Conrad Electronic 2705586 DIN Connector Plug Socket Instruction Manual
- June 12, 2024
- Conrad Electronic
Table of Contents
Conrad Electronic 2705586 DIN Connector Plug Socket
Product Information
The Straight Pin Plug to Pin Socket is a connector with 10 contacts and a mating thread type of M16. It is made of high-quality materials, with a shell made of nickel-plated zinc alloy, insulation made of black Bakelite, and contacts made of silver-plated copper. The electrical specifications include an operating voltage of 30V, a rated current of 1A, an insulation resistance of at least 100M, and a contact resistance of a maximum of 10m.
Product Usage Instructions
- Ensure that the power source is turned off before connecting or disconnecting the Straight Pin Plug to Pin Socket.
- Identify the Plug and Socket ends of the connector.
- Align the pins on the Plug end with the corresponding sockets on the Socket end.
- Gently push the Plug into the Socket until it is firmly connected.
- To disconnect, hold the Plug and Socket firmly and pull them apart with a straight, even force.
- Do not force or twist the connector during connection or disconnection as it may cause damage.
- Ensure that the connector is properly secured and locked when in use to prevent accidental disconnection.
- Regularly inspect the connector for any signs of damage or wear. Replace if necessary.
For any further assistance or troubleshooting, refer to the complete user manual or contact our customer support.
Straight Pin Plug to Pin Socket
DIMENSIONS
Specification
- Number of Contacts: 10
- Mating thread type: M16
Material
- Shell: Nickel-plated Zinc Alloy
- Insulation: Black Bakelite
- Contact: Silver-plated Copper
Electrical
- Operating voltage: 30V
- Rated current: 1 A
- Insulation resistance: 100 M min.
- Contact resistance: 10 mΩ max.
Environment
- Operation temperature: -20 to 85°C
- Protect class: IP55
- Termination: Solder
- Suit Cable size: O.D. ø6.5mm max.
- Wire guide: AWG 22 – 20
- Conductor cross-section: 0.34 – 0.5mm²
Read User Manual Online (PDF format)
Loading......