V I V O MOUNT-KB01B Under Desk Rotating Keyboard Tray Instruction Manual
- May 15, 2024
- V I V O
Table of Contents
Under Desk Rotating
Keyboard Tray
SKU: MOUNT-KB01B
Instruction Manual
MOUNT-KB01B Under Desk Rotating Keyboard Tray
Assembly Video & Product Info
www.vivo-us.com/products/mount-kb01b
https://vivo-us.com/products
/mount-kb01b
CAUTION!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please contact our product support team at
309-278-5303 or help@vivo-us.com for further
assistance. Check carefully to make sure there are no missing or defective
parts. Improper installation may cause damage or serious injury. Do not use
this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused
by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.
We’re Here for You
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer
immediate assistance with rapid response times. If any parts are received
damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
| Give us a Call: 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M
4S
---|---|---
| Chat Us: www.vivo-us.com| AVG. RESOLUTION
TIME (within office hrs): < 15 M
| Email Us: help@vivo-us.com| AVG. RESPONSE
TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
Package Contents
Included Hardware & Tools
|
---|---
S-A (x4)
M8x12mm Screw| S-B (x10)
M5x12mm Screw
|
M-A (x6)
ST5x16mm Screw| T-A (x1)
5mm Allen Wrench
Tools Needed:
|
---|---
Phillips Screwdriver| Drill
|
3mm Drill Bit| Pencil
Weight Capacity:
ASSEMBLY STEPS
STEP 1
Align the Mounting Template (G) to the underside edge of your desktop with the
arrow facing the desktop edge. Tape to temporarily hold in place. Mark and
drill .39” (10mm) deep pilot holes using a 3/16 (3mm) drill bit. Remove
Template.
STEP 2
Install the Upper Mounting Bracket (C) to the desktop using ST5x16mm Screws
(M-A) and a Phillips screwdriver.
STEP 3
Attach the Lower Mounting Bracket (D) to the Upper Mounting Bracket (C) using
M8x12mm Screws (S-A), tightening with 5mm Allen Wrench (T-A). Select the
mounting holes that match your desired under desk clearance.
1st Set – 3 1/4” (83mm) clearance between the top of tray and
underside of desktop
2nd Set – 4 1/5” (107mm) clearance between the top of tray and underside of
desktop
STEP 4
Place Tray Set (A) side by side and note the two sets of pilot holes. Identify
which set is closer to the combined edge; this is the backside of the tray.
Place Tray Support (B) onto Tray Set from the back side, with Raised Center
facing up. Secure using M5x12mm Screws (S-B) and a Phillips screwdriver.
STEP 5
Insert Plastic Bushings (F) into top and bottom of Tray Support (B) post.
Secure the Tray Support (B) to the Lower Mounting Bracket (D) by threading the
Swivel Cap (E) to Lower Mounting Bracket post.
STEP 6
Place keyboard and mouse onto assembled tray and adjust as desired.
LAST UPDATED: 10/09/23
REV1
v1.0
Need Help? Get In Touch
Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
VIVO-us
@vivo_us
FOR MORE GREAT VIVO PRODUCTS,
CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM
Documents / Resources
| V I
V O MOUNT-KB01B Under Desk Rotating Keyboard
Tray
[pdf] Instruction Manual
MOUNT-KB01B, MOUNT-KB01B Under Desk Rotating Keyboard Tray, Under Desk
Rotating Keyboard Tray, Desk Rotating Keyboard Tray, Rotating Keyboard Tray,
Keyboard Tray, Tray
---|---
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Black Under Desk Rotating Keyboard Tray – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>