ZEBRONICS ZEB AIO360 AIP Cooler User Manual

: June 16, 2024
: ZEBRONICS

Table of Contents

Thank you!
Feature
Packaging Contents
Installation instructions
For AMD SETUP
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZEBRONICS ZEB AIO360 AIP Cooler User

Thank you!

thank you for purchasing ZEB-AI0360AW / ZEB-AL0360AB ALO Cooler.
Please read this user manual carefully and Keep it for future reference.

Note

Avoid the usage of this product at the high temperature and high humidity environment.
Avoid the self-disassembly of the products or it results in the voiding the product’s Warranty.
Please clean off the existing thermal compound which is present on the CPU and install the Included thermal compound for obtaining the best Cooling efficiency.
To know more about Terms and conditions for warranty policy, please visit https://zebronics.com/pages/warranty-policy

Feature

360mm AIO cooler
ARGB sync
67.96 CFM Fans
Supported Intel processors:- LGA 117SX/1200/1366/17XX/20ll/2066
Supported AMO processors: FM3/ FM2/FM1/AM2/AM2+/AM3/AM3+/AM4 /AMS
ARGB Sync
ARGBCPU Block
3xl20mm Fans

Specifications

Form factor of the

AIO cooler : 360mm

CPU Socket

Supported CPU models

Intel : LGA115X / 1200 / 1366 / 1700 / 2011 / 2066
AMO : FM3/ FM2/ FM1 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5

Fan Specs

No. of Cooling Fans

Included : 3 x 120mm Fans
Noise level of the fan : 15-35db
Power Consumption of the Fan : 2.16W
Rated Watts : 2.16W
MTBF of the FAN : 30000 hours
Speed of the Fan : 1800RPM (max)
Fan Dimensions : 12xl2x2.5 cm (WxDxH)
Type of Fan Connector Used : 4 Pin Fan Connector
RGB / ARGB Sync Support : ARGB Support
Fan power connector and connector length : 4-Pin power
Connector; Female – 49cm I Male – 56cm
Fan LED connector and connector length : 3-Pin ARGB connector; Female -53.Scm / Male – 74.5cm

Pump Specs

Speed of the Pump : 2500RPM±l0% Rated Voltage of the
Pump : 12V
Rated Current of the Pump : 0.3A
Power Consumption of the Pump : 3.6W
Type of Connector Used : 3 Pin connector
MTBF of the Pump : 30000 Hours
Tube Length of the AIO Cooler : 38cm

Type of Pipes Used

Diameter of the : Braided Rubber Pipe
Pipe : 1.12cm
Noise Level of the Pump :30db
CPU Block power connector and connector length : 3-Pin Power Connector; Length – 32cm
CPU Block LED connector and connector length : 3-Pin ARGB connector; 48cm- Female I 58cm-Male

Radiator Specs

Material of the Heat Sink : Aluminium
Material of the Heat transfer Pipe : Copper
Dimension of the Radiator : 40 x 12 x 3cm
Dimensions of the CPU Block : 9 x 7.5 x 5.2cm

General Specs

Product Weight : 1.47kg

Packaging Contents

CPU Cooler
Intel Backplate
intel bracket
AMD Bracket
Thermal paste with spreader
4x Mounting Nuts
- 4x AMD Bracket Screws
- 4 x Intel Screw Studs
- 4x Intel bracket screws (LGA2011)
- Radiator Mounting screw set
- Fan Controller

Installation instructions

For Intel Setup: –

Step1 :- Take the included Intel Mounting Bracket(() and align with the Latching mechanism of the CPU Block.
Step2:- Slide the Intel mounting bracket (c) into the mounting Slot of the CPU block until the Intel mounting bracket cannot be moved any further(as shown in the reference image) .

Applying the thermal paste:-

Step1:- Remove the existing Thermal compound which is present on the CPU
Step2:- Apply the included thermal paste on the CPU as per your CPU requirement
Step3:- Using the include Thermal paste spreader, Spread the applied thermal paste evenly on the surface of the CPU.
Step4:- Wipe of the excess Thermal compound which is present on the CPU.
Now peel of the protective cover which is present under the conductive plate of the CPU Block.

MOUNTING THE CPU BLOCK:-

For LGA 1700 / LGA 1200 /LGA115X models:-

Step1:- Take the included Intel Mounting Backplate(B), Adjust the mounting points according to your motherboard layout. Now align it to the rear side of the motherboard.
Step2:- Align the mounting studs(G3) to the motherboard as shown in the reference image. Fasten the Mounting studs to the Mounting bracket which is placed on the rear side of the motherboard.
Step3:- Align the CPU block to the mounting studs(G3) (as shown in the reference image).
Step4:-Align the mounting Nuts(G1) to the CPU block (as shown in the reference image).
Step5:- Using the required tools. Fasten the Mounting nuts(G1) along with the CPU block to the mounting Studs(G3) which is placed on the motherboard.

For LGA2011 model :-

Step1:- Take the included Intel Mounting Backplate(B), adjust the mounting points according to your motherboard layout. Now align it to the rear side of the motherboard.
Step2:- Align the CPU block to the motherboard (as shown in the reference image).
Step3:- Align the mounting Screws(G4) to the CPU block (as shown in the reference image).
Step4:- Using the required tools. Fasten the Mounting screws(G4) along with the CPU block to the mounting bracket(B) which is placed on the rear side of the motherboard.

Connection of AIO Cooler

Step1:- Combine the 4- pin fan connector of the AIO cooler together and Plug the combined 4 – pin Fan connector to the System fan header of the motherboard.
Step2:- Combine the 3 – pin ARGB fan connector and 3 – pin ARGB CPU Block connector. Now plug the Combined ARGB connector to the 3 – pin connector to the ARGB header of the Motherboard.
Step:3:- Connect the Power connector CPU Block connector to the CPU Fan Header which is present on the motherboard. Alternatively you can connect a fan controller to the connection setup which is provided in the package contents of the A/0 cooler. Please follow the below connection diagram to fully utilize the fan controller.

Mounting the AIO Cooler setup.

Step1:- Align the Radiator block of the AIO cooler to the mounting points of the Gaming cabinet.
Step2:- Place the mounting screws on the mounting points of the AIO cooler.
Step3:- by using the required tools, Fasten the mounting screws to the AIO cooler via the cabinet. Ensure to apply pressure evenly for optima I placement

For AMD SETUP

Assembling the CPU BLOCK:-

Step1:- Take the included Intel Mounting Bracket(C) and align with the Latching mechanism of the CPU Block.
Step2:- Slide the Intel mounting bracket (c) into the mounting Slot of the CPU block until the Intel mounting bracket cannot be moved any further(as shown in the reference image) .

Combining the CPU Mounting brackets:-

Step1:- Align the AMO mounting brackets (D) To the CPU mounting points of Step2:-Align the AMD mounting screws(G2). To the mounting points of the motherboard.
Step2:- Align the AMD mounting screws(G2). To the mounting points of the motherboard.
Step3:- Using the required tools, Fasten the AMD mounting screws into the mounting points of the motherboard via the AMD mounting plate (as shown in the Reference image).

Applying the thermal paste:-

Step1:-Remove the existing Thermal compound which is present on the CPU
Step2:- Apply the included thermal paste on the CPU as per your CPU requirement.
Step3:- Using the include Thermal paste spreader, Spread the applied thermal paste evenly on the surface of the CPU.
Step4:- Wipe of the excess Thermal compound which is present on the CPU. Now peel of the protective cover which is present under the conductive plate of the CPU Block

Mounting CPU Block:-

Step1:- Align the intel screw stud to the mounting points of the AMO Mounting Bracket and fasten the mounting stud to the mounting points of the AMO bracket.
Step2:-Align the CPU block to the Intel screw studs. Now place the CPU block on the CPU via the mounting studs.
Step3:- Now align the Intel mounting Nuts to the Intel screw Stud and Fasten them with even pressure until the CPU block is intact

Mounting the AIO Cooler setup .

Step1:- Align the Radiator block of the AIO cooler to the mounting points of the Gaming cabinet.
Step2:- Place the mounting screws on the mounting points of the AIO cooler.
Step3:- by using the required tools, Fasten the mounting screws to the AIO cooler via the cabinet. Ensure to apply pressure evenly for optimal placement

Note:- Please use a compatible gaming cabinet to mount the AIO cooler.

Customer Support

We suggest you to visit our Below link to buy the optimal Gaming chassis for your AIO Cooler.
https://zebronics.com/collections/premium-gaming-chassis
ISO 9001:2015 Certified Company
www.zebronics.com