VOLLRATH T39767 Affordable Portable Hot Food Station Deluxe Instruction Manual

: June 1, 2024
: VOLLRATH

Table of Contents

VOLLRATH T39767 Affordable Portable Hot Food Station Deluxe
Product Information
Product Usage Instructions
FAQs
SAFETY PRECAUTIONS
FUNCTION AND PURPOSE
POSITIONING AND CLEARANCE
FEATURES AND CONTROLS
OPERATION
CLEANING
TROUBLESHOOTING
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VOLLRATH T39767 Affordable Portable Hot Food Station Deluxe

VOLLRATH-T39767-Affordable-Portable-Hot-Food-Station-Deluxe-
PRODUCT

Product Information

Specifications
- Model: Affordable Portable Hot Food Station Deluxe
- Available Finishes: Walnut, Cherry, Black Woodgrain, Granite White, American Natural, Brushed Aluminum
- Features: Solid Base, Open Storage Base, Storage Base with Door

Product Usage Instructions

Safety Precautions
- To ensure safe operation, read and understand the following safety precautions:
- Warning: Indicates hazards that can cause severe personal injury or death.
- Caution: Indicates hazards that can cause minor or major personal injury if ignored.
- Notice: Provides important information that is not hazard-related.
Features and Controls
- The hot food station includes the following features and controls:
- ON/OFF Switch: Illuminates in the ON position.
- Water Level Marks: Indicates the correct water level.
- Heat Control Dial: Used to set or adjust the heat of the well.
- Low Water Light Indicator: Illuminates when water level is low.
- Drain Valve: Used to empty water from the wells.
- Access Door: Open or remove to access the drain valve.
Function and Purpose
- The equipment is designed to keep hot food at proper serving temperatures and is intended for commercial food service operations.
- It is not meant for cooking raw food or reheating prepared food.
- Ensure that food is prepared and placed in the station at proper serving temperatures.
- Do not use the hot food station for household, industrial, or laboratory purposes.
Positioning and Clearance
- Ensure the hot food station is positioned in a suitable location with proper clearance to allow for safe operation and maintenance.

FAQs

Q: Can I use the hot food station to cook raw food?
- A: No, the hot food station is not designed for cooking raw food. It is intended for keeping hot food at proper serving temperatures only.
Q: What should I do if the low water light indicator comes on?
- A: If the low water light indicator illuminates, refill the water to the appropriate level to ensure the safe operation of the equipment.

Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Description| Black| Walnut Woodgrain| Cherry Woodgrain| Granite| White| American Natural| Brushed Aluminum
---|---|---|---|---|---|---|---
3 Well NSF2 Buffet Breath Guard Deluxe Hot Food Station – 120V
Solid Base| T38707| T38935| T38767| T38727| T38727W| T38727N| T38727A
Solid Base w/Lights| T3870746| T3893546| T3876746| T3872746| T3872746W| T3872746N| T3872746A
Open Storage Base| T38708| T38936| T38768| T38728| T38728W| T38728N| T38728A
Open Storage w/ Lights| T3870846| T3893646| T3876846| T3872846| T3872846W| T3872846N| T3872846A
Storage Base w/ Door| T38709| T38937| T38769| T38729| T38729W| T38729N| T38729A
Storage w/Door, w/Lights| T3870946| T3893746| T3876946| T3872946| T3872946W| T3872946N| T3872946A
3 Well NSF2 Cafeteria Breath Guard Deluxe Hot Food Station – 120V
Solid Base| T39707| T39935| T39767| T39727| T39727W| T39727N| T39727A
Open Storage Base| T39708| T39936| T39768| T39728| T39728W| T39728N| T39728A
Storage Base w/ Door| T39709| T39937| T39769| T39729| T39729W| T39729N| T39729A
4 Well NSF2 Buffet Breath Guard Deluxe Hot Foot Station – 120V
Solid Base| T38710| T38945| T38770| T38730| T38730W| T38730N| T38730A
Solid Base w/ Lights| T3871060| T3894560| T3877060| T3873060| T3873060W| T3873060N| T3873060A
Open Storage Base| T38711| T38946| T38771| T38731| T38731W| T38731N| T38731A
Open Storage w/ Lights| T3871160| T3894660| T3877160| T3873160| T3873160W| T3873160N| T3873160A
Storage Base w/ Door| T38712| T38947| T38772| T38732| T38732W| T38732N| T38732A
Storage w/ Door, w/ Lights| T3871260| T3894760| T3877260| T3873260| T3873260W| T3873260N| T3873260A
4 Well NSF2 Cafeteria Breath Guard Deluxe Hot Foot Station – 120V
Solid Base| T39710| T39945| T39770| T39730| T39730W| T39730N| T39730A
Open Storage Base| T39711| T39948| T39771| T39731| T39731W| T39731N| T39731A
Storage Base w/ Door| T39712| T39947| T39772| T39732| T39732W| T39732N| T39732A

SAFETY PRECAUTIONS

To ensure safe operation, read the following statements and understand their meaning. This manual contains safety precautions which are explained below. Please read carefully.

WARNING

Warning is used to indicate the presence of a hazard that will or can cause severe personal injury or death.

CAUTION

Caution is used to indicate the presence of a hazard that will or can cause minor or major personal injury if the caution is ignored.

NOTICE:

Notice is used to note information that is important but not hazard-related.
To reduce the risk of injury or damage to the equipment
Plug only into grounded electrical outlets that match the voltage rating on the nameplate.
Do not use an extension cord with this equipment. Do not plug this equipment into a power strip or multi-outlet power cord.
Equipment should only be used in a flat, level position.
Unplug the equipment and let it cool before cleaning or moving.
Do not spray controls with liquids or cleaning agents.
Unplug when not in use.
Keep equipment and power cords away from open flames, electric burners or excessive heat.
Do not operate unattended.
Closely supervise equipment operating in public areas and/or around children.
Do not use food pans deeper than 4” (10 cm).
Do not operate if equipment has been damaged or is malfunctioning.
Do not operate without water in the well.

FUNCTION AND PURPOSE

This equipment is intended to keep hot food at proper serving temperatures.
Hot food stations are intended for use in commercial food service operations.
Hot food stations are not intended or designed to cook raw food or to reheat prepared food.
Food must be prepared and placed in food stations at proper serving temperatures.
Hot food stations are not intended for household, industrial or laboratory use.

POSITIONING AND CLEARANCE

NOTICE: Do not move the equipment by pushing or pulling on the breath guard.
- This equipment is to be used on a flat, level surface.
- Controls and drains need to be accessible at all times of operation.

FEATURES AND CONTROLS

A ON/OFF switch. Illuminates in the “ON” position.
B Water Level Marks. Used to indicate the correct water level.
C Heat Control Dial. Used to set or adjust the heat of the well. The 0 position is OFF.
D Low Water Light Indicator. Illuminates when the water level is low.
E Drain Valve. Used to empty water from the wells.
F Access Door. Open or remove to access the drain valve.

OPERATION

NOTICE: Using a voltage other than the nameplate-rated voltage will cause damage to the unit. Incorrect voltage and modification to the power cord or electrical components can damage the unit and will void the warranty.
NOTICE: Drop-in meets NSF4 performance standards only when using moist heat. Operation with water is required for even heating of the food product.
NOTICE: Do not use food pans deeper than 4″ (10 cm).
- A Access Door. Open or remove to access the drain valve.
- B Drain Valve. Used to empty water from the well(s).

Open the access door and check that the drain valve is in the closed position.
Fill the well to the correct level marks with clean fresh water. Do not overfill.
Plug the electrical power cord into an outlet that matches the rated voltage on the nameplate.
Place the power switch in the On position. Turn the heat control to the highest setting.
Cover the wells with empty food containers or covers. Allow the water to preheat for 45 minutes.
Place containers of hot food, above 140 °F (60 °C), into the preheated well.
Reduce the heat setting to a level that will maintain a safe holding temperature and maintain food quality.
- NOTICE: Monitor food temperature closely for food safety. The United States Public Health Service recommends that hot food be held at a minimum of 140 ºF (60 ºC) to help prevent bacteria growth.
Maintain water level during operation. Periodically (approximately every 2 hours) remove the containers of food and check the water level. Add hot water if needed.
Use gloves, mitts or pot holders to protect hands when removing hot food containers.

CLEANING

To maintain the appearance and increase the service life, clean your equipment daily.
NOTICE: Do not use caustic cleaning chemicals, steel wool or commercial lime removal products to clean the equipment. Thoroughly rinse equipment with clean water after cleaning.

Turn the heat control to the 0 setting. Place the power switch in the OFF position.
Unplug the equipment.
Use gloves, mitts or pot holders to protect hands when removing hot food containers.
Allow the equipment to cool completely before cleaning.
Rotate the drain valve to the open position. Drain the water.
Use a damp cloth or sponge dipped in soapy water to clean the inside of the well and the outside of the equipment.
Thoroughly rinse equipment with clean water after cleaning.
Rotate the valve to the closed position.

Clean The Breath Guard

Always use a clean soft lint-free cloth or microfiber cloth.
Clean with a neutral cleaner such as a solution of warm water and a small amount of dish detergent or products specifically made for cleaning Plexiglas® and acrylic plastic.
Recommended cleaners for Plexiglas® and acrylic include: Novus®, #1Plexi-Clear, Brillianize®

What Not To Do

Do not use cleaners containing ammonia, alcohol, acetone or dry cleaning products. Cleaners with these chemicals will damage Plexiglas®, acrylic and other plastics.
Do not use paper towels, abrasive materials, scratching cleansers, razor blades, brushes, steel wool or scouring pads, such as Scotch Brite™ pads.
Do not use WD-40® or petroleum, industrial or commercial cleaning products.

Removing Minor Scratches

Fine scratches can be removed with a specialized mild abrasive polish such as Novus #2, or Novus #3.
Heavier scratches may require sanding and buffing.
Hand sand with a series of sandpapers with increasingly finer grits (250,400,600).
Then use a buffing wheel and buffing compound.

TROUBLESHOOTING

Problem| Might be Caused By| Course of Action
---|---|---
A switch does not illuminate when in the “ON” position.| The equipment is not plugged in.| Plug in the equipment.
Wells are not getting hot. Food is not staying hot.| Low or incorrect voltage to equipment.| Verify the source voltage matches the rated voltage on the nameplate on the equipment. If not, have a qualified electrical personnel install proper source voltage.
No water or incorrect water level.| Add water to the correct level.

WARRANTY STATEMENT FOR THE VOLLRATH CO. L.L.C.

This warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written warranty to purchasers for such uses.
The Vollrath Company LLC warrants the products it manufactures or distributes against defects in materials and workmanship as specifically described in our full warranty statement. In all cases, the warranty runs from the date of the end user’s original purchase date found on the receipt.
Any damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will not be covered under warranty.
For complete warranty information, product registration and new product announcement, visit www.vollrath.com.

SERVICE AND REPAIR

Serviceable parts are available on Vollrath.com.
To avoid serious injury or damage, never attempt to repair the unit or replace a damaged power cord yourself. Do not send units directly to
The Vollrath Company LLC. Please contact Vollrath Technical Services for instructions.
When contacting Vollrath Technical Services, please be ready with the item number, model number (if applicable), serial number, and proof of purchase showing the date the unit was purchased.