SLINEX ML-17HD Call Panel User Manual

: June 4, 2024
: SLINEX

Table of Contents

SLINEX ML-17HD Call Panel
Package
Specification
Description
Schematic diagram
Video camera output setting (AHD or PAL)
Limited warranty
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SLINEX ML-17HD Call Panel

Package

ML-17HD outdoor panel − 1 pc.
Wall mounting bracket − 1 pc.
Angle bracket − 1 pc.
Mounting screws and anchors − 1 pkg. User manual − 1 pc.

Specification

SENSOR TYPE
1/2.9” CMOS, 1920×1080 px
VIDEO OUTPUT
AHD 1080p (2 MP), AHD 720p
(1 MP) or CVBS (PAL)
VIEW ANGLE
130˚
NIGHT BACKLIGHT
Infrared, 3 meters distance
VOLTAGE
+12 V from the monitor
POWER CONSUMPTION 2.5 W in working mode
INSTALLATION TYPE Surface mount
DIMENSIONS 48×133×21 mm
WORKING TEMPERATURE –40 … +50 ˚C
LOCK TYPES
Electromechanical or electromagnetyc locks with up to 6A current

Description

Microphone
Video camera
Night infrared backlight
Call button
Speaker
Communication cable
Video camera mode button Speaker volume potentiometer

Wire colors

Red
Black
Yellow
White
Blue
Green
Brown
Red & white
Power, +12 V
Ground (GND)
Video
Audio
N.O. relay contact
COM. relay contact
N.C. relay contact
Video camera power, +12 V

Schematic diagram

Installation

Angle mount

Take the angle bracket from the kit and place it 150-160 cm from the floor line;
Mark and drill two halls inside the wall;
Take two anchors from the kit and hammer them into the drilled halls;
Fix angle bracket on the wall by two screws from the kit;
Fix wall mounting bracket on the angle bracket by two screws from the kit;
Connect all communication wires and fix the door panel on the wall mounting bracket by the screw from the down side.

Surface mount

Take the wall mounting bracket from the kit and place it 150-160 cm from the floor line;
Mark and drill four halls inside the wall;
Take four anchors from the kit and hammer them into the drilled halls;
Fix wall mounting bracket by four screws from the kit;
Connect all communication wires and fix the door panel on the wall mounting bracket by the screw from the downside.

Video camera output setting (AHD or PAL)

Outdoor panel video camera can work in three basic modes: AHD 1080p
(2 MP) – default mode, AHD 720p (1 MP) or analog CVBS (PAL). AHD is a high- resolution mode, so it has better image quality than analog CVBS mode. While using high-resolution AHD modes, the monitor must maintain that kind of signal, otherwise there will be no image on the monitor screen.
To switch video camera modes remove resin cap on the back cover of the outdoor panel. Then press and hold camera mode button during 5 seconds to switch from the current mode to the next one in a such sequence:
AHD-H (1080P) → AHD-M (720P) → PAL → AHD-H (1080P).

Limited warranty

The manufacturer guarantees the product’s normal functioning during the warranty period if the user keeps all safety instructions described in that manual. The warranty period is 12 months from the moment of the product purchasing (the warranty period could be extended up to 24 months or more, depending on the local regulations). The warranty period allows the user to make a guaranteed repair in cases when the normal functioning of the product was violated by the fault of the manufacturer and the user hasn’t offended transporting, installation, and working conditions. This limited warranty does not cover any damage to the product that results from improper installation, accident, abuse, misuse, natural disaster, insufficient or excessive electrical supply, abnormal mechanical or environmental conditions, or any unauthorized disassembly, repair or modification.

Warranty void in such cases:

the product was damaged by the fault of the customer;
the product wasn’t properly installed according recommendations from the manual;
the sticker on the backside of the product was broken;
the product was not used for its intended function.

This limited warranty covers only repair, replacement, refund or credit for defective products, as provided above. The manufacturer is not liable for, and does not cover under warranty, any damages or losses of any kind whatsoever resulting from loss of, damage to, or corruption of, content or data or any costs associated with determining the source of system problems or removing, servicing or installing products. This warranty excludes third-party software, connected equipment or stored data. The manufacturer is therefore not liable for any losses or damage attributable to third-party software, connected equipment or stored data. In the event a product has been discontinued, the manufacturer shall either repair the product, offer to replace it with a comparable product or provide a refund at the lesser of the purchase price or the product’s current value. Repaired or replacement products will continue to be covered by this limited warranty for the remainder of the original warranty term.

Technical support