DAYSNEW B1QLQJBo13L Wireless Headphones for TV User Manual

ADH300J
MANUAL/HANDBUCH/MANUEL
(1-10) DEUTSCH(11-18) Frangais(19-27)
www.artiste-audio.com

B1QLQJBo13L Wireless Headphones for TV

FEATURES

1. 30 Meters Wireless Transmission Range
2. 15~20 Hours Working Duration
3. 2.4GHz Digital Wireless Technology
4. One Transmitter can be connected to Several Headphones

COMPATIBLE WITH VARIOUS DEVICES

OUTPUT JACK OPTIONS

Optical OUT|  AUX/3.5mm| RCA jacks labeled “AUDIO OUT”| RCA Other  jacks (usually audio IN)
---|---|---|---
| | **| X**

PACKAGE CONTENTS

1. Wireless Headphone
2. Transmitter/Charging Base
3. 3.5mm to 3.5mm Audio Cable
4. Rechargeable Battery*2 (Installed in Headphone)
5. AC/DC Adaptor
6. 3.5mm to RCA Cable
7. Optical TOSLINK Audio Cable
8. User Manual

FUNCTION INDNTIFICATION

Wireless Headphone

Signal link Green LED Indicator (Solid Green: connected)
(Flash: pairing)
(Flash Quickly: connect new headphone/reconnect}
Power Red LED Indicator (Solid Red: ON)
(Light out: OFF)
ON/OFF Control(press 2 seconds: ON/OFF)
(press 5 seconds when OFF: connect new headphone/reconnect}
Transmitter

Charging Green LED Indicator
(Solid Green: charging
Light out: fully charged
Signal Red LED Indicator
(Solid Red: power/connect Flash: pairing)

1. 3.5mm Audio IN Socket
2. Optical TOSLINK Audio IN Socket
3. DC IN Socket

INSTALLATION AND OPERATION

Optical input (recommended)

Analogue audio input

NOTE:
Please note that only one input{either analogue audio input or opticalinput/TOSLINK)must be connected. If both the analogue audio input andthe optical input/TOSLINK are connected, the priority use is analogue input.

CHARGING THE BATTERIES

Charge the Batteries for about 7 hours before first use.
Charging Duration: 5~7Hours

1. Turn OFF the Headphone.
2. Retract the Headband.
3. Place the Headphone on the Transmitter.

Charging Green LED Indicator (Solid Green: charging/
Light out: fully charged) Signal Red LED Indicator

AUTO OFF

• Transmitter will be OFF automatically if there is no audio source signal for around 3 minutes. If the audio source signal returns, the transmitter will automatically switches ON.
• Headphone will be OFF automatically if there is no audio source signal for around 3 minutes.

Reconnect/Connect more Headphones

1. Disconnect the power of Transmitter.
2. Turn OFF the Headphone. Press ON/OFF control for 5 seconds until the Green LED flashes quickly.
3. Connect the power of Transmitter.
4. Headphone and Transmitter will be connected automatically.

TROUBLESHOOTING

No sound

• Ensure that the Transmitter power ON.
• Ensure that the Headphone is ON, If green LED Indicator on headphone is OFF, please reconnect the headphone to the transmitter.
• The charge level of the Batteries may be too low. Recharge the Batteries.
• Audio device is ON and PLAY.
• The volume of headphone may be too low, adjust the volume to a moderate level.
  The audio signal input level is too low. Increase the volume of the audio device.

Distortion

• Ensure the volume level of Headphone is set to an approximate level.
• The Headphone is too far from the Transmitter, move it closer.
• The audio signal input level is too low. Increase the volume of the audio device.

CAUTION

To protect your hearing, please do not use the headphone at high volume for a long time.
Wireless transmission will produceelectromagnetic signal which may interfere the heart pacemaker or other medical instruments properly function.
Please follow your doctor’ s instruction.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.The device can be usedin portable exposure condition without restriction.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The device must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with FCC’ s radiation exposure limits set forth for an uncontrolled environment.
Work temperature:—10°C~45°C:

• CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Attention should be drawn to environmental aspects of battery disposal.
• The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• WARNING: Please refer the information on exterior bottom enclosure for electrical and safety information before operating the apparatus.
• Use only power supplies listed in the user instructions.
  Adapter model: YLUXA-E050055 or YLUXA-U050055 or YLUXC-—050055 Made By: Dongguan Yinli Electronics Co., Ltd

**** Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

TECHNICAL SPECIFICATIONS

Made In China

Documents / Resources

| DAYSNEW B1QLQJBo13L Wireless Headphones for TV [pdf] User Manual
B1QLQJBo13L Wireless Headphones for TV, B1QLQJBo13L, Wireless Headphones for TV, Headphones for TV, TV
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>