BIGBOI SUCK R MINI Wet and Dry Vacuum Cleaner Instruction Manual

BIGBOI SUCK MINI
INSTRUCTION MANUAL
WET & DRY
VACUUM CLEANER

SUCK R MINI Wet and Dry Vacuum Cleaner

WARNING
THIS PRODUCT CONTAINS OR USES A BUTTON CELL BATTERY

| If swallowed. a lithium button battery can cause severe or fatal injuries’ within 2 hours.
---|---
| Keep batteries out of reach of children
****| If you think battens may have been swallowed or placed inside any part of the body, seek immediate medical attention

Please read the operating instructions carefully before use.

WARRANTY INFORMATION

BIGBOI OFFERS A 2-YEAR LIMITED WARRANTY INTENDED FOR NON-COMMERCIAL USE

PROOF OF PURCHASE
Please keep your dated proof of purchase for warranty and servicing purposes.
REPLACEMENT PARTS
Replacement parts for this product are available at www.ibigboi.com.
Please use the part numbers listed in this manual for all part orders where applicable.

LIMITED TOOL WARRANTY
BIGBOI makes every effort to ensure that this product meets high quality and durability standards. BIGBOI warrants customers a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from defects in materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, normal wear and tear, negligence or accidents, repairs done by an unauthorized service Centre, alterations, or lack of maintenance.
To take advantage of this limited warranty, return the product at your expense together with your dated proof of purchase to BIGBOI or any authorized resellers in your region.. Contact our customer service for corresponding help. BIGBOI will either repair or replace the product if any part or parts covered under this warranty which examination proves to be defective in workmanship or material during the warranty period.

NOTE TO USER
This instruction manual is meant to serve as a guide only. Specifications and references are subject to change without prior notice.

BIGBOI INTERNATIONAL PTY LTD
UNIT 33/172 Milperra road Revesby NSW 2122 Sydney Australia.

GENERAL & SPECIFIC SAFETY RULES

Safety is a combination of common sense, staying alert and knowing how your SUCKR MINI works. Read and understand the following safety rules before operating. Learn its application and limitations as well as its specific potential hazards.

1. REMOVE ADJUSTING KEYS AND WRENCHES.
   Form a habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.

2. KEEP WORK AREA CLEAN.
   Cluttered areas and benches invite accidents. Ensure the floor is clean, clutter free and not slippery.

3. AVOID DANGEROUS ENVIRONMENTS.
   Do not use the unit in damp or wet locations or expose it to rain. Keep work area well-lit and provide adequate surrounding work space.. Do not handle the electrical plug or unit with wet hands. Never vacuum anything that is on fire, burning or smoking such as matches, cigarettes or hot ashes. Never vacuum flammable or combustible liquids such as gasoline or electrical devices which could produce sparks and cause a fire or explosion! Never vacuum toxic or hazardous materials. When wet vacuuming, operate the unit only when the container is level, otherwise there is a risk of electric shock

4. KEEK AWAY FROM CHILDREN.
   All children should be kept a safe distance from work area.

5. USE CORRECT SPEED.
   The unit best performs when operated at the correct speed.

6. USE FOR THE RIGHT PURPOSE
   Do not force the unit or the attachments to do a job for which it was not designed.

7. WEAR APPROPRIATE CLOTHING.
   Where appropriate, wear a dust mask, hearing protectors, gloves and workshop apron capable of stopping small abrasive or workpiece fragments Do not wear loose clothing, gloves, neckties or jewelry t o avoid risk of getting caught in moving parts. Non slip footwear is recommended. Wear protective
   hair covering to contain long hair. Roll up long sleeves above the elbows.

8. ALWAYS WEAR SAFETY GLASSES.
   Always wear safety glasses . Everyday eye-glasses only have impact resistant lenses, they are NOT safety glasses.. The safety glasses must be capable of protecting against flying particles generated by the various operations.

9. DON’T OVERREACH.
   Keep proper footing and balance at all times.

10. AVOID ACCIDENTAL STARTING.
    Make sure the switch is in the “OFF” position before plugging in.

11. USE RECOMMENDED ACCESSORIES.
    Consult the manual for recommended accessories. Follow the instructions that accompany the accessories. The use of improper accessories may cause hazards.

12. NEVER STAND ON THE UNIT.
    Serious injury could occur if the unit tips over. Do not place materials on top of the unit to stand on.

13. CHECK DAMAGED PARTS.
    Before further use of the SUCKR MINI, a guard or other parts that are damaged, should be carefully checked to ensure that they will operate properly and perform their intended function. Check for alignment of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other parts that are damaged should be properly repaired or replaced.

14. NEVER LEAVE MACHINE RUNNING UNATTENDED.
    Turn power “OFF”. Don’t leave any tool running until it comes to a complete stop.

15. TORING THE SUCKR PRO
    This unit must be stored indoors. -5°C to +40°C

16. Never use this vacuum without dust bag and/or filters installed. The replacement HEPA and High Efficiency filters and accessories are available and are listed in the parts list.

17. Never use this vacuum with any opening blocked, keep opening free of dust, hair, lint or anything that will restrict air flow.

18. Only use undamaged power cords and regularly check condition of extension cords.

SPECIFIC SAFETY RULES

1. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
2. Children being supervised not to play with the appliance.
3. That the plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

CONDITIONAL MARKS

| General warning sign
Risk to people, explained by additional sign or text.
---|---
| See the instructions on safety and operation techniques/brochure
| Wear hearing protection
| Wear eye protection
| Wear a mask
| Risk of electric shock !
| Alternating current
| Degree of protection against dust and water
| Special disposal to prevent possible damage to the environment, it is necessary to separate this object from ordinary waste and dispose of it in the safest way）

GETTING TO KNOW YOUR SUCKR MINI

1. Sofa brush
2. Vacuum cleaner tank
3. Lock catch
4. Air outlet plate
5. Extension plastic tube
6. Hose connector
7. Cover
8. Handle
9. Operation mode switch
10. Hose| 11.Set of transport wheels
12.Remote
13.Crevice tool
14.Dust Bag
15.HEPA filter
16.Small round brush
17.Rotating floor brush
18.Flat flexible crevice tool
19. Tiny tube tool
20.8pcs micro kits
---|---

TECHNICAL DATE

The parameters are indicated for a nominal voltage of 220V 240V with a frequency of 50/60 Hz. At other values of voltage or frequency, other parameters are possible.

PREPARATION FOR WORK

Before preparing to use, during maintenance and after use of the SUCKR MINI, Unplug the plug from the socket.

Unpack and remove the SUCKR MINI and accessories from the packaging. Inspect for external damage. If you have stored or transported the unit at a temperature lower than for the one in which it is planned to be used, it is necessary to make sure that there is no condensation in the SUCKR MINI. If condensation forms on the components and parts of the SUCKR MINI, its further preparation for work or operation is prohibited until the condensation dries completely.

Pic-3

Assembling the SUCKR MINI
Release the lock（1）of the SUCKR MINI to remove the cover（2），pull out the transport wheels and accessories（Pic.3）

Install the four transport wheels（1）(Pic.4)

Pic.4

Connect the extension tube （ 1 ）into one rod（Pic.6).
Install the hose（ 3 ） into the connector of the SUCKR MINI（ 4 ).
Connect the hose connector（2）to the rod. Install the sofa brush or narrow nozzle to your cleaning tool（Pic.6).

Pic.6

For hard-to-reach areas, use the crevice tool (3)(Pic.5)
Do not use the SUCKR MINI to suck up large pieces of garbage or household waste. This can lead to clogging of the rod, flexible hose, or clogging of the nozzle.

Installing the filter
Pull out the eccentric latches （ 2 ） from the SUCKR MINI cover body. Install the cassette filter （ 1 ） and fix it with eccentric clamps (Pic.7). Depending on the operating conditions, install a paper filter bag in the SUCKR MINI.
Installation of a replaceable filter dust bag (Pic.8）
– Install the replaceable filter bag（1) on the seat（3）. The rubber seal（2) must fully enter the corresponding groove.
– Pull the filter bag in the opposite direction to the installation to check the fit.

WORKING WITH THE SUCKR MINI

The SUCKR MINI is recommended to work at an ambient temperature of +5°C to +40°C.

VACUUM FUNCTION (WET &DRY)

1. Insert the plug into the outlet. Turn the switch to position “I” to turn on the SUCKR MINI automatically . And the remote also controls the SUCKR MINI on/off. (Pic .9)

2. Press the on/off button (A) on the remote, choose between speed 3settings low, medium & high (pic 10)
   ▲ High Power +
   ▼ Low Power –

3. To stop the machine, press the on/off switch ’O’ position.

4. Remote Control –Code matching : when the remote not works or use another new remote, code matching is required
   ① Turn the switch to position ‘I’ （Pic 9）
   ② Press the setting button(S) twice （Pic 11）,press on/off(A) on the remote ( Pic 10 )
   ③ The SUCKR MINI stops working when matching. Then after 10 seconds, the remote works
   Note： SUCKR MINI already matched its own remote, can work directly when receive)

Note: The dust bag is suitable only for dry vacuum-cleaning ONLY!

Note: Large objects can get caught in the brush, which can cause it to overheat. Be sure to pick up large objects that may cause blockages before cleaning.
Never use solvents or other aggressive chemicals to clean non-metallic parts of the SUCKR MINI.
These chemicals can degrade the properties of the materials used in these parts. Do not allow any liquid to get inside the SUCKR MINI.

SERVICE

Wear a mask
Regularly (preferably after each use) wipe the body of the unit and accessories with a soft cloth or blow with compressed air.
After dry cleaning:
– Open the lock of the unit.
– Clean the unit(Pic.15).
– When using a paper bag, remove it, dispose of it and install a new bag.

After wet cleaning:
– Remove the upper part of the vacuum cleaner, pour out the collected liquid, shake or blow the inside of the tank, wash the filter and collect the vacuum cleaner.
– Do not bend the cassette filter or clean with coarse brushes.

Filter maintenance

It is strictly forbidden to operate the unit without an installed filter.
Filters are installed on the base located in the lower part of the electric motor section. If the filter breaks, you should immediately turn off the unit and replace the filter with a new one. Regular cleaning contributes to the longterm maintenance of maximum suction power.

Remove the cassette filter from the top cover of the vacuum cleaner, rinse with water and dry(Pic.16).
To prevent mold formation, remove the filter after use and dry it well, especially before dry vacuuming usage.
The warranty does not cover consumables that wear out.
Replaceable components such as HEPA filters, textile and paper bags, etc., must be replaced as they wear out.

CAUTION:
The SUCKRMINI features thermal overload protection to safeguard the motor from extreme temperatures. If it suddenly stops working, please turn the unit off and unplug from the outlet. Check to ensure the HEPA filter and hose are not blocked with debris. If clean from debris, restart the unit once it has cooled down. If debris is present, please clean and/or change HEPA filter

STORAGE AND TRANSPORTATION

It is recommended to store the SUCKR MINI in a dry place inaccessible to children, at a temperature from -5°C to +40°C, with a relative humidity of no more than 80%. If you have stored or transported the u n i t at a temperature lower than that, at which you plan to use it, you must ensure that there is no condensation on the unit. If condensation forms on the components and parts of the unit, its further preparation for work or operation is prohibited until the condensation dries completely.
For storage and transportation, use the original or other packaging to avoid damage to the unit and its accessories during transportation.
The unit can be transported by all types of transport, in accordance with the general rules of transportation. During loading and unloading operations and transportation, the unit should not be exposed to shocks and atmospheric precipitation.
Placement and fastening of the unit in vehicles must ensure a stable position and the absence of the possibility of its movement during transportation.

DISPOSAL

Do not throw away the SUCKR MINI together with household waste.
Units that have been removed from operation are subjectto separate storage and disposal in accordance with environmental protection legislation.

POSSIBLE FAULTS AND METHODS OF THEIR ELIMINATION

sure that the ventilation holes are not dosed during operation.
Contamination of the filter element| Clean the filter element.
Mismatch of network parameters| Make sure that the electrical network has a voltage of 220240V and a current frequency of 50 Hz.. ln case of discrepancy. usea voltage stabilizer.
Weakening of suction power| The bag is full| Replace the bag. Make sure that the new bag is correctly installed and straightened.
Clogging in the hose/nozzle| Turn off the vacuum cleaner. Mechanically dean the hose/nozzle. Do not suck up large pieces of garbage and or household waste.
Contamination of the filter| Mechanically clean the filter by shaking it or blowing it with compressed air.

PARTS DIAGRAM MODEL SUCKR MINI

PARTS LIST MODEL SUCKR MINI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>