V I V O PP-WM48B Wall Mounted Metal Pegboard Instruction Manual
- May 15, 2024
- V I V O
Table of Contents
Wall Mounted Metal Pegboard
Instruction Manual
SKU: PP-WM48B
PP-WM48B Wall Mounted Metal Pegboard
https://vivo-us.com/products/pp-wm48b
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product. https://vivo-us.com/products/pp-
wm48b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| |
---|---|---
help@vivo-us.com| www.vivo-us.com
Chat live with an agent!| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please contact our product support team at
309-278-5303 or help@vivo-
us.com for further assistance.
Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this
product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by
improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
| |
---|---|---
A (x3)
Panel| W-A (x18)
ST4x30mm Screw| W-B (x18)
Concrete Anchors
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WOOD WALL INSTALLATION
STEP 1 (Wood Wall)
Wood Wall:
Place a Panel (A) against the wall and and mark the drilling locations with a
pencil.
For a wood stud wall, make sure that the holes line up with the studs. Use of
a level and a stud finder is recommended. Drill 13/16” (30mm) deep holes using
a 7/64” (3mm) drill bit, then install the Panel (A) using ST4x30mm Screws
(W-A).
NOTE: If mounting to wood studs, make sure that the edge of the panel is
centered with the stud. If not, it will cause the misalignment of future
panels.
STEP 2 (WOOD WALL)
Line up the other two Panels (A) with the first one and mark the screw holes.
Drill 13/16” (30mm) deep holes using a 7/64” (3mm) drill bit, then install the
Panel (A) using ST4x30mm Screws (W-A).
CONCRETE WALL INSTALLATION
STEP 1 (Concrete Wall)
Place a Panel (A) against the wall and and mark the drilling locations with a
pencil. Use of a level is recommended.
Drill 1-⅜” (35mm) deep holes using a 15/64” (6mm) drill bit, then insert the
Concrete Anchors (W-B) into the holes and install the Panel (A) using ST4x30mm
Screws (W-A). 
STEP 2 (Concrete Wall)
Line up the other two Panels (A) with the first one and mark the screw holes.
Drill 1-⅜” (35mm) deep holes using a 15/64” (6mm) drill bit, then insert the
Concrete Anchors (W-B) into the holes and install the Panels (A) using
ST4x30mm Screws (W-A). 
[ THIS PAGE INTENTIONALLY LEFT BLANK ]
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 08/28/2023
REV1 Open Monday – Friday 7:00am – 7:00pm CS T,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Black Wall Mounted Metal Pegboard – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>