everwell SK-7 Hard Start Kit Instruction Manual
- May 15, 2024
- everwell
Table of Contents
Instruction Manual
SK-7 Hard Start Kit
P/N: SK-7
Relay and Hard Start Capacitor
Increases Compressor Torque 600%
This product can be used on all PSC single phase, 115V thru 230VAC.
Air Conditioning Units from 6,000BTU to 120,000BTU (1/2 thru 10HP)
Installation Instruction:
Connect the two wires from SK-7 in parallel with the run capacitor (one wire
each) without removing any original wire. Use special “Piggy Black” terminal
of the SK-7 if all the capacitor terminals are being used.
INSTALL ONLY ON PSC UNITS EQUIPPED WITH RUN CAPACITOR.
277 VAC. 22A Max.
No wiring changes necessary.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>