vivo V2310 Smartphone User Guide

May 15, 2024
Vivo

vivo-logo

vivo V2310 Smartphone

Quick Start Guide

V2310 (Y17s)

Welcome to vivo

  • Please read this Quick Start Guide before using your phone, and keep it for future reference.
  • This Quick Start Guide tells you how to set up your phone and use its key features. For more detailed instructions, turn on your phone, then go to Settings
  • About phone > Customer service > Manual. You can also learn more useful information on vivo’s official website.
  • For legal information, go to Settings > About phone > Legal information.
  • For the FCC ID of this phone, please go to Settings> About phone> Status. The features and images shown in this guide are for reference only. They may differ from the actual product.
  • It is recommended to charge the device for at least 30 minutes before turning it on for the first time.
  • Optimum operating temperature is o·c to 35°C and optimum storage temperature is -20″C to 45″C. Extreme heat or cold may damage your device or accessories.

Power button

When the phone is off, press and hold the Power button to turn it on. Press and hold the button when the phone is on to tum the phone off or restart it.

IFT

Operation of this equipment is subject to the following two conditions:

  1. it is possible that this equipment or device may not cause harmful interference and
  2. this equipment or device must accept any interference, including interference that may cause undesired operation
  • The ETM has the Cell Broadcast Service enabled and activated.
  • The device IMEI can be obtained by dialing “#06#.
  • The use of the FM function does not incur additional costs to consumers.

vivo-V2310-Smartphone-fig- \(2\)

FCC statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Caution:   Changes or modifications not expressly approved by vivo Mobile Communication Co., Ltd. could void the user’s authority to operate the device.

Note:

  • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
  • If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.

SAR statement

  • This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
  • The SAR limit set by the FCC is 1.6 W/kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with accessories that contain no metal, with the device positioned at least 15 mm away from the body. RF exposure compliance with any body-worn accessories that contain metal has not been tested and certified, and use of such body-worn accessories should be avoided. Accessories available commercially must be used with a distance of at least 15 mm between the device and the user’s body for body-worn operation.

Tips:
Insert/remove your SIM card using the provided eject tool. To avoid damaging the device, do NOT remove the back cover. This phone supports standard nano SIM cards. If necessary, please go to your local operator shop for a standard nano SIM card.

FCC SAR

  • Head: 0.79 W/kg
  • Body-worn: 0.84 W/kg(15mm distance)
  • Hotspot: 0.90 W/kg(10mm distance)

Electrical Specifications

Adapter Input 100-240V- 50/60Hz 0.5A
Output 5.0V = 2.0A 10.0Wf9.0V= 2.0A 18.0W
Mobile phone 3.89V

Product Standard Accessories

  • Cell phone x 1
  • Charger x 1
  • USB cable x 1
  • Phone case x 1
  • Eject tool x 1
  • Warranty card x 1
  • Quick start guide x 1

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Vivo User Manuals

Related Manuals