naturewater NW-PR303 3 Stage Filter with Active Carbon Block Instruction Manual
- May 15, 2024
- Naturewater
Table of Contents
Instruction Manual
NW 3-stage filter
51108, 51109
Illustration similar, may vary depending on model
NW-PR303 3 Stage Filter with Active Carbon Block
Read and follow the operating instructions and safety information before using
for the first time.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate
insignificantly due to continuous further developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities,
please contact us.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved. WilTec Wildanger Technik GmbH
cannot be held liable or any possible mistakes in this operating manual, nor
in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to
ensure that this operating manual is complete, accurate, and up-to-date,
errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward
to hearing from you. Send us an e-mail to: service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop: https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the
following address. Attention!
To allow for a trouble-free complaint or return, it is important to contact
our customer service team before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: service@wiltec.info
Phone: +49 2403 55592–0
Fax: (+49 2403 55592–15)
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to always take some basic safety precautions when using
this product. Please read this operating manual carefully and make sure that
you understand it.
Keep these operation instructions in a safe place.
-
The offered water filter system is delivered with a 5 µ sediment filter insert that removes reliably sand, rust, algae, and other floating particles from the water.
The second filter stage consists of an active carbon granulated filter cartridge and cleans drinking water from ozone, pesticides, rust, lime floating particles, and chlorine. Moreover, it reduces the concentration of heavy metals such as lead and copper.
The third filter stage consists of an active carbon block filter cartridge and cleans drinking water from ozone, pesticides, rust, lime floating particles, and chlorine and reduces the concentration of heavy metals such as lead and copper. -
The different connections for the inlet and outlet can be chosen by the customer.
-
Open the casing and remove the filter cartridge. Remove the wrapping on the inside of the cartridge. Then place the filter cartridge back into the casing and close it again.
-
Check the connection between this product and everything connected to it.
-
Connect the feed to the tap and ensure that its positioning is secure.
-
Open the tap. The water will be redirected from the pipe through the filter system from where it will flow out of the opening valve.
-
The used water filter inserts and cartridges need to be exchanged according to the water quality in regular intervals. The sediment and activated carbon filters cannot be washed out and need to be replaced approximately every 6 months.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>