Altronix NETWAY1BT Single Port 802.3bt 90W Injector Installation Guide
- June 3, 2024
- Altronix
Table of Contents
Altronix NETWAY1BT Single Port 802.3bt 90W Injector
Overview
Altronix NetWay1BT Single Port Midspan Injector provides 802.3bt (90W) power and passes data for PoE-compliant devices. PoE device may be located up to 100m from the unit.
Specifications
Agency Listings:
- CE European Conformity.
Input:
- 115VAC, 60Hz, 1.2A or 230VAC, 50/60Hz, 0.75A.
Power Output:
- Maximum power: 90W
- Power provided using all 4 pairs on structured cable.
- IEEE 802.3af (15W), IEEE 802.3at (30W) or 802.3bt (90W) compliant.
- Aux. Class 2 power-limited output rated @ 56VDC/90W.
- Integral surge protection.
Ethernet:
- Connectivity: RJ45.
- Wire type: 4-pair Cat-5 or higher structured cable.
- Distance: up to 100m.
- Speed: 10/100/1000Mbps, half/full duplex, auto negotiation.
Environmental:
-
Operating Temperature:
30W: – 30ºC to 75ºC (– 22ºF to 167ºF). 60W: – 30ºC to 70ºC (– 22ºF to 158ºF). 90W: – 30ºC to 55ºC (– 22ºF to 131ºF).
Storage Temperature:- – 30ºC to 85ºC (– 22ºF to 185ºF).
-
Humidity: 20 to 85%, non-condensing.
Applications:
- Provides PoE/PoE+ and Hi-PoE for cameras/devices.
Mechanical:
- Unit can be shelf mounted.
- Enclosure Dimensions (H x W x D approx.): 1.7” x 4.1” x 7.2” (44mm x 105mm x 183mm).
- Product weight (approx.): 2.2 lb. (1.0 kg).
- Shipping weight (approx.): 3.2 lb. (1.45 kg).
Installation Instructions
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire suitable for the application. NetWay1BT is intended for indoor use only.
- Place NetWay1BT in the desired location on table or desktop only.
- Plug the grounded AC line cord (included) into the IEC 320 connector of the NetWay1BT unit. Plug the unit into a reliable earth-grounded socket. When using multiple units the sum of the individual nameplate ratings should not exceed the supply circuit rating. Do not connect to a receptacle controlled by a switch.
- Connect the structured cable from UL Listed ethernet switch or video server to RJ45 jack marked [IN] on NetWay1BT (Fig. 1).
- Connect the structured cable from PoE device to RJ45 jack marked [OUT] on NetWay1BT (Fig. 1).
- PoE ON LED will illuminate indicating PoE device is turned on (Fig. 1).
- Connect the device to be powered to terminals marked [+ Aux. –].
Note: Do not exceed 90W.
Technical Specifications
| Parameter | Description |
|---|---|
| No. of Ports | One (1) IEEE 802.3at (30W), IEEE 802.3af (15W) and 802.3bt (90W) |
compliant
Input Power Requirements| 115VAC, 60Hz, 1.2A or 230VAC, 50/60Hz, 0.75A.
Indicators| Port Status and Power LED.
+ Aux. –| Class 2 power-limited output rated @ 56VDC/90W.
Environmental Conditions
| Operating Temperature:
30W: – 30ºC to 75ºC (– 22ºF to 167ºF).
60W: – 30ºC to 70ºC (– 22ºF to 158ºF).
90W: – 30ºC to 55ºC (– 22ºF to 131ºF).
Relative humidity: 85%, +/ – 5%, non-condensing. Storage Temperature: – 20º to 70ºC (– 4º to 158ºF). Operating Altitude: – 304.8m to 609.6m.
Regulatory Compliance| CE European Conformity.
Dimensions
NetWay1BT Chassis Mechanical Drawing and Dimensions
(H x W x D approx.):
1.7” x 4.1” x 7.2” (44mm x 105mm x 183mm)
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty IINetWay1BT H19U.