SLINEX Accessoreies Series Cloud Call Application User Manual

SLINEX Accessoreies Series Cloud Call Application

Enter «Google Play» (for Android) or «Apple App Store» (for iOS) and search for the «Cloud Call» application, then install this application on your mobile device.

Creating new account

1. Start the «Cloud Call» application on your mobile device and press the «NEW USER» button to create an account;
2. Fill in the «Email» box and press the «GET CODE» button;
3. Check for a new message with an activation code on your Email account and enter it into the «Verification Code» box;
4. Fill in the «Password» and «Confirm Password» boxes and press the «CONFIRM» button to create a new account. That password will be used to login into the created account.

Adding new device

Wired network connection steps

1. Use a twisted pair of CAT5 or CAT6 cable to connect device to the router;
2. Connect the mobile device into the same local network;
3. Press the «CONNECT NEW DEVICE» button, then choose the «EXISTING» check box and press the «CONFIRM» button;
4. New devices search will be applied and you will see the list of the devices, connected to the local network;
5. Tap on UID in the left column, corresponding to the device sticker or press the «QR CodeScan» button and then scan QR code on your device sticker if device UID isn’t in the list;
6. Fill in device information:
7. Device UID: unique identification number of the device (already filled);
8. Device Name: any name you like;
9. Password: 888888 (by default);
10. then press the «CONFIRM» button and you will see added device on the main bar.

Wireless Wi-Fi network connection steps

1. Connect mobile device into the Wi-Fi network you want to connect monitor or outdoor panel;
2. Disable 3G/4G internet connection on your mobile device;
3. Press the «CONNECT NEW DEVICE» button, then choose «NEW» check box and press the «CONFIRM» button;
4. On the monitor or outdoor panel enter into «Access point» mode if it doesn’t enter it automatically. You can enter into «Access point» mode manually by following the next steps:

For ML-20IP press&hold call button → first short «beep» sound → release call button and quickly press&hold it again → second short «beep» sound → release call button and quickly press&hold it again → third «beep» → release call button → door station will be restarted and then after a minute you will hear another «beep» sound and call button backlight starts blinking with two colors. It means the door station entered «Access point» mode.
For SL-07IP press&hold the button until you will hear a «beep» sound from the monitor, then release the button and wait for another «beep» sound after a minute. It means the monitor restarted and entered into «Access point» mode. In «Access point» mode monitor buttons’ backlight is constantly blinking.
For XR-30IP press&hold the «AP mode» button on the right side of the converter until the blue AP LED will be activated. Then release the «AP mode» button and the converter will be rebooted. After a minute converter will enter «Access point» mode, indicated by AP LED;

1. Press the «CONTINUE» button on the mobile device screen to go to the next step. In case if you add current device for the second time then before pressing the «CONTINUE» button forget (delete) the device’s network (network name begins from cctv2…) in your mobile phone or tablet Wi-Fi settings;
2. Enter a password of the Wi-Fi network which you want to connect to and press the «CONTINUE» button;
3. Fill in device information:
4. Device UID: unique identification number of the device (already filled);
5. Device Name: any name you like;
6. Password: 888888 (by default);
7. then press the «CONFIRM» button and you will see added device on the main bar.

Notes

1. SL-10IPT and SL-10IP monitors can only be connectet to Wi-Fi network manually using monitor main menu (refer to the SL-10IPT or SL-10IP user manual for detailed steps). Then after Wi-Fi connection, follow the steps from section 2.1, page 1, for wired network connection, to add device into application.
2. If there is no LAN cable connected to the monitor or outdoor panel on the first boot then it will automatically go into «Access point» mode and you can skip 4th step of section 2.2.
3. If device is already added to some account, you can’t add it to another one, only can share it with another account.

Operation

Note: While device monitoring, one-way audio is constantly active from the outdoor panel side so you can hear what happens nearby. To activate two- way communication press the «Talk with the visitor» button in the application.

Call notification messages

• Press the button to activate notification messages preset.
• DND mode: notification messages are disabled;
• Online mode: notification messages are enabled;
• Custom mode:  notification messages can be enabled or disabled depending on the settings inside that preset;

Share with other devices

The account, device was added the first time, is master account. This account has master permissions and can change all the settings. If several mobile phones are going to be used with the same device then account should be created on every mobile phone. Here are the steps to add the same device on several mobile phones:

1. Create an account on the first mobile phone application and add your device. This mobile phone will have master permissions for that device;
2. Create an account on all other mobile phones which the same device is going to be used;
3. Start device monitoring on the master mobile phone and then press the «Share» icon in the right upper corner of the screen;
4. Fill in the account name of the mobile phone which the current device will be shared. In a few moments device will appear on the second mobile phone application. Note that all other mobile phones except master can only talk with the visitor, view the image and open lock. Changing device settings is not available on the slave mobile phones.
5. In the same way add all other mobile devices into sharing list.

Motion detection settings

• Press the icon on the main bar to enter device settings. Press the «ADVANCED SETTINGS» button and then
• Press the «Motion Detection» button to enter motion detection settings.

In motion detection settings menu you can enable or disable that function. Here you can set motion sensitivity from 1 to 4, where 4 is lowest sensitivity and 1 is the highest one. If you have a lot of false alarms just go with 3 or 4. Also you can set day and time when the motion detection function will be active.

Events history

In the device menu swipe left to go to the events page, then press «Event on Device» button to view events history.

• Here there is a time scale where you can choose the date to view recorded videos or snapshots.
• That remote records archive is stored on your outdoor panel memory or monitor SD card.

Note: «ADVANCED SETTINGS» menu currently doesn’t available on SL-10IPT and SL-10IP monitors.

Application settings

• Press icon on the main bar to enter application settings.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>