VIVO PP-2-PB058 Black Freestanding Pegboard Organizer Instruction Manual

May 15, 2024
Vivo

VIVO PP-2-PB058 Black Freestanding Pegboard Organizer

VIVO PP-2-PB058 Black Freestanding Pegboard Organizer

SymbolWARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury.
Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

SymbolWARNING: CHOKING HAZARD

SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

  • A (x6) Shelf
    Package Contents

  • B (x8) Pegboard Panels
    Package Contents

  • C (x3) Vertical Support
    Package Contents

  • D (x3) Support Feet
    Package Contents

  • E (x4) Horizontal Connector
    Package Contents

  • F (x3) Support Bracket

  • G (x12) Shelf Support

  • H (x1) Eyelet Hook

  • I (x2) Round Hook

  • J (x2) Small Round Hook

  • K (x1) Square Edge Hook

  • L (x2) Basket Hook

  • M (x1) Double Hook

  • N (x5) Magnet

  • O (x20) Rubber Stopper

  • P (x1) Basket

  • Q (x3) Adjustable Feet

  • R (x9) Tube Caps

  • S (x8) Corner Bracket

  • S-A (x6) M8x45mm Screw

  • S-B (x38) M8 Washer

  • S-C (x18) M8 Nut

  • S-D (x20) M8x55mm Screw

  • C1/D1 (x6) M8x15mm Screw

  • W-A (x2) Wall Mounting Plate

  • W-B (x2) Drywall Screws

  • W-C (x2) Drywall Anchor

  • T-A (x1) 14mm Wrench

  • T-B (x1) 5mm Allen Wrench

TOOLS NEEDED
Package Contents

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1

Install Tub Caps (R) on the top of all Vertical Supports (C) , and the bottom and end of all Support Feet (D).

STEP 2

Place Support Brackets (F) over the long ends of Vertical Supports (C) and Support Feet (D).

Secure Support Brackets (F) using M8x45mm Screw (S-A) , M8 Washer ( S-B) , M8 Nu t (S-C) , Wrench (T-A), and 5mm Allen Wrench (T-B) , in the side holes of Brackets at shown.

STEP 3

PLEASE NOTE : Pegboard can be assembled as either freestanding or mounted to the wall for extra reinforcement with Wall Mounting Plates (W-A). To add Anchors, follow instructions for Option B on the next page.

OPTION A – NORMAL FREESTANDING ASSEMBLY
Finish securing Support Brackets (F) using M8x15mm Screws (C1/D1) , M8 Washers (S-B) , and 5mm Allen Wrench (T-B) in top holes of Brackets.

STEP 3 – Continued

OPTION B – WALL MOUNTED

Finish securing Support Brackets (F) using M8x15mm Screws (C1/D1) , M8 Washers (S-B) , Wall Mounting Plate (W-A), and 5mm Allen Wrench (T-B) in top holes of Brackets.
Note: Use the oval shaped hole in Anchors.

Assembly Steps
STEP 4
Connect support assemblies together using Horizontal Connectors (E) and Corner Brackets (S), M8x55mm Screws (S-D) , M8 Washers (S-B) , M8 Nuts (S-C) , 14mm Wrench (T-A) , and 5mm Allen Wrench (T-B).
Assembly Steps

STEP 5

Stand up the pegboard assembly and install Adjustable Feet (Q) to underside of Support Feet (D) and adjust to level the pegboard.
Assembly Steps

STEP 6

Lay the supports on the ground and align the Pegboard Panels (B) in desired positions without installing them. Then starting with the bottom Pegboard panels, slide panel hooks into the slots in the supports.

Note: Install Pegboard Panels bottom to top. Improper installation will result in gaps in the
pegboard.
Assembly Steps

STEP 7

Attach Shelf Brackets (G) to the supports in the desired positions, and then place Shelves (A) on top of the Shelf Supports (G).

Assembly Steps

OPTIONAL: WALL MOUTING

If you chose wall mounting in STEP 4, connect the Wall Mounting Plate (W-A) to the wall using Wall Mounting Screws (W-B) , Drywall Anchor (W-C) , and a drill.
Assembly Steps

ACCESSORIES

Place Accessories (H thru P) in desired mounting locations. Hang Basket (P) on Basket Hooks (L).
Accessories

Customer support

SKU: PP-2-PB058Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/pp2-pb058

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

help@vivo-us.com

www.vivo-us.com
Chat live with an agent!

Symbol
309-278-5303

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Vivo User Manuals

Related Manuals