CANARM LOL603 LED Outdoor Lighting Instruction Manual

CANARM LOL603 LED Outdoor Lighting

Product Information

Specifications:

• Model: LOL603
• Type: LED Outdoor Lighting
• Date: 10/22

Product Usage Instructions

Tools and Materials Required:

• Phillips Screwdriver
• Wire Cutters
• Wiring supplies as required by local electrical code
• Pliers
• Wrench

Safety Precautions:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. NOT FOR USE IN LUMINAIRES CONTROLLED BY A DIMMER.
5. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

Installation:

1. Mount the mounting bracket to electrical box using electrical box screws (not included).
2. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Attach the black wire from the light fixture to the black wire in the electrical box. Attach the white wire from the light fixture to the white wire in the electrical box.
3. Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
4. Attach fixture to mounting bracket by tightening the 2 screws.
5. After installation, seal around the top and side perimeter between the fixture and the wall surface with weather resistant caulk. Apply a small amount of weather resistant caulk around the side perimeter between the screws and mounting plate.

Contact Information:
Tel: 613-342-5424, Fax: 800-263-4598

FAQ

• Q: Can this product be used with a dimmer switch?
  A: No, this product is not for use in luminaires controlled by a dimmer.

• Q: How should I clean the fixture?
  A: To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth.

LED OUTDOOR LIGHTING

NEED HELP? Call or Email us first
Our service team is ready to answer your questions… 1-800-265-1833 (English) / 1-800-567-2513 (French) Monday – Friday 8 AM – 5 PM EST. IN CANADA – ressalescanada@canarmna.ca – IN USA – ressalesusa@canarmna.ca

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS

IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS

TOOLS AND MATERIALS REQUIRED:

SAFETY PRECAUTIONS:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. NOT FOR USE IN LUMINAIRES CONTROLLED BY A DIMMER.
5. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

INSTALLATION

1. Mount the mounting bracket to electrical box using electrical box screws (not included).

2. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Attach the black wire from the light fixture to the black wire in the electrical box. Attach the white wire from the light fixture to the white wire in the electrical box.
   NOTE: Do not disconnect any pre-wired connections.

3. Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.

4. Attach fixture to mounting bracket by tightening the 2 screws.

5. After installation, seal around the top and side perimeter between the fixture and the wall surface with weather resistant caulk. The bottom should be left un-caulked to prevent moisture build-up. Apply a small amount of weather resistant caulk around the side perimeter between the screws and mounting plate.

Tel: 613-342-5424, Fax: 800-263-4598

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>