CANARM IOL600 15 Inch Tall Wall Sconce Light Instruction Manual

: May 15, 2024
: CANARM

Table of Contents

CANARM IOL600 15 Inch Tall Wall Sconce Light
Product Information
TOOLS AND MATERIALS REQUIRED
SAFETY PRECAUTIONS
INSTALLATION
Contact information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CANARM IOL600 15 Inch Tall Wall Sconce Light

CANARM-IOL600-15-Inch-Tall-Wall-Sconce-Light-product

Product Information

The Easy Connect TM IOL600 is a light fixture that requires proper installation for safe and efficient use. It comes with an Easy Connect mounting bracket for easy installation. The fixture is designed to be weather- resistant and requires specific electrical connections for proper functioning.

Specifications:

Product Name: Easy Connect TM IOL600
Date: 10/22

Installation Instructions:

Turn off electrical power before starting the installation of the light fixture.
Attach the Easy Connect mounting bracket to the electrical box using electrical box screws.
Tuck electrical wires into the electrical box and position the fixture over the studs on the mounting bracket assembly. Secure the fixture in place with star washers and cap nuts.
Connect (push) electrical wires from the electric box into the correct inserts in the fixture.
If needed, unscrew the thumb screw to remove the bottom cap from the fixture.
Install the specified bulb type and wattage.
For multiple green (ground), black (live), and white (neutral) wires joined in the electrical box, attach a single green, black, and white jumper wire before connecting.
Re-install the bottom cap to the fixture.
Seal around the top and side perimeter between the fixture and the wall surface with weather-resistant caulk. Leave the bottom un-caulked to prevent moisture build-up.

FAQ:

Q: Do I need any specialized tools for installing the Easy Connect TM IOL600?
A: Yes, you will need a Phillips screwdriver and wire cutters as specified in the tools and materials required section of the installation instructions.
Q: Can I clean the fixture while it is still powered on?
A: No, always turn off the power, wait for it to cool, and then wipe the fixture with a clean, soft cloth for cleaning.
Q: What should I do if the product does not look exactly as shown in the figures?
A: Product appearance may vary, but as long as you follow the installation instructions correctly, it should function as intended.
Q: How do I know which wires go into which inserts in the fixture?
A: Refer to the color coding of the wires – black (live), white (neutral), and green (ground) – and match them appropriately with the correct inserts in the fixture.

INSTRUCTIONS ABOUT RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS

TOOLS AND MATERIALS REQUIRED

SAFETY PRECAUTIONS

TURN OFF THE ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.
WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
THIS PRODUCT MUST BE INSTALLED BY THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

NOTE: The product may not look exactly as shown in the figures.

INSTALLATION

Attach the Easy Connect™ mounting bracket to the electrical box with electrical box screws (not included).
Option 1: Connect (push) electrical wires from the electric box (house wiring) into the correct inserts.
Option 2: For multiple green (ground), black (life), and white (neutral) wires joined in the electrical box (house wiring), attach a single “green”, “black” and “white” jumper wire before connecting. Strip 7mm from the 6” jumper wires supplied. Then connect (push) wires into the correct inserts.
Connect (push) electrical wires from the fixture into the correct inserts.
Tuck electrical wires into the electrical box and position the fixture over the studs on the mounting bracket assembly. Secure fixture in place with star washers and cap nuts.
Unscrew the thumb screw to remove the bottom cap from the fixture.
Install specified bulb type and wattage (not included).
Re-install the bottom cap to the fixture.
After installation, seal around the top and side perimeter between the fixture and the wall surface with weather-resistant caulk. The bottom should be left un-caulked to prevent moisture build-up. Apply a small amount of weather-resistant caulk around the side perimeter between the cap nuts and mounting plate. $CANARM-IOL600-15-Inch-Tall-Wall-Sconce-Light-fig- $5$$