Westinghouse W-793 LED Outdoor Lighting Fixture Owner’s Manual

May 15, 2024
Westinghouse

Westinghouse W-793 LED Outdoor Lighting Fixture

Westinghouse W-793 LED Outdoor Lighting Fixture

FIXTURE WARRANTY

This Westinghouse lighting fixture is warranted against defects in material and workmanship for a period of five years from purchase date. This warranty is in lieu of all other warranties expressed or implied.
This warranty does not cover acts of nature such as lightening damage, or corrosion and discoloration of components, nor does it cover damages caused through abuse, improver installation, surges in electric current, or acts of third parties.
This warranty does not cover the costs of removing and re-installing the lighting fixture.
If this product fails for any reason covered by this warranty, please contact us at www.westinghouselighting.com/contact- us.

ASSEMBLY INSTRUCTIONS FOR OUTDOOR LIGHTING FIXTURE

Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty and service. For questions and comments, please visit www.westinghouselighting. com/contact-us.
NOTE : Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1 ).

Assembly

WARNING : ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.
Read and follow instructions exactly as shown. If instructions are unclear, do not proceed.
Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase.
For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provided on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult a qualified electrician before installing.

NOTE : THIS FIXTURE IS SUITABLE FOR USE WITH DIMMABLE SWITCHES, SEE BELOW FOR LIST OF COMPATIBLE DIMMERS.

Brand Model # DIMMING Range
Lutron TGCL-153P, DVCL-153P, DVCL-253P-WH, PD-6WCL, 10-100%

MACL-153M, MRF2-6CL, S-600
Leviton| 011-IPL06-10Z, 001-RDL06-10Z, 001-RNL06-10Z,| 10-100%
002-6674-10W, DDMX1-BLZ, R6Z-6683-1W, 001-DSL06-1LZ,
C22-6672-1LW, C26-RNL06-TW, DL6HD, DW6HD, DW1KD,
DL1KD, DSL06-1LZ, IPL06-10Z, SCL-153P-WH, R50-IPL06-10,
R62-6674-POW, 012-TSL03-1LW
Cooper| AAL06-C1-K-L, DAL06P-C1, SAL06P-W-K| 10-100%
GE Lighting| ZW3005| 10-100%

MOUNTING AND WIRING INSTRUCTIONS

NOTE : Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

  1. Turn off power at circuit box to avoid possible electric shock.
  2. Thread mounting screws (A) approximately 1/4 inch into outlet box (B) (see fig. 1).
  3. Connect the black wire from the fixture with the black wire (live wire) from the outlet box by wire connector (G), and wrap the wire connector (G) with electrical tape for a more secure connection.
  4. Connect the white wire from the fixture with the white wire (neutral wire) from the outlet box by wire connector (G), and wrap the wire connector (G) with electrical tape for a more secure connection.
  5. Connect the grounding wire (M) from the fixture with the grounding wire from outlet box by wire connector (G) (if applicable), then wrap the wire connector (G) with electrical tape for a more secure connection.
  6. Tuck wires inside outlet box (B).

FIXTURE ASSEMBLY INSTRUCTIONS

  1. Raise canopy (C) to ceiling allowing mounting screws (A) to protrude through key slots (H) in canopy (C) (see fig. 1).
  2. Rotate canopy (C) clockwise until mounting screws (A) lock into narrow portion of key slots (H). Secure into place with mounting screws (A).
  3. Slide the switch (E) on the inside of the canopy (C) to the desired color temperature setting.
  4. Raise the shade (F) up allowing the protrusions to engage the slot of the canopy. And twist the shade (F) to lock into place.
  5. Turn power back on at circuit box.
    Assembly

WARNING

Turn off electricity to the mounting site before beginning installation.
Mounting instructions must be followed exactly as shown for the fixture to be safely supported.

CLEANING AND CARE

To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can discolor the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

ORDERING PARTS

Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.

Customer Support

Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com
and Westinghouse are trademarks of Westinghouse Electric Corporation.
Used under license by Westinghouse Lighting. All Rights Reserved. Made in Cambodia.

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Westinghouse User Manuals

Related Manuals