PYLE PPHP1037UB Wireless BT Loudspeaker PA Cabinet Speaker System User Manual

PYLE PPHP1037UB Wireless BT Loudspeaker PA Cabinet Speaker System

We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the Speaker System. We also recommend that you keep this manual in a safe and handy place for future reference.
CAUTION
WARNING! DON’T OPEN THE MACHINE TO AVOID ELECTRIC SHOCK, PLEASE ASK HELP FROM PROFESSIONAL TECHNICIANS.

SAFETY INSTRUCTION

1. Read this manual carefully before using. Retain for future reference.

2. All warnings on the speaker and in the operating instructions should be adhered to.

3. Do not use this apparatus near water.

4. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not install the speaker in an airtight location.

5. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

6. Switch OFF and unplug then use a soft cloth to clean the exterior of the unit if it becomes dirty. If necessary, use a damp cloth that has been wrung out well to wipe it.

7. Unplug this apparatus during lightning storms or when unused for long periods of time.

8. Keep foreign objects and liquid from entering the unit to avoid a short circuit, re and electrical accidents.

9. Place the speaker in a dry location.

10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture , does not operate normally, or has been dropped.

Control & Layout

1. Iphone input: Allows you to connect Iphone with a 3.5mm connector.

2. Balanced Microphone Input: Connector for a Balanced microphone input.

3. Microphone input: Allows you to connect a microphone with a 6.3mm connector.

4. RCA Line-In: Allows you to connect an external audio device (CD, radio/DVD, etc) with RCA connectors.

5. XLR Line-In: Allows you to connect an external audio device (CD, radio/DVD, etc) with XLR connectors.

6. Signal output: Use 6.35mm jack to connect amplifier or even another powered speaker cabinet in cascade using a XLR connector.

7. SD card /USB

8. SD card /USB

9. MP3/Iphone Volume control: Set the MP3/Iphone volume level.

10. Mic volume control: Use this control to set the volume level of Microphone.

11. Line-In signal volume control: Use this control to set the volume level of the Line-In signal.

12. Volume control: Set the volume level.

13. Treble: Use it to set the treble level

14. Bass: Use it to set the bass level

15. AC 110/220 Voltage Selectable

16. On/Off Power Switch: Press to power on/off the speaker

17. AC power: To connect the AC power cord

18. Fuse

A. MODE: Press to change USB/SD/Wireless BT.
B. PLAY: Press to play songs or pause.
C. REC: Recording to USD or SD.
D. REPT : Press to select repeat mode: one, all or random.
E: PREV: Press to jump to the previous song.
F: NEXT: Press to jump to next song.

Wireless BT Function Instruction

1. Press ‘MODE’ to enable Wireless BT and connection to your device.
2. Once ‘Bluetooth’ appears on the LCD screen it will read ‘connected’ or ‘unconnected’ whether your device has paired with the speakers.
3. Allow the speakers to search for Wireless BT connection.
4. Once, a Wireless BT connection is established with a paired device, the screen will prompt you for a 4-digit pass code, enter “0000” and agree to connect
5. The LCD screen will read ‘connected’ and a Wireless BT connection has been established.

Record Function Instruction:

By pressing the ‘REC’ button you will have the ability to record to your USB and SD memory cards. Once your selected memory device is inserted (ei. USB Flash or SD memory card) you will be able to record and delete audio files directly from the speaker’s control center and LCD screen.

2-Way High-Powered Speaker with MP3, Wireless BT Music Streaming, Record Function, USB and SD Memory Readers & Remote Control.

CAUTIONS
Do not place the microphone against the speaker, it can cause feedback echo and it will damage the system.
EXTRA FUNCTIONS
6.3 And XLR connectors marker as LINE OUT can handle an amplifier or even another powered speaker cabinet. On the bottom of the speaker there is a hole to place a stand.

Electrical Safety

All products are fitted with a detachable power cord (supplied) which connects to the AC mains and the back panel of the loudspeaker. The power cord has an IEC
female connector on one end and male mains connectors on the other end. This cord is supplied specially to accommodate the different worldwide safety and electrical code requirements. The power cord supplied with your product has a 3-pin  plug. Do not cut off or damage the grounding plug. Like any electrical appliance, your EON powered speakers should not be used in water or when wet.

Product design and specifications are subject to change without previous notice.

System Features:

• Loudspeaker PA System

• Rugged, Durable & Reliable Sound

• Bluetooth Wireless Streaming Ability

• Speaker System: 10” Woofer, 1.0” Tweeter

• Compression Driver with Titanium Diaphragm

• 2-Way Full Range Audio Projection

• Built-in Amplifier

• Fully Featured 2-Channel Mixer

• Aux-In (3.5mm) Input Connector Jack

• RCA (L/R) Stereo Line Input Connectors

• Ability to Connect External Devices (Smartphones, MP3 Players, Tablets, etc.)

• USB Flash & SD Memory Card Readers

• USB Reader Doubles as Device Charging Port

• FM Radio

• Digital LCD Display Screen

• ID3 Tag Song Readout Info: LCD Displays Song Title/Song Time

• Touch Button & Rotary Controls

• Mic Level, Input Level & Volume Control

• Master Volume, Treble, and Bass Adjustable

• 1/4” Microphone Input

• 1/4” Line Output Connector Jack

• (2) XLR Input Connector Jacks for Microphone/Guitar

• Convenient Carry Handles

• 35mm Speaker Stand Mount

• Engineered Heavy Duty ABS Housing

Wireless BT Connectivity:

• Instantly Stream Music from Your Wireless BT Devices

• Works with All of Your Favorite Devices (iPhone, Android, Smartphone, iPad, Tablet, Computer, etc.)

• Wireless BT Version: 2.1+EDR

• Wireless BT Wireless Range: 100’+ Feet

• Wireless BT Network Name: ‘Pyle Speaker’

MP3 Audio Recording Ability:

• It’s Easy: One Button Record Activation

• Record Audio as Streamed through the Speaker System

• Ability to Record Vocals via Microphone

• Can Also Record Audio via Line & Aux Inputs

• Records to USB Flash & SD Memory Card

• Audio File Type Created: .WAV

• Easy Transfer to PC & Mac

Subwoofer:

• Size: 10” -inch

• Material: Stamped Steel Basket

• Impendence: 8 Ohm

• Magnet: 40 oz.

• Voice Coil: 50mm, 2” -inch

• Sensitivity: 96dB

• Frequency Response: 40Hz-22kHz

Tweeter:

• Size: 1.0” -inch

• Material: Titanium

• Impendence: 8 Ohm

• Sensitivity: 110dB

• Voice Coil: Kapton

• Frequency Response: 600Hz-20kHz

Technical Specs:

• Max Power Output: 700 Watt

• RMS Power Output: 350 Watt

• Amplifier Class: AB

• Digital Audio File Compatibility: MP3, WMA

• Maximum SD/USB Flash Memory Support: 32GB

• 2 XLR and 2 1/4″ TS/Unbalanced with RCA

• T.H.D.:1%

• S/N Ratio: 72dB

• Crossover Frequency: 2.2kHz

• 110/220 Voltage Selectable

• Dimensions (L x W x H): 14.1” x 11.4” x 21.2″

What’s in the Box:

• 10” Wireless BT PA Speaker

• Remote Control

• Power Cable

Questions? Issues?
We are here to help!
Phone: (1)718-535-1800
Email:support@pyleusa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>