5200 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
Limit the use of device in vehicles Please follow all restrictions. Wireless devices can interfere with other electronic equipment in vehicles.
Interference All wireless devices are sensitive to electromagnetic interference, as a result wireless devices affect the performance of each other.
Road safety first Comply with local traffic laws, always hold your hands on a steering wheel when using a device. Your safety is of importance when you drive.
Operate the device in suitable conditions Do not use the device where mobile connectivity is forbidden.
Limit the use of device in hospitals Please follow all restrictions. Turn off the device in the vicinity of medical devices when required
Be cautious near flammable materials and liquids
Telematics

Charging precautions SELV LPS chargers, personal computers or laptops that device will be connected to must comply with the requirements of IEC 60950:2005 standard.
Use only original batteries Using uncertified manufacturer or different type batteries may cause the device to malfunction or even explode
Use batteries safely Protect batteries from moisture. Place them in a cool and dry place when storing. Avoid extensive operation at high temperatures. Do not attempt charging battery directly from the electrical mains. All utilised batteries shall comply with IEC 62133.
Power supplies Power supply circuits used to charge the device connection must have safeguards, which prevent power leakage, short circuits or in- correct electrical grounding. Any used switches ought to be installed in a readily accessible location. Power must be uninterrupted and the distance between the contacts must be 3 mm or larger.
Other In order to prevent device from mechanical damage it is advisable to transport it in a shock­resistant packaging. If device stopped working properly regardless of the settings only a qualified specialist can help. It is recommended to contact your local seller or your UAB Teltonika manager in such a case.
Use the right screwdriver In order to prevent device’s cover from mechanical damage it is recommended to use screwdriver, which is included in the package. Do not use electrical screwdrivers.
Quick Manual v1.2 // GH5200 14

Remove device safely Device must be disconnected from computer or charger by unplugging the magnetic USB cable from the device.
Do not short circuit the battery or charging contacts. Exposing the metal strips of the battery to a close contact with a metallic object, such a coin, a clip or a set of keys can cause accidental short-circuiting and damage battery and other components.
To be able to disconnect the charging cable from the mains as quickly as possible in the event of a failure, connect the power supply unit where it is easily accessible.
Charging precautions Do not attempt to charge a wet device.
If you notice any visible damage to your GPS tracker or charging cable, do not use it
Battery should not be disposed of with general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them to the battery recycle bin found in stores.
Never place the GPS tracker near an open fire or hot surfaces.
Do not immerse the device in any liquids including salt water, ionized water, or soapy water, or alcoholic beverage. Liquid damage not covered under warranty.
Telematics

If you carry out repairs yourself, connect the GPS tracker incorrectly or operate it incorrectly, liability and warranty claims are excluded.
Make sure that the GPS tracker (also when charging the battery) is kept away from heat sources and high temperatures, such as direct sunlight in a vehicle. Disregarding of this instruction may result in destruction of the battery and overheating, explosion and fire.
Do not remove the battery with sharp or pointed objects. Do not drop, disassemble or modify it.
Use only Teltonika Telematics approved batteries for replacement. Using uncertified manufacturer or different type batterie may cause the device to malfunction or even explode.
If device is stored for a longer time, we recommend to remove battery from the device to prevent damage to battery life.
Only use the original accessories or accessories with approved by technical support for the charging process. If the battery is charged otherwise, this may result in overheating, explosion or fire.
Use only the original parts supplied to charge the GPS tracker. If the charging cable is damaged, replace it only with original accessories from the manufacturer or parts approved by our support team.
Quick Manual v1.2 // GH5200 15

CERTIFICATION AND APPROVALS

This sign on the package means that it is necessary to read the Users Manual before your start using the device. Full Users Manual version can be found in our Wiki1.
1wiki.teltonika-gps.com/view/GH5200

This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by UAB Teltonika Telematics is under license. Other trademarks and trade names are those of their respective owners.

CHECK ALL CERTIFICATES
All newest certificates may be found in our Wiki2. 2 wiki.teltonika- gps.com/view/GH5200Certification%26_Approvals

WARRANTY
We guarantee our products 24-month warranty1 period. All batteries carry a 6-month warranty period. Post-warranty repair service for products is not provided. If a product stops operating within this specific warranty time, the product can be: · Repaired · Replaced with a new product · Replaced with an equivalent repaired product fulfilling the same functionality · Replaced with a different product fulfilling the same functionality in case of EOL for the original product
1Additional agreement for an extended warranty period can be agreed upon separately.

Telematics

Quick Manual v1.2 // GH5200 16

WARRANTY DISCLAIMER
· Customers are only allowed to return products as a result of the product being defective, due to order assembly or manufacturing fault.
· Products are intended to be used by personnel with training and experience. · Warranty does not cover defects or malfunctions caused by accidents, misuse, abuse, catastrophes, improper maintenance
or inadequate installation ­ not following operating instructions (including failure to heed warnings) or use with equipment with which it is not intended to be used. · Warranty does not apply to any consequential damages. · Warranty is not applicable for supplementary product equipment (i. e. PSU, power cables, antennas) unless the accessory is defective on arrival. · More information on what is RMA1
1 wiki.teltonika-gps.com/view/RMA_guidelines

Telematics

Quick Manual v1.2 // GH5200 17

References

• Download .NET Framework | Free official downloads

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>