anslut 016872 Flagpole LED String Instruction Manual

June 4, 2024
anslut

anslut 016872 Flagpole LED String

anslut 016872 Flagpole LED String-PRO

SAFETY INSTRUCTIONS

  • Do not connect the product to a power point while the product is still in the pack.
  • Intended for indoor and outdoor use.
  • Check that no light sources are damaged.
  • Do not connect two or more string lights together electrically.
  • No parts of the product can be replaced or repaired. The whole product must be discarded if any part is damaged.
  • Do not use sharp or pointed objects during assembly.
  • Do not subject the power cord or wires to mechanical stress. Do not hang objects on the string light.
  • This is not a toy. Be careful if using the product near children.
  • Disconnect the transformer from the PowerPoint when the product is not in use.
  • This product must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
  • The product is not intended to be used as general lighting.
  • The LED light sources are not replaceable. When the light sources have reached the end of their useful life the complete product must be replaced.
  • Recycle the product at the end of its useful life in accordance with local regulations.

WARNING: The string of lights may only be used if all seals are fitted correctly.

SYMBOLS

  • Approved in accordance with the relevant directives.
  • Intended for indoor/outdoor use.
  • Safety class III.
  • Recycle discarded product as electrical waste.

TECHNICAL DATA

  • Rated voltage 230 V ~ 50 Hz/31 VDC
  • Output 440 x 0.06 W
  • No. of LEDs 440
  • Safety class III
  • Protection rating IP44

DESCRIPTION

anslut 016872 Flagpole LED String-1

INSTALLATION

  1. Fasten the product to the flagpole line
  2. Hoist the product to the top of the flagpole.
  3. Fasten the product to the ground around flagpole. Make sure all the parts of the product are evenly spaced to each other and the flagpole. Roll up surplus string light on the bobbins.
  4. Connect the product to the power supply.

HOW TO USE

  1. Plug the plug into a power point. The string light goes on and shines constantly.
  2. Press the switch to activate the double timer function. The switch goes green when the timer is activated.
  3. Press the switch again to switch off the string light.

TIMER FUNCTION
The product has a double timer that controls the string light as follows – on 8 hours, off 6 hours, on 2 hours and off 8 hours.

OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)

Care for the environment!
Must not be discarded with household waste! This product contains electrical or electronic components that should be recycled. Leave the product for recycling at the designated station e.g. the local authority’s recycling station.
Jula reserves the right to make changes. In the event of problems, please contact our customer service  www.jula.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

anslut User Manuals

Related Manuals