UBIQUITI UVC-AI Professional Wide Angle Lens Instruction Manual
- June 17, 2024
- UBIQUITI
Table of Contents
UBIQUITI UVC-AI Professional Wide Angle Lens
Product Specifications
- Model: UVC-AI-Theta-ProLens110
- Compliance: Directives 2014/30/EU, 2014/35/EU
- Manufacturer: Ubiquiti International Holding B.V.
- Address: Ekkersrijt 3102, Son, Netherlands
- Dimensions: 20mm
Product Usage Instructions
Installation Guide
- Ensure the device is placed on a stable surface.
- Connect the necessary cables as instructed in the manual.
- Adjust the lens for optimal positioning.
- Rotate the lens to the desired angle.
- Secure the lens in place to avoid movement.
- Ensure proper power supply (AC).
CONNECTION
Safety
Safety Notices (if applicable)
- Read, follow, and keep these instructions.
- Heed all warnings.
- Only use attachments/accessories specified by the manufacturer.
- WARNING: Failure to provide proper ventilation may cause a hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate air flow.
- WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
- WARNING: Do not use this product in a location that can be submerged in water.
- WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Electrical Safety Information (if applicable)
- Compliance is required concerning voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment, or pose a re-hazard if the limitations are not followed.
- There are no operator-serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
- This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
- a. Do not substitute the power cord with one that is not the approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
- b. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
- c. Contact a qualified electrician or the manufacturer if there are questions about the installation before connecting the equipment. d. Protective earthing is provided by a Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection. e. Protective bonding must be installed by local national wiring rules and regulations
Declaration of Conformity
Hereby, UBIQUITI, declares that this device, UVC-AI-Theta-ProLens110, complies
with the essential requirements and other relevant provisions of Directives
2014/30/EU, 2014/35/EU. The full text of the EU Declaration of Conformity and
detailed compliance information is available at the following internet
address: ui.com/compliance
Ubiquiti International Holding B.V.
Ekkersrijt 3102, Son, Netherlands
FAQ
Frequently Asked Questions
- Q: Where can I find the full text of the EU Declaration of Conformity?
- A: The full text of the EU Declaration of Conformity and detailed compliance information is available at ui.com/compliance.
- Q: How can I adjust the lens for optimal positioning?
- A: To adjust the lens, rotate it to the desired angle, secure it in place to avoid movement, and ensure proper power supply (AC).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>