Roth QuickStop Pro1 User Guide
- June 4, 2024
- Roth
Table of Contents
Roth QuickStop Pro1 QuickGuide
QuickStop Pro1
WHAT DO I DO WHEN…?
We are home – set operating mode to HOME We are traveling – set operating mode
to AWAY We are using a lot of water – set operating mode to PAUSE
WHAT SHOULD I DO ABOUT …?
WARNING – clear the warning and then check the cause.
ALARM – First check the cause. Ensure there is no visible leakage. Take
action if needed. Turn the water back on by clearing the alarm.
Find the leak detection guide on
www.Roth.Support/QuickStop_Pro_UK
In case of repeated alarms the cause must be carefully investigated.
-
The TEST indicator light flashes if the system is running a tightness test and keeps the light on while the device is monitoring flow.
-
The current operating mode lights up
continuously = HOME
flashes quickly = AWAY
flashes slowly = PAUSE -
Press MODE for toggling between HOME/AWAY mode.
Keep the button pressed to go to PAUSE mode, in order to consume water for a longer time period without getting an alarm. -
While the VALVE indicator is on, the valve is closed, and water cannot flow through it.
-
The NETWORK indicator turns off when the device is offline; flashes when the device is in pairing mode; and stays on when the device is online and connected to the Roth Cloud service.
-
Flashes on WARNING before the water is shut off. The lights are up continuously on ALARM and the water is shut off.
-
Press CLEAR briefly to silence the alarm sound. Keep it pressed to clear the alarm.
ROTH UK Ltd.
Phone +44 (0) 1984 623982 ·
E-mail: enquiries@roth-uk.com ·roth-
uk.com
References
- thisisFINLAND
- Frontpage | Norge.no
- Roth Danmark
- Roth Finland
- Roth Norge
- Roth Sverige
- Roth UK
- Hej! Welcome to sweden.se – the official website of Sweden
- UK.COM