ASRock A620M-HDVP Motherboard User Manual

ASRock A620M-HDVP Motherboard

Specifications

• Platform: A620M-HDVP
• CPU: Processors (Refer to CPU Support List on ASRock’s website)
• Chipset: (Not specified)
• Memory: Profiles for Overclocking (EXPO) memory modules (Refer to Memory Support List on ASRock’s website)
• Expansion Slot: (Not specified)
• Graphics: (Not specified)
• Audio: (Not specified)
• LAN: (Not specified)
• USB: All USB ports support ESD Protection
• Rear Panel I/O: Supports NVMe SSD as boot disks
• Storage: Supports RAID with additional M.2 NVMe expansion cards
• Connector: Various fan power support
• BIOS Feature: (Not specified)
• OS Certifications: (Not specified)

Product Usage Instructions

1. Chapter 1: Introduction
   Thank you for choosing the ASRock A620M-HDVP motherboard. This guide will help you with the installation and setup of your new motherboard.

2. Chapter 2: Installation

3. Installing the CPU
   Follow the detailed instructions provided in the manual to correctly install the CPU into the motherboard socket.

4. Installing the CPU Fan and Heatsink
   Attach the CPU fan and heatsink securely onto the CPU to ensure proper cooling during operation.

Frequently Asked Questions (FAQ)

• Q: Where can I find more information about ASRock products?
  A: You can visit ASRock’s website at http://www.asrock.com for detailed product information and support.

• Q: How do I contact ASRock for technical support?
  A: For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp or contact ASRock via email at [email protected] .

Contact Information

If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com ; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp

• ASRock Incorporation
  e-mail: [email protected]

• ASRock EUROPE B.V.
  e-mail: [email protected]

• ASRock America, Inc.
  e-mail: [email protected]

Scan the QR code to view more manuals and documents.

Chapter 1 Introduction

Thank you for purchasing ASRock A620M-HDVP motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.

Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice. In case any modifications of this documentation occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com .

Package Contents

• ASRock A620M-HDVP Motherboard (Micro ATX Form Factor)
• ASRock A620M-HDVP User Manual
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 1 x I/O Panel Shield

Specifications

• Supports AMD Socket AM5 RyzenTM 8000 and 7000 Series Processors*
• Please refer to CPU Support List on ASRock’s website for more information. ( http://www.asrock.com/ )

Chipset| •    AMD A620
Memory|

• Dual Channel DDR5 Memory Technology
• 2 x DDR5 DIMM Slots
• Supports DDR5 ECC/non-ECC, un-buffered memory up to 7200+(OC)*
• Max. capacity of system memory: 96GB
• Supports Extreme Memory Profile (XMP) and EXTended Profiles for Overclocking (EXPO) memory modules
• Please refer to Memory Support List on ASRock’s website for more information.( http://www.asrock.com/  )

Expansion Slot| CPU:

• 1 x PCIe 4.0 x16 Slot (PCIE1), supports x16 mode* Chipset:
• 2 x PCIe 3.0 x1 Slots (PCIE2 and PCIE3)*
• 1 x PCI Slot
• Supports NVMe SSD as boot disks
• 15μ Gold Contact in VGA PCIe Slot (PCIE1)

Graphics|

• Integrated AMD RDNATM graphics (Actual support may vary by CPU)
• 1 x HDMI 2.0 TMDS/FRL 6G Compatible, supports HDR, HDCP 2.3 and max. resolution up to 4K 60Hz
• 1 x DisplayPort 1.4 with DSC (compressed), supports HDCP 2.3 and max. resolution up to 4K 120Hz
• 1 x DVI-D, supports max. resolution up to Full HD (1920×1200) 60Hz
• 1 x D-Sub, supports max. resolution up to Full HD (1920×1080) 60Hz

• Gigabit LAN 10/100/1000 Mb/s
• Realtek RTL8111H

USB| CPU:

• 4 x USB 3.2 Gen1 Type-A (Rear)

Chipset:

• 1 x USB 3.2 Gen2 Type-C (Rear)
• 1 x USB 3.2 Gen2 Type-A (Rear)
• 2 x USB 3.2 Gen1 Type-A (Front)
• 4 x USB 2.0 (Front)
• All USB ports support ESD Protection

Rear Panel I/O|

• 1 x PS/2 Mouse Port
• 1 x PS/2 Keyboard Port
• 1 x Serial Port: COM2
• 1 x D-Sub Port
• 1 x DVI-D Port
• 1 x HDMI Port
• 1 x DisplayPort 1.4
• 1 x USB 3.2 Gen2 Type-A Port (10 Gb/s)
• 1 x USB 3.2 Gen2 Type-C Port (10 Gb/s)
• 4 x USB 3.2 Gen1 Type-A Ports
• 1 x RJ-45 LAN Port
• HD Audio Jacks: Line in / Front Speaker / Microphone

Storage| CPU:

• 1 x Hyper M.2 Socket (M2_1, Key M), supports type 2280 PCIe Gen4x4 (64 Gb/s) mode*
• 1 x Hyper M.2 Socket (M2_2, Key M), supports type 2280 PCIe Gen4x4 (64 Gb/s) mode*

Chipset:

• 4 x SATA3 6.0 Gb/s Connectors
• Supports NVMe SSD as boot disks

RAID|

• Supports RAID 0, RAID 1 and RAID 10 for SATA storage devices
• Supports RAID 0, RAID 1 and RAID 10 for M.2 NVMe storage devices*
• Requires additional M.2 NVMe expansion cards to support RAID 10

---|---
Connector|

• 1 x Print Port Header
• 1 x SPI TPM Header
• 1 x COM Port Header
• 1 x Chassis Intrusion and Speaker Header
• 1 x CPU Fan Connector (4-pin)*
• 1 x Chassis Fan Connector (4-pin)**
• 1 x Chassis/Water Pump Fan Connector (4-pin) (Smart Fan Speed Control)***
• 1 x 24 pin ATX Power Connector
• 1 x 8 pin 12V Power Connector
• 1 x Front Panel Audio Connector
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)
• 1 x USB 3.2 Gen1 Header (Supports 2 USB 3.2 Gen1 ports)
• CPU_FAN1 supports the fan power up to 1A (12W).
• CHA_FAN2 supports the fan power up to 1A (12W).
• CHA_FAN1/WP support the fan power up to 2A (24W).
• CHA_FAN1/WP can auto detect if 3-pin or 4-pin fan is in use.

BIOS Feature| •    AMI UEFI Legal BIOS with GUI support
OS| •    Microsoft® Windows® 10 64-bit / 11 64-bit
Certifica tions|

• FCC, CE

• ErP/EuP ready (ErP/EuP ready power supply is required)

• For detailed product information, please visit our website: http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.

Motherboard Layout

I/O Panel

• There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

** Function of the Audio Ports in 7.1-channel Configuration:

Chapter 2 Installation

This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.

• Make sure to unplug the power cord before installing or removing the motherboard components. Failure to do so may cause physical injuries and damages to motherboard components.
• In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard.

Installing the CPU

1. Before you insert the 1718-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.

Tutorial Video

• Turn your CPU to the correct orientation before opening the CPU socket cover.
• Carefully place the CPU in as flat as possible. Do not drop it.
• Make sure the CPU is aligned with the socket before locking it into place.
• Make sure the black cover plate is always in place until it pops off when closing the socket lever.

Please save the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.

Installing the CPU Fan and Heatsink
After you install the CPU into this motherboard, it is necessary to install a larger heatsink and cooling fan to dissipate heat. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other.
Please turn off the power or remove the power cord before changing a CPU or heatsink.

Installing the CPU Cooler (Type 1)

Installing the CPU Cooler (Type 2)

*The illustrations shown here are for reference purposes only and may not exactly match the model you purchase.

Installing the CPU Cooler (Type 3)

*The illustrations shown here are for reference purposes only and may not exactly match the model you purchase.

Installing Memory Modules (DIMM)
This motherboard provides two 288-pin DDR5 (Double Data Rate 5) DIMM slots, and supports Dual Channel Memory Technology.

1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR5 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one memory module installed.
3. It is not allowed to install a DDR, DDR2 , DDR3 or DDR4 memory module into a DDR5 slot; otherwise, this motherboard and DIMM may be damaged.
4. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

Recommended Memory Configuration

• The first boot may take some time.
• Please be patient and refer to the following table for booting time. *It may vary by different setups.

• Connecting the Front Panel Header

• Installing the I/O Panel Shield

• Installing the Motherboard

• Installing SATA Drives

• Installing a Graphics Card

Expansion Slots (PCI and PCI Express Slots)
There are 1 PCI slot and 3 PCI Express slots on the motherboard.

Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

• PCI slot:
  The PCI1 slot is used to install expansion cards that have 32-bit PCI interface.

• PCIe slots:

  • PCIE1 (PCIe 4.0 x16 slot) is used for PCIe x16 lane width graphics cards. PCIE2 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.
  • PCIE3 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.

Connecting Peripheral Devices

Connecting the Power Connectors

Power On

Jumpers Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”.

Clear CMOS Jumper
(CLRCMOS1) (see p.5, No. 13)

• CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters.
• To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord, then use a jumper cap to short the pins on CLRCMOS1 for 3 seconds. Please remember to remove the jumper cap after clearing the CMOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action.

Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard.

System Panel Header
(9-pin PANEL1) (see p.5, No. 12)
Connect the power button, reset button and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.

• PWRBTN (Power Button):
  Connect to the power button on the chassis front panel. You may configure the way to turn off your system using the power button.

• RESET (Reset Button):
  Connect to the reset button on the chassis front panel. Press the reset button to restart the computer if the computer freezes and fails to perform a normal restart.

• PLED (System Power LED):
  Connect to the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the system is in S1/S3 sleep state. The LED is off when the system is in S4 sleep state or powered off (S5).

• HDLED (Hard Drive Activity LED):
  Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data.
  The front panel design may differ by chassis. A front panel module mainly consists of power button, reset button, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assignments are matched correctly.

Chassis Intrusion and Speaker Header
(7-pin SPK_CI1) (see p.5, No. 14)
Please connect the chassis intrusion and the chassis speaker to this header.

Serial ATA3 Connectors

• (SATA3_0) (see p.5, No. 10)
• (SATA3_1) (see p.5, No. 11)
• (SATA3_2) (see p.5, No. 8)
• (SATA3_3) (see p.5, No. 9)
• These four SATA3 connectors support SATA data cables for internal storage devices with up to 6.0 Gb/s data transfer rate.

USB 2.0 Headers

• (9-pin USB_1_2) (see p.5, No. 16)
• (9-pin USB_3_4) (see p.5, No. 15)
• There are two headers on this motherboard. Each USB 2.0 header can support two ports.

USB 3.2 Gen1 Header

• (19-pin USB32_6_7) (see p.5, No. 6)
• There is one header on this motherboard. The USB 3.2 Gen1 header can support two ports.

Front Panel Audio Header

• (9-pin HD_AUDIO1) (see p.5, No. 20)
• This header is for connecting audio devices to the front audio panel.
• High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system.

Chassis Fan Connector

• (4-pin CHA_FAN2) (see p.5, No. 17)
• Please connect fan cables to the fan connector and match the black wire to the ground pin.

Chassis/Water Pump Fan Connector

• (4-pin CHA_FAN1/WP) (see p.5, No. 4)
• This motherboard provides one 4-Pin water cooling chassis fan connector. If you plan to connect a 3-Pin chassis water cooler fan, please connect it to Pin 1-3.

CPU Fan Connector

• (4-pin CPU_FAN1) (see p.5, No. 2)
• This motherboard provides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3.

ATX Power Connector

• (24-pin ATXPWR1) (see p.5, No. 5)
• This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin 13.

ATX 12V Power Connector

• (8-pin ATX12V1) (see p.5, No. 1)
• This motherboard provides a 8-pin ATX 12V power connector. To use a 4-pin ATX power supply, please plug it along Pin 1 and Pin 5.
• *Warning: Please make sure that the power cable connected is for the CPU and not the graphics card. Do not plug the PCIe power cable to this connector.

SPI TPM Header

• (13-pin SPI_TPM_J1) (see p.5, No. 7)
• This connector supports SPI Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.

Print Port Header

• (25-pin LPT1) (see p.5, No. 18)
• This is an interface for print port cable that allows convenient connection of printer devices.

Serial Port Header
(9-pin COM1) (see p.5, No. 19)

• This COM1 header supports a serial port module.

M.2 SSD Module Installation Guide (M2_1 and M2_2)
The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2 Sockets (M2_1 and M2_2, Key M) support type 2280 PCIe Gen4x4 (64 Gb/s) mode.

Installing the M.2 SSD Card

• Step 1
  Prepare a M.2 SSD card.

• Step 2
  Depending on the PCB type and length of your M.2 SSD module, find the corresponding nut location to be used.

• Step 3
  Hold the top of the plastic clip and carefully pull the clip pin straight up from the hole.

• Step 4
  Align and gently insert the M.2 SSD module into the M.2 slot. Please be aware that the M.2 SSD module only fits in one orientation.

• Step 5
  Press the M.2 SSD down and insert the clip pin back into the hole until it clicks into place.

For the latest updates of M.2 SSD card support list, please visit our website for details: http://www.asrock.com

Version 1.0

• Published January 2024
• Copyright©2024 ASRock INC. All rights reserved.

Copyright Notice:

• No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
• Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to
  infringe.

Disclaimer:

• Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
• With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
• In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

WARNING
THIS PRODUCT CONTAINS A BUTTOON BATTERY
If swallowed, a button battery can cause serious injury or death. Please keep batteries out of sight or reach of children.

WARNING

• INGESTION HAZARD: This product contains a button cell or coin battery.
• DEATH or serious injury can occur if ingested in as little as 2 hours.
• A swallowed button cell or coin battery can cause Internal Chemical Burns.
• KEEP new and used batteries OUT OF REACH OF CHILDREN Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

For treatment information call: [phone number for the National Battery Ingestion Hotline, currently 1-800-498-8666].

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
• Even used batteries may cause severe injury or death.
• Call a local poison control center for treatment information.
• Battery type: CR2032
• Battery voltage: 3.3V
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns
• This product contains an irreplaceable battery.
• This icon indicates that a swallowed button battery can cause serious injury or death. Please keep batteries out of sight or reach of children.

CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate ”

AUSTRALIA ONLY

• Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)

• ASRock INC. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related UKCA Directives. Full text of UKCA declaration of conformity is available at: http://www.asrock.com

• ASRock INC. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: http://www.asrock.com

• ASRock follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASRock product is in line with global environmental regulations. In addition, ASRock disclose the relevant information based on regulation requirements.

• Please refer to https://www.asrock.com/general/about.asp?cat=Responsibility for information disclosure based on regulation requirements ASRock is complied with.

• DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

CE Warning

• This device complies with directive 2014/53/EU issued by the Commission of the European Community.
• This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

References

• ASRock
• ASRock
• dtsc.ca.gov/hazardouswaste/
• ASRock > Support Request Form
• ASRock > Corporate Social Responsibility

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>