FRONT RUNNER JADA010 Hi-Lift Jack Bracket Instruction Manual
- June 4, 2024
- Front Runner
Table of Contents
JADA010 Hi-Lift Jack Bracket
Instruction Manual
JADA010 Hi-Lift Jack Bracket
READ ME!
Thank you for purchasing a Front Runner Hi-Lift Jack Bracket.
Before you start, take a moment to familiarize yourself with the Fitting
Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities, and tools
required.
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT-RUNNER PRODUCTS BE PROPERLY AND SECURELY
ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN
AUTOMOBILE ACCIDENT AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE
RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT-RUNNER PRODUCTS TO YOUR
VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING
THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE, YOU MUST READ AND
UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT-
RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF
THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE
NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE
PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the
failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this
product.
GET ORGANIZED
Here is what you are looking at for JADA010
RECOMMENDED POSITIONS
2.1
Please note that it is not recommended to mount your Hi-Lift Jack on the front
or rear of your Rack only on the sides.
For ease of instruction, we have chosen to describe one orientation of
mounting the Jack Bracket.
The principles are the same, just the positioning and orientation of the
brackets may vary depending on where you want to mount the jack.
Decide where on your Rack you would like to mount the Hi-Lift Jack. The
brackets can be orientated upwards, downwards, front to back, and back to
front. Refer to Page 4, showing the various mounting options.
IMPORTANT WARNING!
X THIS POSITION IS NOT SUITED FOR A HI-LIFT JACK.
FIT AND SECURE
| Fit and Secure Base Bracket in the desired position as shown.
---|---
| Secure as shown. Insert 2 M8 Hex Nuts at the point indicated
by the arrow.
| Assemble the machined pin and securing bolt in a hole pattern
suited to your jack.
| Fit and Secure the handle clamp in the desired position, using
the fasteners shown in Figure 1.2
FINISH
Congratulations! You did it. Take a step back and admire your work!
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
Now’s the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters
BornToRoam Share your adventures on:
JADA010_REV_B05
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>