xiaomi 214409307 10000mAH Li-Polymer Power Bank 3i with 18W Fast Charging User Manual

June 5, 2024
Xiaomi

Xiaomi 214409307 10000mAH Li-Polymer Power Bank 3i with 18W Fast

Charging%PRODUCT

Product Overview

Thank you for choosing 10000mAh Mi Power Bank 2S.
This product is a high-capacity portable charger that uses a Li-polymer battery, and a charge and discharge chip for a safe, efficient, and compatible user experience.

  • The Power Check button is not a Power button.
  • 10000mAh Mi Power Bank 2S detects charging and discharging automatically.
  • The Power indicator goes off 2 minutes after being fully discharged.

Safety

  • Mi Power Bank has multiple safeguard technologies to provide over-charge, over-discharge, high temperature, and short circuit protection in all working conditions.

Efficiency

  • Supports fast charging at 5.1V/2.4A, 9V/1.6A, and 12V/1.2A only one output port is used. The total power can be up to 15W when two output ports are used together, at 5.1V/2.4A maximum output for each one.

Compatibility

  • The product has a built-in USB charging controller, compatible with most smartphones, tablets, and devices. It supports mainstream fast charging devices and can boost up to 9V/12V. Quality: Li-polymer battery, charge, and discharge chip. FIG-1

Charging
Connect with Mi Power Adapter to charge Mi Power Bank. The indicator shows charging conditions as follows:

Power level LED1 LED2 LED3 LED4
0-25% Blinking Off Off Off
25-50% On Blinking Off Off
50-75% On On Blinking Off
75-99% On On On Blinking
Fully charged On On On On
Charging error Blinking Blinking Blinking Blinking

Discharging
Connect with Mi Power Bank to charge your device. The indicator shows discharging conditions as follows:

Power level LED1 LED2 LED3 LED4
Undervoltage Off Off Off Off
0-25% Blinking Off Off Off
25-50% Blinking Blinking Off Off
50-75% Blinking Blinking Blinking Off
75-100% Blinking Blinking Blinking Blinking

Low-current discharge: when Mi Power Bank is not charging, double press the Power Check button to enter low-current discharge mode to charge small devices, such as Bluetooth headphones and smart bands. The indicator LEDs will turn on one by one in succession, indicating that Mi Power Bank is in low- current discharge mode. To exit low-current discharge mode, press the Power Check button.

Specifications

  • Model: PLM09ZM
  • Capacity: 10000mAh 3.7V (37Wh)
  • Operating temperature: 0°C~40°C
  • Input port: Micro-USB
  • Input: 5.0V 2.0A/9.0V 2.0A/12.0V 1.5A
  • Output: Single port 5.1V 2.4A/9.0V 1.6A MAX/12.0V 1.2A MAX
  • Dual ports: 5.1V 2.4A (15W MAX)
  • Charging time: approx. 3.5 hrs (9V/2A or 12V/1.5A adapter, standard cable); approx. 5.5 hrs (5V/2A adapter, standard cable)
  • Battery type: Li-polymer battery
  • Rated capacity: 6500mAh 5.1V (TYP 1A)
  • Dimensions: 147 × 71.2 × 14.2 mm
  • Output port: USB-A

Note

  • Make sure your Mi Power Bank is fully charged on its first use.
  • When charging a device with Mi Power Bank, make sure your device displays the battery charging icon and the Mi Power Bank is working properly.
  • When recharging Mi Power Bank or charging a device with Mi Power Bank, make sure you use a standard charging cable.
  • If all indicators go off when charging a device with Mi Power Bank, recharge your Mi Power Bank shortly.
  • When charging a device with Mi Power Bank, the device will use Mi Power Bank’s power first.
  • Disconnect Mi Power Bank to avoid further discharge once your device is fully charged.
  • When Mi Power Bank enters protection mode (LEDs remain off after pressing the Power Check button) due to short circuits or other reasons, charge it with an external charger to resume.

Warning

  • Mi Power Bank contains a Li-ion battery cell. Do not open the casing to avoid cell damage or other hazards.
  • Do not dismantle, crush, puncture, and short circuit Mi Power Bank, or expose it to liquids, fire or environments where the temperature is above 60°C (140°F).

CE

  • Hereby, declares that this equipment is in compliance with the Electromagnetic Compatibility Directive 2014/30/EU.

Test standards

  • EN55032:2015 / EN61000-3-2:2014 / EN61000-3-3:2013 / EN55024:2010

Anti-counterfeit Label Instructions

For further information, please go to www.mi.com

Read this manual carefully before use, and retain it for future reference.

  • Manufactured for: Xiaomi Communications Co., Ltd.
  • Manufactured by: Zimi Corporation (a Mi Ecosystem company)
  • Address: A913, No. 159 Chengˆiang Middle Road, Jiangyin, Jiangsu, China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals