Tewisefaok VC-L11 Rechargeable Vacuum Cleaner Dust Display Light Instruction Manual

May 15, 2024
tewisefaok

Recharge able Vacuum Cleaner
Dust Display LightTewisefaok VC-L11 Rechargeable Vacuum Cleaner Dust
Display Light Instructions Manual

Product Overview:

The intimate spaces of our homes harbor countless concealed particles of dust, evading the discerning gaze of the unaided eye—a silent menace that harbors the potential for health concerns. Rising to meet this challenge, Tewisefaok unveils the Rechargeable
Dust Display Lamp. Guided by research, a 530nm wavelength green light has been harnessed to unveil these hidden remnants, facilitating a comprehensive cleansing experience. Its compatibility extends to most of vacuum cleaner brands such as Dyson, Shark, Bissell, Eureka, INSE, Tineco. etc.

Package Included:

Tewisefaok VC-L11 Rechargeable Vacuum Cleaner Dust Display Light - Package
Included

Pre-Installation Preparations:

3.1 Please charge before use. During charging, the indicator light is red, and it turns green when fully charged.
3.2 Before installation, temporarily place the dust display lamp on the left side of the vacuum head, determining the optimal lighting angle in advance to ensure that the vacuum cleaner does not obstruct the light.Tewisefaok VC-L11
Rechargeable Vacuum Cleaner Dust Display Light - assembly
13.3 If the left side of your vacuum cleaner head is uneven or has slopes unsuitable for direct installation, you can create a suitable spacer by DIY using a plastic block.Tewisefaok VC-L11 Rechargeable Vacuum Cleaner Dust Display Light -
assembly 2

Installation Instructions:

4.1 Begin by assembling the light and the buckle together.Tewisefaok VC-L11
Rechargeable Vacuum Cleaner Dust Display Light - assembly
34.2 Nanotape boasts double-sided adhesive capabilities. Peel off one side and affix the Nanotape to the buckle side of the dust display lamp.Tewisefaok VC-L11
Rechargeable Vacuum Cleaner Dust Display Light - assembly
44.3. Place the black pad beneath the dust display lamp, elevating it by 1mm for optimal visibility of dust particles. Then, affix the dust display lamp to the left side of the vacuum head.Tewisefaok VC-L11 Rechargeable Vacuum Cleaner Dust
Display Light - assembly 5Pro Tip 1: Our Dust-Reveal Light  installation may affect the disassembly and cleaning of specific models (such as Dyson V10 and V11). For this reason, we provide multiple traceless nanotapes, ensuring a secure reattachment after each cleaning.

Instructions for Use:

5.1 Use your foot to lightly kick the dust display lamp switch for turning the light on and off.Tewisefaok VC-L11 Rechargeable Vacuum Cleaner Dust Display
Light - assembly 65.2 When the dust display lamp obstructs vacuuming along walls or corners, we recommend rotating the vacuum cleaner and using the right side (the side without the light) for cleaning. 5.3 During daylight, the brightness caused by sunlight may affect the visibility of dust. It is advisable to use the light during the night with the room lights off.
5.4 The Dust-Reveal Light can only display dust on hard floor surfaces and is not suitable for use on surfaces with soft materials, such as carpets.

Important Notes:

6.1 While this product is IPX6 waterproof, it is not advisable to immerse it in water to prevent short circuits.
6.2 Never direct the light towards human or animal eyes.
6.3 Keep the product away from fire to prevent explosion.
6.4 Unauthorized disassembly may lead to internal short-circuiting – avoid.
6.5 Use only specified battery types. Refer to the parameter table for battery model.
6.6 Refrain from using water or chemicals for cleaning. Utilize a dry, clean towel instead.
6.7 Do not short-circuit the battery, as it could result in danger.

Troubleshooting:

After opening, if the dust display lamp on the vacuum cleaner fails to emit a green light, appears dim, lacks brightness, or flickers frequently, please check if the lithium battery is depleted. Charging the light should restore normal operation. If the issue persists, please contact the seller for further assistance.

Product Specifications:

Item Name Dust Display Light
Item Dimensions 62 28 20mm
Power 1 W
Battery Type Lithium Battery
Battery Voltage 3.6 V
Battery Capacity 240 mAh
Charging Current 100 mA
Charging Voltage 5 V
Light Wavelength 530nm

Disclaimer:

9.1 Warranty does not cover product damage resulting from improper operation as per the provided instructions.
9.2 Our company shall not be held accountable for human life or property safety concerns resulting from improper operation in accordance with the instructions.
9.3 Discrepancies in product size and color might arise due to variations in personal perception and measurement methods. Such differences are normal and actual products should be taken as the reference.
9.4 The company holds the ultimate authority for the final interpretation of the product.

Tewisefaok is dedicated to enhancing home hygiene and health. Currently, most households harbor hidden hygiene issues that are often invisible to the naked eye. Tewisefaok continuously explores technology to uncover these unseen hygiene concerns. Our goal is to create a genuinely immaculate living environment, delivering true health for your home.

Product name: Vacuum cleaner dust display light
Package dimensions(mm): 68(L)33(W)80(H)
Weight: 30 g

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals