PHILLIPS CONNECT 77-S211 Cargo Vision Sensor User Manual

: May 15, 2024
: PHILLIPS CONNECT

Table of Contents

INTRODUCTION
GENERAL FEATURES
SPECIFICATIONS
MECHANICAL DETAILS
COMPANY INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual
CargoVision™
Part#: 77-S211; 77-S267 WHT

PHILLIPS CONNECT 77-S211 Cargo Vision Sensor

CargoVision User Manual Rev B

INTRODUCTION

The Phillips Connect CargoVision is one of a growing family of sensors and system monitoring products from Phillips Connect used in conjunction with a PCT Gateway and Remote Listener System, or other cloud-based reporting system. CargoVision is designed to provide an uncompromised, on-demand view of the interior of a trailer in 1080P quality.
Simple installation and connectivity to your existing Phillips Connect Trailer Gateway module provides the ability to pre-program image capture events based on motion, door open/closed (if equipped), timebased or web-based image on- demand. Images are uploaded to the cloud for viewing through the Phillips Connect customer portal or automated API feed.

GENERAL FEATURES

Environmental Resistance: IP67
Operational Temperature: -40C to 70C
Solar Panel Max Power: 2.7W
Battery Capacity: 5.3Ah
Installation Time: ~15 minutes
Connectivity: BLE 2.4 GHz (to PCT Gateway module)
Image Quality: 1080P
Ideal Mounting Location: Top, Rear, Driver’s Side of trailer approximately 48” from rear of trailer and 12” from roof
Mounting Location Tolerance: +/-8” from roof, +/- 24” from rear door
Flash: High power dispersion lensed IR LED (x2)

PHILLIPS CONNECT 77-S211 Cargo Vision Sensor - GENERAL
FEATURES

SPECIFICATIONS

IMAGE PROPERTIES
Resolution: 1920 x 1080
Field of View: 140°
Flash: 1 second illumination per LED (red and white)

GATEWAY DATA INTERFACE
Bluetooth 4.2

ELECTRICAL
Solar Panel IMP (current @ max power): 0.49A
Solar Panel VMP (voltage @ max power): 5.5VDC
Battery Type: Li-ion, Rechargeable

Nominal Capacity: 5.3Ah
Nominal Voltage: 3.7V

Battery Performance (from full charge to depletion)

Up to 800 images
Operates for up to 400 days while idling

ENVIRONMENTAL
Ingress Protection Rating (External to Trailer): IP67
Operating Temperature: –40°F to +149°F (–40°C to +65°C)

MECHANICAL
Dimensions: 8.55” (H) x 10.14” (W) x 3.30” (D) (217.2mm x 257.6mm x 83.8mm)
Depth on trailer exterior: 0.96” (24.4mm)
Weight: 1.53 lbs. (695.9g)
Mounting: 54” from rear of trailer; 5” from roof
Location: Roadside rear of trailer

MECHANICAL DETAILS

4.1 FRONT/REAR DIMENSIONS

4.2 SIDE DIMENSIONS

PHILLIPS CONNECT 77-S211 Cargo Vision Sensor - SIDE
DIMENSIONS

FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE: FCC Radiation Exposure Statement
This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

INDUSTRY CANADA STATEMENT
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). operation is subject to the following two conditions:

This device may not cause interference
This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.