Dongguan Luckysonics SG30 Griffin Audio Glasses User Manual

Dongguan Luckysonics SG30 Griffin Audio Glasses

GRIFFIN AUDIO GLASSES USER MANUAL

Accessories included in box:

• GRIFFIN glasses x1,
• Charging cablex1,
• Glasses cleaning cloth x1,
• Product manual x1

Griffin is a sunglasses with directional audio. Integrated with latest bluetooth V5.0 audio technology, with the exclusive customized speaker design and acoustic adjustment, you can enjoy high-quality stereo audio with open-ear, the surround voice can get you also.

LENS MAINTENANCE

• Please use mild soap to clean the lenses.
• Use the microfiber lens cloth to wipe the lens softly.

PROHIBITION

• Do not use paper towels、napkins to wipe the lenses. Do not use fabric softener to wipe the lens.
• Do not spit on the lens.
• Do not place the glasses on a heat source.
• Do not use detergent products to clean the glasses.

PRODUCT CHARGE

• Please use the attached USB charging cable to charge the device, just magnetically adsorb the charging end to the charging port of the device, and plug another end into a USB adapter or other USB power source.
• The red light is on during charging, the green light is on when fully charged.

NOTE: The cable must operate correctly during charge, DO NOT rudely switch the contact pins of charge cable which will damage the device.

TROUBLE SHOOTING

Can not power on the device

1. Normally just charge the device one time to reset it.When the charging indication led (red or green) is lit,remove the charge cable, press the power button to restart.
2. Sometimes the battery is out of power, we need charge the device for a while, then restart again.

Other failures

1. Press the power button for more than five seconds to power off the device, waiting for 30 seconds again, then restart the device.
2. Charge the device to reset it. When the charging indication led (red or green) is lit, remove the charge cable, press the power button to restart.

OPERATION

Power on
Press and hold the power button about two seconds, the green indicator light is on, then prompt “power on”from device, now the device is powered on.

Pairing
Method 1: When initial power on the device, the green indicator flashes quickly, now the device is under pairing status.
Method 2: When the device is off, press down the power button five seconds, the green indicator flashes quickly, then prompt “pairing” from device, now the device is under pairing status.

Enable the bluetooth in the setup of mobile phone,search and select “SG30_LuckySonics” in the found device lists, then follow the information prompted in the phone to complete the pairing.

Power off
Press and hold the power button for about five seconds until the red indicator light is on.

Automatic power off
The device will shut down automatically if disconnect with phone for five minutes , or keep motionless without operation for thirty minutes.
When low battery in the device, it will prompt “du-du-du” sound, please charge it in time.

PHONE CALL
Method 1: Click on the induction zone twice continually to answer the phone. Method 2: Press down the power button one time to answer the phone.

PHONE CALL REJECT
To reject the phone call, press down and hold the power button more than one second.

PHONE CALL OFF
When phone call is over, press down the power button one time to turn off the phone.

Music Play/Pause

• During music play, press down the power button one time to pause the music, press down the power button one more time to continue the play again;
• Make the device upside down as below instruction to pause the play also.

Next song
Click on the induction zone twice continually during music play, switch to next song.

Previous song
Click on the induction zone three times continually during music play, switch to the previous song.

Technical specifications

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>