LOTUS 50017/1 Outdoor Sports Watch User Manual
- June 6, 2024
- LOTUS
Table of Contents
LOTUS 50017/1 Outdoor Sports Watch
This product should not be worn when showering or used in a sauna/steam room as it is not possible to prevent steam entering the watch. Any water damage to the product due to non-compliance to this instruction will not be covered by the warranty.
Functions introduction
Buttons
Press the button to return to the Dial interface from the Function interface; press the button to turn on / turn off the screen when on the Dial interface. Long press the button to power on/power off the smartwatch.
Charging Guide
Magnetic charging is as shown below. This watch supports a PC USB or 5V
charger. It takes about 2 hours to fully charge the battery.
Simultaneous contact of the two pins of the USB cable and the conductor may cause a short circuit and may cause burning.
Shortcut function introduction:
- Swipe from right to left on the dial interface to enter the Data menu, which shows steps, distance, calories. Swipe left again to enter into the heart rate testing. Swipe left again to enter the Sleep Monitoring function.
- Swipe down to view certain shortcut functions and settings.
- Swipe from left to right for your daily notification history. Follow the instruction to set up the Bluetooth connection between the watch and the mobile phone in order to receive mobile phone notifications.
- Swipe up to enter into the Menu interface: here you swipe up and down to select any functions. Tap to enter.
- Long press on the DIAL interface to select the DIAL, swipe left or right to select and tap to confirm.\
Notification
Connect the watch to the Lotus application (hereafter APP) and once in the
APP ensure that the necessary mobile phone permissions have enabled. The
device can synchronize the last 10 notifications from the mobile phone.
Down slide menu (Slide down the DIAL interface to enter into this menu)
- Date, Bluetooth connect status, power, time.
- QR code for APP (i).
- Connect /disconnect the Audio Bluetooth.
- Stopwatch.
- Brightness adjustment.
- Settings.
Telephone / Call records
Connect the watch “Audio BT” with your mobile.
Click the “Telephone” icon to turn on/off the Bluetooth calling. When the Audio Bluetooth is turned on, it will be displayed in the mobile BT menu. After the Bluetooth connection is made you can use the watch to answer/hang up the phone. Connect and disconnect the Audio BT by swiping down from the watch face and press the “telephone” icon. When connected the symbol is blue.
Call records
This function saves the records of connected & dialed calls. Records will be
automatically overwritten when the 128 maximum records are reached. Click any
call record to call back.
Dial pad
Use the dial pad to enter a phone number manually.
Messages
Connect the watch with APP and enable the SMS permissions on the mobile phone
APP. The respective corresponding APP notifications pop-up on the watch when
there is activity on the chosen APPs.
Incoming call notification:
Activate “Incoming call” in the APP and the watch will display the number as
well as vibrate when there is an incoming call. You can dismiss the call on
the watch. If you have connected the watch Audio BT antenna you can also
answer the call on the watch.
Messages notification:
When receiving a message the watch vibrates and the display shows the
notifications from the mobile. This will be done for all notifications you
have given permission to in the APP/mobile.
Contact person
Connect the watch with the Lotus SmarTime application. Enter the APP – Device
– Frequent contacts – Add contacts. Choose from your contacts in your mobile
then synchronize the contacts to your watch (up to 20 contacts can be added to
Frequent contacts).
Data
The Health Data function can be activated by default, slide right to left on
the DIAL interface to enter into the Data interface. The Data interface shows
steps, distance and calories, which will be clear after 12PM every day.
Sports mode (Walking, Running, Cycling, Rope skipping, Badminton,
Basketball, Football)
Select and launch the corresponding sports mode by tapping on the
corresponding icon. Slide from right to left to pause and slide from left to
right to restart the sports mode. The sport training time can be saved once
over 1 minute has passed. Under 1 minute and the ”Too little data to be saved”
message will appear.
Heart rate
Fit the watch snug on your wrist; enter the heart rate interface and
measurement starts automatically. The data will appear after 10 seconds and
the measurement will take 10- 20 seconds to complete.
Blood pressure
Fit the watch snug to your wrist; enter the Blood pressure interface and
measurement starts automatically. The data will appear after 10 seconds and
the measurement will take 10- 20 seconds to complete.
Music
Please connect to the APP, turn on the music on your mobile phone and click to
enter the music interface & use the usual mobile phone music controls
(previous song, next song, start, pause function).
Sleep monitoring
Your sleep duration and quality will be recorded every day from 18.00pm to
10.00am the next morning to help you better adjust your work and rest time and
improve sleep quality. Consult your deep sleep, light sleep, and total sleep
duration readings. Please connect to the APP daily to sync your sleep data to
the APP, otherwise the information will be cleared automatically.
Stopwatch
Tap the icon to enter the stopwatch interface.
Find phone
Connect the watch with the APP, click “Find phone” and the phone will vibrate
or ring if it is activated. (Don’t turn off the vibration or ring on the phone
settings.)
Breathing
There are three breathing modes (Slow / Medium / Fast) available, select from
the 1 min / 2 min / 3 min options to train your breathing.
Massage
Tap the green button to start the massage and the watch starts vibrating, tap
the red button to stop.
Menu style
There are 2 menu style options: the rotating menu and list icon menu.
Settings
-
There are 6 languages available. The language of the watch is governed by the language the connected phone is set up for.
-
Slide right / left to select the watch DIAL or download DIAL via the APP.
-
Display lit time, there are 5 seconds / 10 seconds / 15 seconds / 20 seconds / 30 seconds for optional.
-
Vibration intensity: there are three vibration levels.
-
Factory reset, click “√” to reset the watch and click “X” to cancel the factory reset.There are 2 menu style options: the rotating menu and list icon menu.
-
There are 6 languages available. The language of the watch is governed by the language the connected phone is set up for.
-
Slide right / left to select the watch DIAL or download DIAL via the APP.
-
Display lit time, there are 5 seconds / 10 seconds / 15 seconds / 20 seconds / 30 seconds for optional.
-
Vibration intensity: there are three vibration levels.
-
Factory reset, click “√” to reset the watch and click “X” to cancel the factory reset.
Connect to the APP
Download and install the APP
Scan the following QR CODE to download and install the APP,
- Android: Google play search” LOTUS Smartime” and install the following APP
- iOS : Apple store search” LOTUS Smartime” and install the following APP
Pairing via Bluetooth
Disconnect Bluetooth status:
Bluetooth is activated and visible once the watch is powered on. Open the APP,
enter into the Device>>Connect device. The APP starts scanning for the device,
select “Lotus S8”. Enable the permissions as requested by the APP.
Connected APP status:
Time sync: The correct time will synchronize from the phone once connected.
Connect the Audio Bluetooth
Slide from up to down enter into the shortcut interface, click the icon to
open the Audio Bluetooth in the watch. Then go to the Bluetooth settings on
the phone, find the corresponding Bluetooth name to connect.
Find device
Connect the watch with the APP. Click “Find Watch” to find the device, the
screen of the watch will light up and vibrate.
Camera
Click “Take a photo” in the APP to activate the remote camera in the watch.
Click the button on the phone screen to take a photo. All photos will be saved
to the phone automatically.
Data synchronization
When connecting the watch with the APP data will synchronize to the APP
automatically.
Tilt to wake the screen
Put the watch on your wrist and turn on the “Tilt to wake” function in the
APP. The display will light up automatically when you tilt your wrist.
Do not disturb mode
In Device/ More you can find the Do not disturb mode. You can set the start
and end times. There are no incoming calls or notifications during this
period.
Alarm
Find this function in the APP>>Device>> more>>Alarm setting, set starting,
ending time, repeat times, repeating date, start alarm and close alarm.
Sedentary reminder
In Device/ More you can find the Sedentary reminder. Set start and end time,
days, reminder frequency and sedentary threshold. Switch on and off saved
reminder settings.
Drink water reminder
In Device/ More you find the Drink water reminder, set start and end time and
reminder frequency. Switch on and off saved reminder settings.
Watch face customization via the APP
Download the watch faces available in the APP
Connect to the APP and locate the function in the APP>>Device>>Watch Face,
select the desired watch face and click to confirm. Please wait while the
selected watch face is uploaded to the watch. The watch restarts when the
watch face is uploaded.
Customizing your Watch Face
Connect to the APP, locate the function in the APP>>Device>>Watch Face>>Watch
face with Camera Icon. Select the Camera Icon watch face and tap the watch
face. Take a photo or Select from your album. Press “Start Upload”. The watch
restarts when the watch face is uploaded.
Firmware version
Indicates the version of the software of the watch and update with the latest
firmware version.
Disconnect
Disconnect the watch by clicking the “Disconnect watch” button in the APP. And
forget the device if using iOS system.
FAQ
Please avoid prolonged exposure of this device to extreme temperatures as it may cause permanent damage.
Why can’t I wear the watch to take a hot shower?
When the water temperature changes rapidly, water vapor or condensation is
created. The water vapor is in the gas phase and the size of the molecular so
minute so it can easily enter the watch. The internal circuit of the watch can
then short-circuit, which may damage the circuit board of the watch and affect
the functioning of the watch.
Why wont the watch turn on? Why won’t it charge?
If when you receive the watch and it does not power up immediately, it may be
that a collision during the transport of the watch has affected the battery.
Plug in the charging cable for activation. If the battery level is too low, or
if the watch has not been used for a long time and will not turn on, please
plug in the charging cable and charge it for more than half hour to activate
it.
Disclaimer
The method of capturing the heart rate through an optical sensor used by this LOTUS watch does not reach the level of precision and accuracy of a professional medical device, nor can it guarantee the equivalent stable readings. The watch cannot replace a medical device in its function of detecting or diagnosing pathologies, heart or other diseases. Consequently and with respect to this function, the device is for recreational use only. Multiple factors (including level of skin contact, pigmentation, tattoos, sudden arm movements etc) can alter the accuracy of the data provided by the sensor. Please keep in mind that the actual heart rate may be higher or lower than the reading indicated by the optical sensor at a given time.
If you suspect any anomaly, always consult your doctor and in case of emergency, immediately contact the emergency services in your area. Festina Lotus SA assumes no responsibility for any claim that may arise from the use and/or interpretation that the user of the device and/or third parties may make of the heart rate information provided by their devices.
By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch- making products must be selectively collected for processing. You may therefore dispose of your quartz watch-making products at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating and recycling of these products help contribute to safeguarding the environment and protecting our health.