BLAUPUNKT 5DA17160AU Extractor Hood Instruction Manual

: May 15, 2024
: Blaupunkt

Table of Contents

BLAUPUNKT 5DA17160AU Extractor Hood
Product Specifications
Product Usage Instructions
SAFETY INFORMATION
USE
CARE AND CLEANING
CONTROLS
LIGHTING
INSTALLATION
Service
Documents / Resources

BLAUPUNKT 5DA17160AU Extractor Hood

BLAUPUNKT-5DA17160AU-Extractor-Hood-product-image

Product Specifications

Model Numbers: 5DA17160AU, 5DA15160AU, 5DA15260AU, 5DA17260AU
Extractor Hood
Lamp Power: E14, 35/100 W
Lamp Dimension: 107 x 37 mm
ILCOS Code: DRBB/F-4-220-240-E14-35/100

Product Usage Instructions

Safety Information
For your safety and correct operation of the appliance, read the manual carefully before installation and use. Keep these instructions with the appliance at all times. Users must fully understand the operation and safety features of the appliance.

Use
When replacing halogen lamps, use only self-shielded tungsten halogen lamps or self-shielded metal halide lamps.

Care and Cleaning

The Activated charcoal filter is not washable and must be replaced approximately every 4 months of operation.
The Grease filters must be cleaned every 2 months of operation and can be washed in a dishwasher.

Controls

L Light: Switches the lighting system on and off.
V Speed: Sets the operating speed of the extractor: 0. Motor Off, 1. Low speed, 2. Medium speed, 3. Maximum speed.

Lighting

Lamp Power (W): E14, 35/100 W
Socket Dimension (mm): 107 x 37
ILCOS Code: DRBB/F-4-220-240-E14-35/100

Frequently Asked Questions (FAQ)

Q: How often should I replace the activated charcoal filter?
A: The activated charcoal filter should be replaced approximately every 4 months of operation.
Q: Can the grease filters be washed in a dishwasher?
A: Yes, the grease filters can be washed in a dishwasher and should be cleaned every 2 months of operation.

Instruction manual

SAFETY INFORMATION

For your safety and correct operation of the appliance, read this manual care-fully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance.
The wire connection has to be done by specialized technician.
The manufacturer will not be held liable for any damages resulting from incorrect or improper installation.
The minimum safety distance between the cooker top and the extractor hood is 650 mm (some models can be installed at a lower height, please refer to the paragraphs on working dimensions and installation).
If the instructions for installation for the gas hob specify a greater distance, this must be respected.
Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood.
Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
For Class I appliances, check that the domestic power supply guarantees adequate earthing.
Connect the extractor to the exhaust flue through a pipe of minimum diameter 120 mm. The route of the flue must be as short as possible.
Regulations concerning the discharge of air have to be fulfilled.
Do not connect the extractor hood to exhaust ducts carrying combustion fumes (boilers, fireplaces, etc.).
If the extractor is used in conjunction with non-electrical appliances (e.g. gas burning appliances), a sufficient degree of aeration must be guaranteed in the room in order to prevent the backflow of exhaust gas. When the cooker hood is used in conjunction with appliances supplied with energy other than electric, the negative pressure in the room must not exceed 0,04 mbar to prevent fumes being drawn back into the room by the cooker hood.
The air must not be dis-charged into a flue that is used for exhausting fumes from appliances burning gas or other fuels.
If the supply cord is damaged, it must be replaced from the manufacturer or its service agent.
Connect the plug to a socket complying with current regulations, located in an accessible place.
With regards to the technical and safety measures to be adopted for fume discharging it is important to closely follow the regulations provided by the local authorities.
WARNING: Before installing the Hood, remove the protective films.
Use only screws and small parts in support of the hood.
WARNING: Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.
Do not look directly at the light through optical devices (binoculars, magnifying glasses…).
Do not flambè under the range hood; risk of fire.
This appliance can be used by children aged from 8 years and above and per-sons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children should be super-vised to ensure that they do not play with the appliance.
The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
Accessible parts may become hot when used with cooking appliances.
Clean and/or replace the Filters after the specified time period (Fire hazard). See paragraph Care and Cleaning.
There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the room).
The symbol on the product or on its packaging indicates that this product may not be treated as house-hold waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could other-wise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Range hoods and other cooking fume extractors may adversely affect the safe operation of appliances burning gas or other fuel (including those in other rooms) due to back flow of combustion gases. These gases can potentially result in carbon monoxide poisoning. After installation of a range hood or other cooking fume extractor, the operation of flued gas appliances should be tested by a competent person to ensure that back flow of combustion gases does not occur.
“In case of replacement with halogen lamp use only self-shielded tungsten halogen lamps or self-shielded metal halide lamps.”

USE

The extractor hood has been de-signed exclusively for domestic use to eliminate kitchen smells.
Never use the hood for purposes other than for which it has been designed.
Never leave high naked flames under the hood when it is in operation.
Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides.
Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames.

CARE AND CLEANING

The Activated charcoal filter is not washable and cannot be regenerated, and must be replaced approximately every 4 months of operation, or more frequently for particularly heavy usage (W). $BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $1$$
The Grease filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher (Z). $BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $2$$
Clean the hood using a damp cloth and a neutral liquid detergent.

CONTROLS

$BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $4$$

L Light Switches the lighting system on and off.
V Speed Sets the operating speed of the extractor:
- 0. Motor Off.
- 1. Low speed, used for a continuous and silent air change in the presence of light cooking vapour.
- 2. Medium speed, suitable for most operating conditions given the optimum treated air flow/noise level ratio.
- 3. Maximum speed, used for eliminating the highest cooking vapour emission, including long periods.

LIGHTING

Lamp	Power (W)	Socket	Voltage (V)	Dimension (mm)	ILCOS Code
****	4	E14	220 – 240	107 x 37	DRBB/F-4-220-240-E14-35/100

INSTALLATION

Warning! Before proceeding with installation, read the Recommendations and Suggestions in the User Manual.

$BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $8$$ $BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $9$$

$BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $10$$

$BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $11$$

$BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $12$$

$BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $13$$

$BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $14$$

$BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $23$$

$BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $24$$ $BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $25$$ $BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $26$$ $BLAUPUNKT-5DA17160AU-Extractor-Hood-fig- $27$$