Neomounts LCD-504A Brateck Ceiling Mount for 42 Inch TV Instruction Manual

Neomounts LCD-504A Brateck Ceiling Mount for 42 Inch TV

Product Information

• Product Model: FPMA-C060BLACK
• Manufacturer: www.neomounts.com
• Supported VESA Sizes: 75mm x 75mm, 100mm x 100mm, 200mm x 200mm, 220mm x 220mm
• Weight Capacity: 0-30 kg
• Adjustable Height Range: Minimum 608mm, Maximum 858mm

Product Usage Instructions

Step 1: Install Ceiling Plate

1. For wooden or plasterboard ceilings: Install the ceiling plate on a wooden beam or joist using screws provided (W-A).
2. For solid brick or concrete ceilings: Attach the ceiling plate directly using screws provided (W-A and W-B).

Step 2: Attach the rod to the ceiling plate Attach Mounting Arm

1. Insert the mounting arm (E) into the ceiling plate (B) and tighten the screws (N and I) to secure.
2. Attach the other end of the mounting arm to the main bracket (A) using screws (F and A).

Step 3: Connect the extension pole  Adjust Tilt and Rotation

1. Loosen screws (E and B) to adjust the tilt and rotation of the display.
2. Tighten the screws once the desired position is achieved.

Step 4: Assemble the VESA plate Attach Display

1. Attach the display to the main bracket (A) using the appropriate M-size screws provided.
2. Refer to the user manual of your display for specific instructions on attaching it to a VESA mount.

Step 5: Attach the VESA plate to the extension pole Cable Management

1. Route and organize cables using the cable management clips (K and Q).
2. Secure cables using cable ties (M-D and M-F).

Step 6: Attach the TV to the VESA plate

1. Make any necessary adjustments to the display’s height, tilt, and rotation.
2. Tighten all screws securely to ensure stability.

Step 7: Adjust the mount to the desired position

Note: *Additional accessories like screws and brackets may be required for specific installations and are not included with the product. Refer to the user manual of your display for any additional requirements.

Monitor ceiling mount

Product Dimensions

PARTS

CAUTION

1. To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for tuture reference

2. The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.

3. The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.

4. It is recommended that the mount be installed by qualified personnel only.

5. At least two persons are needed to install or remove the product to avoid hazard of falling objects.
   Please carefully inspect the area where the mount is to be installed:

   • Avoid places that are subject to high temperatures, humidity or contact with water.
   • Do not install the product near air conditioning vents or areas with excess dust and fumes
   • Only install on vertical walls and avoid slanted surfaces.
   • Do not installin olces supiect to any shock or vibration.
   • Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.

6. Maintain sufficient space around the display to ensure adequate ventilation.

7. To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.

8. The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.

9. Do not modity any accessories or use broken parts. contact your dealer with any questions

10. Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).

11. Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.

12. Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.

13. Please consult the English language manual for any dispute on conditions.

References

• Neomounts

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>