eurowise 02A Manual Cable Conversion Kit Installation Guide
- May 15, 2024
- eurowise
Table of Contents
eurowise 02A Manual Cable Conversion Kit
Specifications
- Manufacturer: Eurowise
- Model: 02A Manual Cable Conversion Kit
- Contents:
1. Eurovan Manual Clutch Actuator
2. Modified Clutch Cable
3. Clutch Cable Bracket
Kit Contents
- Eurovan Manual Clutch Actuator
- Modified Clutch Cable
- Clutch Cable Bracket
INSTALLATION
Install Clutch Actuator
- Re-use your factory bolts when installing the clutch actuator.
- You will need an extension to tighten the right side bolt.
Step 2:
Install Clutch Cable Bracket
If your using a 02J transmission the reverse switch will be in the way of the bracket. The reverse switch will either need to be deleted or modified for proper fitment. The reverse switch will need to be trimmed. This does NOT apply to 02A.
Step 3: Clutch Cable
Slide the clutch cable into the bracket, and pull the rubber sleeve back.
Slide the cable through the tube and attach to the clutch pedal
IF YOU HAVE ANY QUESTIONS, COMMENTS, OR CONCERNS RELATED TO YOUR PRODUCT PLEASE CONTACT US!
QR SCAN
FAQ
Frequently Asked Questions
- Q: What should I do if I have questions or concerns about the product?
- A: If you have any questions, comments, or concerns related to your product, please contact Eurowise at the following address:
CONTACT
- ADDRESS: 440 Springbrook Road, Charlotte, NC 28217
- Phone: 704-559-8100
- Email: info@eurowise.com
- Website: www.eurowise.com
- Online Shop: shop.eurowise.com
References
- Specializing in European Service, Performance and Fabrication – Eurowise Performance
- Eurowise Audi, BMW, Volkswagen, Mercedes, & Porsche Service
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>