LECO 4721010999 4 Pcs. Plastic Sheet Base Set Instruction Manual
- June 4, 2024
- LECO
Table of Contents
LECO 4721010999 4 Pcs. Plastic Sheet Base Set
4pcs. Plastic Sheet Base Set
Read these instructions carefully before use and assembly and keep for future
reference!
Important Notes!
Does this product meet your expectations? Is the packaging undamaged?
Before assembly of the product please check if the kit is complete and
accurate on basis of the spare part list. Defects or missing parts have to be
notified before assembling the product. The manufacturer cannot be held
responsible for damages caused during assembly of the product, for example
scratches or dents.
Spare Part List
CAUTION SCISSOR ACTION! RISK OF INJURY BY CRUSHING! NEVER LEAVE CHILDREN UNATTENDED! KEEP OUT OF REACH OF CHILDREN!
Assembly Instruction
Please fill completely with wate, fine sand, fine pebbles, etc.! Never use
without filling.
If water is used, it should be removed in the autumn and winter months to
avoid frost damage.
Clean with a damp cloth, keep protected when not in use. This product is only
for the private sector. Any commercial use is prohibited! No use as sports or
fitness equipment!
Important Notes!
All screws, fasteners, fittings, etc. must be checked regularly.
Caution scissor action! Risk of injury by crushing! Never leave children unattended! Keep out of reach of children! Clean with a damp cloth, keep protected when not in use. This product is only for the private sector. Any commercial use is prohibited ! No use as sports or fitness equipment! Please check the entire stability at regular intervals. Please fill completely with water, fine sand, fine pebbles, etc.! Never use without filling. If water is used, it should be removed in the autumn and winter months to avoid frost damage
Read all instructions before assembly and using this product!
- Select ideal location for assembling. Set out all parts on a clear and level surface prior to assembly. Ideally, the product should be set up in the desired location to avoid moving it after assembly.
- Use caution. During all the process of assembling, especially when lifting heavy or large parts, pay attention to safety. No one other than those assistants should be allowed in the work area.
- Check all parts available. Before assembling your product, make sue that you have all parts described in the Parts List.
- Keep children away. Children shouldn’t be allowed in the work area. Do not let them handle parts and tools. Do not allow children to climb on when it is in use.
- It is also recommended to store and secure the products during inclement or stormy weather or remove them completely.
- If after some time using small rust spots occur on your product, that mostly only will be surface rust on parts of steel tubes. This rust can be quickly and easily removed and covered by using some usual paint.
- Carefully remove all packaging material and dispose of it according to type. Should you wish to dispose the product after a long period of use, please observe the local regulations regarding the disposal of the different materials of the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>