euker PB2 Magnetic Wireless Power Bank User Manual
- June 9, 2024
- euker
Table of Contents
Power Bank PB2
Magnetic Wireless Power Bank
User Manual Model: 16
PB2 Magnetic Wireless Power Bank
Thank you for choosing the Euker magnetic wireless power bank!
Please read this manual before first use and keep it handy for future
reference.
Product Description
Package Contents
Specifications
USB-C Input: 5V 3A, 9V 2A
USB-C Output: 5V 2.4A, 9V 2.2A, 12V **1.5A
Wireless Output: 15W/10W/7.5W/5W
Battery Type: Lithium Polymer
Battery Capacity: 6700mAh/3.8V/25.5Wh
Rated Capacity: 4080mAh (5V=2.4A)
Size: 4.25×2.61×0.61in/108mm66.4mm15.4mm
Weight:** 6.3402/180g
Operating Instructions
-
Charge the power bank
Connect the USB-C connector of the supplied cable to the power supply device.
The power supply device could be the AC charger, as shown in picture(1), or the computer USB-C interface as shown in picture(2). And then connect the other end into the USB-C port of the power bank to keep the power bank charged.
-
Power on
♦ Auto positioning: Put it on.The mobile phone and the power bank are magnetically adsorbed and automatically positioned, then wireless charging is starting with a snap.
♦ By a short press of the button, the device will be powered on (the battery indicator should be on), then wireless charging is starting.
-
Shut down
♦ Double-click the button to shut down the power bank.
♦ Normal discharge mode: the discharge function is turned off about 40 seconds after the mobile phone has been disconnected from charger or the mobile phone has been fully charged. The power bank will then be turned off and enter a shutdown state. -
Description of power display when charging
The status of the battery indicator when charging the power bank with the charging cable:
Status| Battery level (0%-33%)| Battery level (33%-66%)| Battery level
(66%-100%)| Battery level (100%)
---|---|---|---|---
Charging| 33% battery indicator flashes| 66% battery indicator flashes|
100% battery indicator flashes| All three batter indicator lights
are on
5. Description of power display when discharging
♦ When using the power bank to charge the mobile phone, the status of the
battery indicator light:
Status| Battery level (0%)| Battery level (0%-5%)| Battery level
(5%-33%)| Battery level (33-66%)| Battery level (100%)
---|---|---|---|---|---
Discharging| The battery indicator
lights are all off| One battery indicator
flashes| One battery indicator
light is always on| Two battery indicator
lights are always on| Three battery indicato
lights are always on
♦ The status of the wireless charging indicator light when using the power bank to charge the mobile phone:
Status| Wireless charging
standby| Fast wireless charging| Slow wireless charge| Wired charging|
Abnormal wireless
charging
---|---|---|---|---|---
Wireless charging
indicator| Blue LED light is
always on| Orange LED light flashes
slowly| Orange LED light is
always on| Wireless charging
light is off| Blue and orange LED
light flash alternately
FAQs
Q: Will this work with any phone other than an iPhone?****
– A: It is only recommended to charge iPhone 14 / 13/ 12 series phones through this magnetic battery, because only iPhone 14/ 13 / 12 series phones support magnetic charging. You can only use the USB-C port to charge other USB-C devices.
Q: What is the wattage of the magnetic wireless charging mobile power bank?****
– A: The maximum output power of wireless charging for charging iPhone 14/ 13/ 12 series mobile phones is 7.5W.
Q: Will the magnetism work if the phone has a case?****
– A: This magnetic wireless charging power bank can be used well with the magsafe iPhone 14 / 13/ 12 series mobile phone protective case. If you use a normal protective case, the magnet will be very weak. It is recommended that the mobile phone be matched with a magnetic mobile phone protective case. Thick protective cases are not supported, as well as nonmagnetic phone cases such as OtterBox cases which are not compatible.
Q: Is it normal for the battery to heat up when charging?****
– A: Compared with regular charging, the technology of wireless charging may cause slight heat. However, the temperature is within the normal operating temperature range of the mobile phone, so please use it with confidence.
Important Safety Instructions
Basic precautions should always be followed when using this product, including:
- Store the product in a cool, dry place.
- Do not store the product in a hot or humid environment.
- Do not expose the product to heat or fire.
- Do not use the harmful chemicals or cleaning agents to clean the product.
- Operating temperature should be between 0°C to 45°C/32°F to 113°F.
- Do not disassemble the product. When servicing or repair is required, take it to a qualified service person. Improper reassembly may result in a risk of fire or personal injury.
- If the product is not used for a long time, it should be charged and discharged every three months.
- When charging the device, the product may become hot. This is a normal operating condition and should not be a cause for concern.
- Under normal conditions, battery performance will decrease within a few years.
- Misuse, dropping or excessive force may cause product damage.
- When handling secondary cells or batteries, store batteries or batteries of different electrochemical systems separately.
- Please note that a discharged battery may cause fire or smoke. Insulate the terminals with tape.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
EU Representative: Ma Wei Aasheng International
Investment Consulting GmbH
Address: Rodenberger Allee 23, 31542 Bad Nenndorf. Germany
Tel: +49 15206266951
UK Representative: CET Product Service Ltd.
Address: Beacon House Stokenchurch Business Park,
Ibstone Rd, Stokenchurch High Wycombe HP14 3FE UK
Tel: +447419325266
Customer Service:
support@eukers.com
www.eukers.com
FCC ID: 2A4M2-16 Made in China
Documents / Resources
|
euker PB2 Magnetic Wireless Power
Bank
[pdf] User Manual
2A4M2-I6, 2A4M2I6, PB2 Magnetic Wireless Power Bank, PB2 Power Bank, PB2, I6
Power Bank, Power Bank, Wireless Power Bank, Magnetic Power Bank, Magnetic
Wireless Power Bank
---|---