Maxwood WML30039 Max and Lily Twin Over Twin Low Bunk with Slide and Ladder User Guide
- June 14, 2024
- Maxwood
Table of Contents
ATTENTION PLEASE READ
BEFORE OPENING + ASSEMBLING
WML30039 Max and Lily Twin Over Twin Low Bunk with Slide and Ladder
MAXWOOD FURNITURE IS A FAMILY OF BRANDS BUILT WITH YOUR FAMILY IN MIND.
WE APPRECIATE YOUR ORDER!
WE STAND BEHIND OUR PRODUCTS 100% YOUR SATISFACTION IS OUR #1 GOAL.
IF YOUR ORDER IS NOT PERFECT, OR IF YOU WOULD LIKE ANY ASSISTANCE; PLEASE FEEL
FREE TO CONTACT US:
CUSTOMERCARE@MAXWOODFURNITURE.COM
877 776 3388
WE ARE HAPPY TO HELP!
180217
LOW BUNK BED WITH SLIDE
| 
---|---
|
| Not Included
WARNING:
CHOKING HAZARD Small Parts Not for children under 3 years.
To be Assembled by an Adult
| 
---|---
| 
| 
| 
| 
| 
| 
| 
| 
| 
Thank you for your purchase from Maxwood Furniture. We hope you and your kids
will love it! Please keep these assembly instructions for future reference.
Important:
Safety is our number one concern – please follow these simple safety tips:
Remember to check and tighten bolts/hardware once every few month, as these
may loosen with use over time.
If you have purchased a bed, chose a low profile mattress for the top bunk
(ideally 5” (13cm) or max 9” (23 cm)) to maximize safety rail height.
Make sure to anchor your large dressers to the wall with the free anti-tip kit
provided.
Read and follow the safety instructions on the card attached to the front of
your dresser.
Replacement Parts:
In case there is a problem with your product such as missing hardware, please
contact your local dealer from whom you purchased the product, and they will
be able to provide you with further information on how to obtain replacements.
You may find this by going to:
www.maxwoodfurniture.com and find your
local dealer from whom you purchased the product and they will assist you
further.
Size of Mattress and Foundation. This bed is designed to use a mattress size
74”75” (188cm – 190cm) long and 37½”-38½” (95cm – 98cm) wide with twin size;
52½”-53½” (133cm – 135cm) wide with full size on upper and lower bunk.
Ensure thickness of mattress and foundation combined does not exceed 9” (23cm)
on upper and lower bunk and mattress is at least 5” (13cm) below upper edge of
guard rail.
Intended use of Single Beds and Day Beds is Age Group 3 Years and older (36
months and older). Intended use of raised beds including but not limited to
Loft Beds and Bunk Beds is 6 Years and older (72 months and older).
SAFETY WARNINGS
-
Follow the information on the warnings appearing on the upper bunk bed end structure and on the carton. Do not remove warning label from bed.
-
Always use recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
-
Surface of mattress must be at least 5” (13cm) below the upper edge of the guardrails.
-
Do not allow children under 6 years of age to use the upper bunk.
-
Periodically check and ensure that the guardrail, ladder and other components are in their proper position, free from damage and that the connectors are tight.
-
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
-
Prohibit more than one person on the upper bunk.
-
Always use the ladder for entering and leaving the upper bunk.
-
Do not use substitute parts. Contact manufacturer or dealer for replacement parts.
-
Use of a night light may provide added safety precaution for a child using the upper bunk.
-
Always use guardrails on both long sides of upper bunk.
-
If the bunk bed will be placed next to awall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
-
The use of water or sleep flotation mattresses is prohibited
-
Keep these instructions for future reference.
STRANGULATION HAZARD -
Never attach or hang items to any part of the bunk bed that are not designed for use with the bed, for example but not limited to hooks, belts, and jump ropes.
Replacement Parts
Replacement parts, including additional guard rails, may be obtained from any
of our Maxwood Furniture dealers.
CALIFORNIA 93120 PHASE 2 COMPLIANT FOR FORMALDEHYDE
COMPLIANT WITH EPA 40 CFR 770 – TSCA VI REQUIREMENT FOR FORMALDEHYDE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>