LECO 39309 Katharina Sun Lounger Instruction Manual
- May 15, 2024
- LECO
Table of Contents
LECO 39309 Katharina Sun Lounger
Product Information
Specifications :
- Name: Sonnenliege KATHARINA / Sunlounger KATHARINA / Ligstoel KATHARINA
- Dimensions: ca. 178 / 151 x 64 x 43 / 78 cm
- Max. Load Capacity: 110 KG (1 Person)
- Usage: Private sector only, not for commercial use or as sports/fitness equipment
Product Usage Instructions
Important Notes:
Before assembly, ensure the product meets your expectations and the
packaging is undamaged. Check the kit completeness against the spare part
list. Notify defects or missing parts before assembly to avoid issues. The
manufacturer is not responsible for damages during assembly.
Assembly Instructions:
Follow the provided assembly instructions carefully to set up the
Sonnenliege KATHARINA. Make sure to assemble on an even surface for stability.
Safety Information:
Be cautious when sitting and using the sunlounger. The maximum load
capacity is 110 KG for one person. Clean with a damp cloth and store protected
when not in use.
Usage Guidelines:
This product is intended for private use only. Do not use it commercially
or as sports/fitness equipment. Avoid using on soft lawns; only place it on
flat and even surfaces.
FAQ
-
Q: Can this sunlounger be left outside in the rain?
A: It is recommended to protect the sunlounger from rain and store it indoors when not in use to prevent damage. -
Q: How should I clean the sunlounger?
A: Clean the sunlounger with a damp cloth. Avoid using harsh chemicals that may damage the material. -
Q: What is the warranty period for this product?
A: Please refer to the warranty information provided by the manufacturer for details on the warranty period.
Read these instructions carefully before use and assembly and keep for future
reference!
Assembly dimensions ca. 178 x 64 x 78 cm
IMPORTANT NOTES!
- Does this product meet your expectations? Is the packaging undamaged?
- Before assembly of the product please check if the kit is complete and accurate on basis of the spare part list. Defects or missing parts have to be notified before assembling the product. The manufacturer cannot be held responsible for damages caused during assembly of the product, for example scratches or dents.
Spare part list
Information
CAUTION SCISSOR ACTION! RISK OF INJURY BY CRUSHING! NEVER LEAVE CHILDREN
UNATTENDED! KEEP OUT OF REACH OF CHILDREN!
Assembly instruction
Please enter and use carefully!
Max. Load Capacity (1 Person) 110 KG
- Clean with a damp cloth, keep protected when not in use.
- This product is only for the private sector. Any commercial use is prohibited! No use as sports or fitness equipment! Caution by use on soft lawns. Only use on even floors and grounds.
- The sunlounger is a piece of garden furniture and not play equipment for children!
Important Notes!
All screws, fasteners, fittings, etc. must be checked regularly.
INFORMATION
Read all instructions before assembly and using this product!
- Select ideal location for assembling. Set out all parts on a clear and level surface prior to assembly. Ideally, the product should be set up in the desired location to avoid moving it after assembly.
- Use caution. During all the process of assembling, especially when lifting heavy or large parts, pay attention to safety. No one other than those assistants should be allowed in the work area.
- Check all parts available. Before assembling your product, make sure that you have all parts described in the Parts List.
- Keep children away. Children shouldn’t be allowed in the work area. Do not let them handle parts and tools. Do not allow children to climb on when it is in use.
- It is also recommended to store and secure the products during inclement or stormy weather or remove them completely.
- If after some time using small rust spots occur on your product, that mostly only will be surface rust on parts of steel tubes. This rust can be quickly and easily removed and covered by using some usual paint.
- Carefully remove all packaging material and dispose of it according to type. Should you wish to dispose the product after a long period of use, please observe the local regulations regarding the disposal of the different materials of the product.
Manufactured for :
LECO-Werke Lechtreck GmbH & Co. KG – Hollefeldstrasse 41 – 48282 Emsdetten –
Germany
Synthetic fabric / Textile
30% Polyester / 70% Polyvinyl chloride (PVC)
- hand wash
- Do not bleach!
- Do not tumble dry!
- Do not iron!
- Do not dry clean!
LECO-Werke Lechtreck GmbH & Co. KG – Hollefeldstrasse 41 – 48282 Emsdetten –
Germany
Read assembly manual carefully!