everwell EW-V086-220 Voltage Protector Instruction Manual
- June 17, 2024
- everwell
Table of Contents
everwell EW-V086-220 Voltage Protector
Product Information
Specifications:
- Model: EW-V086-220
- Voltage: 220V~50/60Hz
- Phase: Three phase
- Applications: Air conditioners, compressors, motors, control panels, elevators, etc.
Features:
- Compact design
- Under and Over Voltage adjustable in +/- 20%
- Selectable Time Delay from 5 to 300 secs
- Phase Inverted detection LED light
- LED lights for Time Delay, Over, Normal and Under voltage detection
- Normally Open or Normally Close output contacts
Functions:
- Connected/Temporized LED Light
- Over Voltage detected LED Light
- Under Voltage detected LED Light
- Phase Inverted detected LED Light
- Under Voltage selector (190-210V)
- Over Voltage selector (230-255V)
- Time delay selector (5 to 300 sec)
- NO/NC connectors
- L1, L2 and L3 connector
Description:
The EW-V086-220 is an electronic protector designed to prevent damages
caused by voltage failures, blackouts, and voltage spikes and falls. It is
specifically designed for use with three-phase refrigerators, air conditioning
equipment, and electric motors. The microprocessor-controlled voltage
protector is adjustable up to 3.5 Amp.
Product Usage Instructions
Installation:
Follow the steps below to install the Voltage Protector:
- Ensure the power supply is turned off.
- Connect the L1, L2, and L3 connectors of the Voltage Protector to the corresponding power supply terminals.
- Connect the load to the NO/NC connectors of the Voltage Protector.
- Ensure all connections are secure.
Adjusting Voltage Settings:
The Voltage Protector allows adjustment of Under and Over Voltage settings.
Follow the steps below to adjust the voltage settings:
- Locate the Under Voltage selector and adjust it within the range of 190-210V.
- Locate the Over Voltage selector and adjust it within the range of 230-255V.
Setting Time Delay:
The Voltage Protector allows a selectable Time Delay between 5 to 300
seconds. Follow the steps below to set the Time Delay:
- Locate the Time delay selector and adjust it to the desired delay time.
LED Indicators:
The Voltage Protector features LED lights for various indications. The LED
indicators and their meanings are as follows:
- Connected/Temporized LED Light: Indicates that the protector is connected and in operation.
- Over Voltage detected LED Light: Indicates that an over voltage condition has been detected.
- Under Voltage detected LED Light: Indicates that an under voltage condition has been detected.
- Phase Inverted detected LED Light: Indicates that a phase inversion has been detected.
FAQ
-
What is the voltage range supported by the Voltage Protector?
The Voltage Protector supports a voltage range of 220V~50/60Hz. -
Can the Time Delay be adjusted?
Yes, the Time Delay can be adjusted between 5 to 300 seconds. -
What are the applications of the Voltage Protector?
The Voltage Protector can be used with air conditioners, compressors, motors, control panels, elevators, and other similar equipment.
PRODUCT OVERVIEW
Features:
- Compact design
- Under and Over Voltage adjustable in +/- 20%
- Selectable Time Delay from 5 to 300 secs
- Phase Inverted detection LED light
- LED lights for Time Delay, Over, Normal and Under voltage detection
- Normally Open or Normally Close output contacts
Functions:
- Connected/Temporized LED Light
- Over Voltage detected LED Light
- Under Voltage detected LED Light
- Phase Inverted detected LED Light
- Under Voltage selector (190-210V)
- Over Voltage selector (230-255V)
- Time delay selector (5 to 300 sec)
- NO/NC connectors
- L1, L2 and L3 connector
MORE ABOUT PRODUCT
The EW-V086-220 is an electronic protector against voltage failures, designed
to avoid damages caused by blackouts and voltage spikes and falls, in three
fase refrigerators and air conditioning equipment, as wells as electric
motors.