TokeShimi V01 24 Inch Bathroom LED Round Mirror Instruction Manual

TokeShimi V01 24 Inch Bathroom LED Round Mirror

Specifications:

• Anti-fog feature
• Color Temperature control
• ON/OFF/Lighting Mode and Brightness adjustment
• Memory Function to save settings

Product Usage Instructions

Before Installation:

• Assemble with two or more adults for proper installation
• Consult a qualified technician for electrical connections
• Disconnect power before installation
• Ensure fixing location can support the weight
• Follow provided instructions for safe installation

Pre-assembly:

• Inspect for damage or missing parts upon receipt
• Ensure voltage is between 100V and 120V, use a transformer if needed
• Connect wires to junction box or plug
• Do not remove silicone protector until installation is complete

Installation Instructions:

1. Hang mirror above the highest part of the faucet
2. Drill holes where marked and insert anchors based on wall thickness
3. Mount bracket to the wall with screws
4. Connect power by plugging into an outlet or hardwiring to a circuit panel

Cleaning Instructions:

When cleaning the mirror:

1. Use a soft, non-abrasive cloth to clean
2. Avoid rough or abrasive materials that may damage the surface
3. Avoid cleaning agents that may cause irritation or damage
   • Gentle liquid detergents
   • Colorless cleansers

Warranty:
A 1-year warranty from the date of purchase is provided.

Contact Us:

If you have any questions, contact us at aftersale@tokeshimi- home.com.

FAQ:

• Q: Can I use the mirror with a voltage higher than 120V?
  A: It is recommended to use a transformer if the voltage exceeds 120V.

• Q: How should I clean the mirror?
  A: Use a soft, non-abrasive cloth with gentle liquid detergents or colorless cleansers to clean the mirror surface.

• Q: What should I do if I encounter transit damage or missing parts upon receipt?
  A: Contact our customer service immediately for assistance.

HOW TO USE AND CLEAN

In order to keep the LED mirror in perfect condition, we suggest a proper use and regular cleaning.

How to Use

1. Please ensure that the product is used within the safe voltage range of 100V-120V.
2. Please wrap electrical tape around the wires to prevent electrical leakage.
3. Avoid using hard or pointed items to strike the mirror glass so as to prevent damage.

How to Clean

When cleaning the mirror, please follow these steps:

1. Use a soft, non-abrasive cloth to clean the mirror. Avoid using rough or abrasive materials that may damage the surface.
2. Do not use any cleaning agents that may cause irritation or damage to the mirror’s finish. Instead, use any of the recommended cleansers to remove dirt and grime:
3. Gentle liquid detergents
4. Colorless cleansers

Warranty

A 1-year warranty from the date of your purchase

If you have any questions, please feel free to contact us via aftersale @tokeshimi-home.com

BEFORE INSTALLATION

Thank you for choosing TokeShimi products. To ensure the best possible experience, please read carefully and follow the instructions provided below before assembling and installing the product

Important Safety Instructions:

1. Assembly by two or more adults is highly recommended, in order to ensure proper installation.
2. To connect the wires to the electrical junction box, consultation with a qualified technician or electrician is highly recommended.
3. Disconnect power before installing, adding, or changing any components.
4. Make sure that the fixing location can support the weight of the entire fixture (e.g. solid stone or brick walls).
5. To prevent injury, the mirror must be installed according to the instructions provided.

Pre-assembly:

• Inspect the product immediately upon receipt for any transit damage or missing parts.
• The voltage for your product should be between 100V and 120V. If the voltage exceeds 120V, please use a transformer.
• You can connect the wires directly to your junction box or plug.
• Do not remove the transparent silicone protector until the installation is complete

Before Installation

please check to make sure the mirror is working properly :

Anti-fog
The anti-fog function helps resist the troubling fog and keep a clear reflection image. To save energy, it will automatically turn off after one hour.

Color Temperature
You can select the color temperature by tapping the button: the first tap is white light, the second tap is warm light, and the third one is natural light.

ON/OFF/ Lighting Mode and Brightness

The lighting mode will change as you tap the button: the first tap is for front light and backlight, the second tap is for front light only, the third one is for backlight only, and the light will be all off with a fourth tap. The brightness can be adjusted with a long press on the button. If no button is pressed within 15 seconds, the next tap will turn off the light immediately.
Memory Function: The current setting of the mirror will be saved. When you turn on the mirror next time, it will be in the same settings as it was.

CONTACT US

After opening the package, please inspect the product immedi-ately and see if there is any damage or missing parts. If there is, please contact us by aftersale@tokeshimi-home.com or find us at Amazon by following steps:

• Open “Orders” at Amazon, find the product you have purchased and open the product page;
• Click Sold by “TokeShimi“, and click “Ask a question” on the redirected page;
• Click “An order I have placed“ in the chat with Seller Messaging Assistant ;
• Click in sequence “Your product“, ”Other”, “Troubleshooting“ from available options, you will see a message box after that.
• Please leave us a message, and we will reply within 24 hours.

PACKING LIST

**INSTALLATION TOOLS

**

INSTALLATION INSTRUCTIONS

1. Decide where to install the mirror. Make sure the bracket is located horizontally with the help of a level ruler, and mark the spots ① ② ③ for drilling on the wall.

2. Drill holes where marked and insert anchors.

3. Mount the bracket to the wall with screws.

4. Connect the power by plugging into an outlet or hardwired to a standard circuit panel.
   Plug-in
   After hanging the mirror securely, plug the power cable to a standard socket.
   Hardwired
   Cut the head off the plug and hardwire it into an outlet.
   Reminder : Please make sure the power is cut off before installation.

5. Place the mirror against the wall, align the hook with the mounted bracket, slowly lower the mirror down, and make sure that it slots into the right position and hangs securely.

SPECIFICATIONS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>