SW-MOTECH HTA.01.682.Series Legend Gear Side bag system User Manual

SW-MOTECH HTA.01.682.Series Legend Gear Side bag system

Thank you for choosing this premium product from SW-MOTECH. Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required le. g. ABE certifications), are also available for download at our webshop. Installation and/or maintenance of this product require good technical understanding! For your own safety, SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work! Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist. This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behavior and/or stability of your vehicle.

GENERAL INFORMATION

Observe the country-specific regulations concerning vehicle registration/ operation as well as TUV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
PREPARATION: Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
MOUNTING: All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturer’s specifications or replaced by parts delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with a medium-strength liquid thread locker. Torque specifications undefined by SW-MOTECH must be obtained from the vehicle manufacturer or by a specialist workshop!
FUNCTION CHECK: After installation makes sure that all parts and connections previously removed are properly replaced. Also make sure that no moving parts are obstructed and no function of the vehicle is hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all screw connections and the proper fit of the product.

PRODUCT SPECIFIC INFORMATION

ATTENTION: It is essential to observe the country-specific regulations regarding the lighting equipment (reflectors]! If the reflectors mounted to the vehicle in the factory setting are covered by the side carriers, the reflectors must be removed and/or attached elsewhere in the same mounting position!

PARTS LIST

Part| Anzahlb

Quantityb

| N-m ‘
---|---|---
Side Carrier left|  |
Spacer Bracket| 1 /1|
Rubber Damper| 1 /1|
Hexagon Socket Screw; black| 1 /1| 20
Stopper Spacer| 1 /1|
Lock Nut with Flange; black| 1 /1|
Plastic Plug| 1 /1|
 |  |
Carrier Bracket; left| 1 /1|
Countersunk Screw; black| 2 /2| 20
Spacer; black| 2 /2|
Hexagon Socket Screw, short head; black| 1 /1|
Washer; black| 1 /1|
 |  |
Side Carrier right|  |
Spacer Bracket; right| 1 /1|
Countersunk Screw; black| 212| 20
Spacer; black| 212|
Countersunk Part| 1 /1|
Countersunk Screw; black| 1 /1| 3,5
Washer; black| 1 /1|
Lock Nut with Flange; black| 1 /1|
 |  |

Note: All measurements in millimeters. The second number indicates the total quantity of the part in the delivery. No torque specifications: Use the torque defined by venicle manufacturer! Ine standard torque in this tadle can be used as long as it is within the vehicle manufacturer s specifications.

MOUNTING

ATTENTION: Do not remove the screws on the right side until you have completed the assembly on the left side of the vehicle! Remove the upper screws and for mounting on the left side also the the shown screw of the suspension strut.

Inser the rubber damper (2) into the shown opening of the spaceer bracket |1). Attach the stopper spacer (4) to the spacer bracket [1], as shown in the drawing.
ATTENTION: Use liquid thread locker!
Tighten the screw as specified. Then insert the plastic plug (6) into the opening of the stopper spacer (4).

Attach the spacer bracket [1) and the carrier bracket (7) to the left side of the vehicle.
ATTENTION: Use liquid thread locker!
Tighten the screws (8) as specified. Tighten the screw (10) with the manufacturer’s specified torque.

Attach the countersunk part (15) to the carrier bracket (12), as shown in the drawing.
ATTENTION: Use liquid thread locker!
Tighten the screw [16) as specified. Attach the carrier bracket (12) on the right side to the vehicle.
ATTENTION: Use liquid thread locker!
Tighten the screws l13] as specified.

MOUNTING INSTRUCTIONS

Thank you for choosing this premium product from SW-MOTECH. Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required le.g.ABE certifications), are also available for download at our webshop. Installation and/or maintenance of this product require good technical understanding! For your own safety, SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work! Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist. This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts le.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behavior and/or stability of your vehicle.

GENERAL INFORMATION

Observe the country-specific regulations concerning vehicle registration/ operation as well as TUV regulations if applicable. if required register installed parts in the vehicle documents through an appropriate inspection authority.
PREPARATION: Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
FUNCTION CHECK: This is a universal product. For this reason make sure BEFORE the first use, that the product can be fixed properly and used without problems with your vehicle type. After fixation also make sure that no moving parts are obstructed and the function of the vehicle is not hindered in any way. Lamps as taillight and turn signals must not be limited in their function. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions.

PRODUCT SPECIFIC INFORMATION

ATTENTION: Riding with this product may affect motorcycle driving and braking performance!
ATTENTION: Before riding and at each stop every 200 km) check the proper fixation of the product!

ATTENTION: The maximum load must not be exceeded! The maximum vehicle load specified by the manufacturer must not be exceeded!

ATTENTION
NOT FOR OFFROAD USE!

PARTS LIST & CARE

CARE
Clean the product periodically or after each trip, as dust and dirt have a wear-effect and permanent stains can be prevented. Clean the product after riding in salty conditions, to avoid damage from salt. First, remove dust and encrustations with a soft dry brush. Remove stubborn deposits with a soft cloth and warm soapy water. Do NOT use strong cleaning agents, rough cleaning tools or high-pressure washer! Then rinse with clear water. Before re-use dries the product for at least 24 hours in the air lnot in direct sunlight).

FIXATION

Assemble the components as shown in the drawing. Pay attention to the side- specific alignment of the splint, as emphasized in the schematic drawing.
ATTENTION: Use liquid threat locker!
Tighten the screw as specified. Loop the string as shown.

NOTE: The BC. LOC. 00.682. 10000 is sold separately. Disassemble the components and attach them to bags lid as shown.

Hang the bag (1) into the sockets of the mounting bracket attached to your vehicle. Pay attention that both retaining elements are completely hooked into the socket contours of the mounting bracket.

Secure the bag (1) with the quick turn fastener 13, by inserting it into the opening and turning it clockwise. Pay attention to the audible clicking sound. The inserting position of the quick-turn fastener differs depending on the vehicle’s side. Attach the string of the quick-turn fastener to the loop on the inside of the bag.

ATTENTION: Before each ride, lock the lid of the bag.
Thoroughly clean the front of the lid from grease and dirt. Attach the reflector (4) to the lid as shown in the drawing.

MOUNTING INSTRUCTIONS

Errors and omissions excepted. Technical and design modifications are subject to change.

Copyright by SW-MOTECH GmbH & Co. KG

SW-MOTECH GmbH & Co. KG
Ernteweg 7-10
35282 Rauschenberg
Germany

Tel./phone + 49 (0)6425/8168 – 050
Fax / fax+ 49 (0]6425/8168 – 10
infodsw-motech.com
www.SW-motech.com

References

• Modesto Technologies

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>