everwell MCRC-001 Universal PC Board Kit Instruction Manual
- June 17, 2024
- everwell
Table of Contents
everwell MCRC-001 Universal PC Board Kit Instruction Manual
ote: When compressoris shutof, tneeds 3 minutes to restart.
Mode Sefection Key: Select Working Mode. When Universal A/C Control Systern s in auto mode, the system willwork like Heat Mode if room temperature i below 21°C, or work cooling if room temperature is over 27, Fan Selection Key: Select Fan Speed. The fan speed will be low when in Dry Mode or in Heat Mode but compressor is shut of, or in Heat Mode but compressor working time less than 3 minutes. n Auto Fan Mode, the fan speed wil be highif difference ofsetfing and room temperature s higher than 4°C and will be: lowif difference less than 2C. Tempesature Setting Keys: Be able t setfrom 15°C o 30°. twill notresponse in Auto Mode or Dry Mode. Timer Selection Key: Select timer offline, timer online or no timer. Timer Time Setting Keys: Set from 1 to 16 hours.
Swing Key: Select Swing On or Off. Sleep Key: Will shutoffin 8 hours. “Too
Cool/Too Warm Key: Only effective in Auto Mode. Be able to adjust the setting
temperature 1°C up/down from 25°C when depressing once the key. ON/OFF Key:
Control On or Off.
LED Instruction:
L1: Operation Light On, Indoor Fan should start blowing. L2: Heating Light On,
Air-Conditioner should be in Heating Mode. L3: Timer Light On, Equipment
should ben Timer Mode. Reminder: In heating Mode, within the first 30 seconds,
vane will be lfted upward n order to avoid the cold wind blown people, then
itwill restore the original settings state.
Please Install by certified technician, test the system before
installation.
- Common Pins of swing socket are 12V output.
- The common pin of step motor should be inserted into one of the common pins of swing socket. Ifswing socket.
- Avoid strong light in front IR receiverection of step motor is wrong, insert the common pin of step motor to other common pin of