cellgate Watchman W462 IP Telephone Entry & Access Control Installation Guide

May 15, 2024
Cellgate

2023cellgate Watchman W462 IP Telephone Entry & Access
Control W462
Quick Install Guide
AA1MSE VPN

Items Included in Kit

Your shipment includes the following:

  1. Watchman Unit
  2. 12 Volt DC Power Supply
  3. Magnetic Read Switch
  4. Quick Install Guide
  5. Activation & Test Process
  6. Customer Information Packet
  7. Box that houses unit and its mounting instructions

462 Watchman Unit

Power Supply Wiring

cellgate Watchman W462 IP Telephone Entry & Access Control -
Wiring

We recommend the following gauges (ga) for each distance:

  • 18 ga stranded: up to 25 ft
  • 16 ga stranded: up to 50 ft
  • 12 ga stranded: up to 60 ft

Recommended wiring: 18/6 shielded for main device, and 18/4 shielded for optional Wiegand devices.

Interface Wiring Diagram: Pre-Wired Backplate Example

cellgate Watchman W462 IP Telephone Entry & Access Control - Wiring
Diagram

Network Connection

cellgate Watchman W462 IP Telephone Entry & Access Control - Network
Connection

POE
The Ethernet port is compatible with 802.3af Power-over-Ethernet. POE injector is not included.
DHCP
The device is set up for DHCP by default. If you need a static IP address, call us at 855-694-2837. We use DHCP (Dynamic Host Configuration Protocol) to assign an IP address to each Watchman device. The IP address indicates where the device is on your  network.
With DHCP, you don’t have to configure your network devices manually. It allows you to plug and play with your device.
Record your device’’s IP address here: ____

Relays: Direct Wire to Faceplate

Wet Connection, Normally Open
The door or lock opens when power is added.

cellgate Watchman W462 IP Telephone Entry & Access Control -
Connection

Wet Connection, Normally Closed
The door or lock opens when power is removed.

cellgate Watchman W462 IP Telephone Entry & Access Control - Connection
2

Dry Contact, Normally Open
The gate or door receives continuity when the relay is active.

cellgate Watchman W462 IP Telephone Entry & Access Control - Connection
3

Dry Contact, Normally Closed
The gate or door receives continuity when the relay is at rest.cellgate
Watchman W462 IP Telephone Entry & Access Control - Connection
4

Inputs

Input 1

cellgate Watchman W462 IP Telephone Entry & Access Control -
Inputs

Input 2

cellgate Watchman W462 IP Telephone Entry & Access Control - Inputs
2

Input 3

cellgate Watchman W462 IP Telephone Entry & Access Control - Inputs
3

To Wiegand Device and 12 V Source

cellgate Watchman W462 IP Telephone Entry & Access Control - Inputs
4

Magnetic Switch Setup

The Mag Switch can be placed anywhere that allows A and B to be pulled at least 2 inches away from each other when the gate is open and within 1.5 inches when the gate is closed.

cellgate Watchman W462 IP Telephone Entry & Access Control -
Switch

Note
Gate statuses can be inverted. If needed, call CellGate to invert.

Magnetic Switch Wiring

cellgate Watchman W462 IP Telephone Entry & Access Control - Wiring
3

1.855.694.2837
cell-gate.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals