PARMIDA PLED-RVPL-MCCT-5W 4.5 Inch 5W LED RV Dome Ceiling Lights Installation Guide
- May 15, 2024
- PARMIDA
Table of Contents
PARMIDA PLED-RVPL-MCCT-5W 4.5 Inch 5W LED RV Dome Ceiling Lights
Product Information
Specifications
- Product Name: 4.5 Inch 5W LED RV Light – 3CCT
- Model Number: PLED-RVPL-MCCT-5W
- Color Temperature Options: 3500K Neutral White, 4000K Cool White, 5000K Day Light
- Power: 5W
- Dimmable: Yes
Frequently Asked Questions
- Q: Can I use a different driver with this light?
- A: No, it is recommended to use only the Parmida Lighting driver included with the fixture to avoid any risks.
- Q: How can I change the color temperature of the light?
- A: You can change the color temperature by using the CCT switch located on the face of the light after removing the lens.
- Q: Is this light dimmable?
- A: Yes, this LED RV light is dimmable, but make sure to use a compatible dimmer switch for dimming functionality.
- Q: What are the available color temperature options?
- A: The available color temperature options are 3500K Neutral White, 4000K Cool White, and 5000K Day Light.
IMPORTANT: Please read carefully and save these instructions, as you may need them at a later date. When using electrical equipment, basic safety precautions should always be followed as below:
- Before beginning installation, ensure power is turned off at the main breaker.
- Ensure your eyes are properly protected
GENERAL
All electrical connections must be in accordance with local and National Electric Code (NEC) standards. All electrical connections, installation and service should be performed by a qualified licensed electrician.
READ AND FOLLOW BELOW SAFETY INSTRUCTIONS
To prevent wiring damage or abrasion do not expose wiring to edges of sheet
metal or other sharp objects.
This light is dimmable. Please refer to our website for the most up-to-date
compatible dimmer list.
Suitable for damp locations. For use in Recreational Vehicles. Use Class 2
Supply or 5A Fuse. DISCONNECT POWER BEFORE SERVICING.
REQUIRED TOOLS: (not included) Safety glasses and gloves, tape measure, screwdriver.
UNPACKING
- Thoroughly inspect the fixture for freight damage. Freight damage should be reported to the delivery carrier.
SELECTING COLOR TEMPERATURE
To avoid risk of damage, ensure wall switch connected to the light is turned to off position before changing or selecting desired color temperature (CCT) on the selector switch. Select the color temperature via the CCT switch located on the face of the light when the lens has been removed. Using the color (CCT) selector switch, select the desired color temperature (3500K Neutral White, 4000K Cool White, 5000K Day Light).
USING A DIMMER
DIMMING
- This light is compatible with a 12V PWM dimmer.
- Dimming performance may depend on the dimmer, the dimmer range adjustment setting (for dimmers with brightness range adjustments), the wiring method, and/or the number of LED fixtures installed onto the dimmer circuit.
- Before turning on the LED lights, set dimmer position at maximum before adjusting to a lower light level.
- Please follow the Dimming Control Manufacturer’s instructions for the installation of all dimming controls.
- Please visit our website www.parmida.com or contact our customer support team for more details.
INSTALLATION INSTRUCTIONS
STEPS FOR INSTALLATION
- Disconnect the power before installing the light.
- Detach the cover from the base of the light by rotating it counterclockwise.
- Connect the light’s wires to the power source. Connect the white wire to the negative line and the black wire to the positive.
- Mount the base of the light using the screws provided with the light.
- Set the preferred color temperature using the switch on the base.
- Replace the cover. Rotate cover clockwise to lock into place.
WARNING
- RISK OF FIRE OR ELECTRIC SHOCK
- DISCONNECT MAIN POWER AT FUSE OR CIRCUIT BREAKER BEFORE INSTALLING OR SERVICING THE LIGHT
- DO NOT USE ANY OTHER DRIVER EXCEPT PARMIDA LIGHTING DRIVER THAT IS INCLUDED WITH THE FIXTURE.
info@parmida.com
www.parmida.com