Seville Classics SHE99307ZB UltraDurable NSF Commercial Heavy Duty Metal Rolling Utility Cart User Manual
- June 17, 2024
- seville classics
Table of Contents
- Seville Classics SHE99307ZB UltraDurable NSF Commercial Heavy Duty Metal
- Model: SHE99307ZB
- FAQS
- Q. Can I use it outside?
- Q. Can I use it with fewer shelves? Without the handle?
- Specifications
- Customer Service Information
- PARTS LIST
- ASSEMBLY INSTRUCTIONS
- STEP 2.
- STEP 3.
- STEP 4.
- STEP 5.
- BASKET (D).
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Seville Classics SHE99307ZB UltraDurable NSF Commercial Heavy Duty Metal
Rolling Utility Cart User Manual
Model: SHE99307ZB
Thank you for choosing Seville Classics! We hope that you enjoy your new utility cart. Please read through this user guide for parts list, assembly instructions, frequently asked questions and further contact information.
Shelving Liners
29” W x 17.5” D (3-Pack)
Model No.: WEB089
1.5” Slip Sleeves 8-Pairs
Model No.: WEB012
FAQS
Q. Can I use it outside?
- Our cart is designed for temporary outdoor use. Storing the cart outdoors increases the risk of corrosion from moisture.
Q. Can I use it with fewer shelves? Without the handle?
- Yes! You can use the cart with a minimum of two shelves and without the handle.
Specifications
Dimensions: 33.75″ W x 18″ D x 32.25″ H Weight capacity: 500 lbs. evenly distributed Weight: 43 lbs.
Customer Service Information
Seville Classics Inc. Telephone:
800-323-5565
Fax : 310-533-3899
Hours : 8:30 AM – 4:30 PM (PST)
Email : Support@SevilleClassics.com
Homepage : www.SevilleClassics.com
PARTS LIST
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at 800-323-5565 or send an email to Support@SevilleClassics.com
ASSEMBLY INSTRUCTIONS
You can view an assembly video here or scan the QR code.
STEP 1.
Screw WHEELS (F, G) into the
bottom of the POLES (B).
Repeat for all of the POLES (B).
STEP 2.
Snap SLIP SLEEVES (E) onto the lowest groove of each of the POLES (B).
STEP 3.
Fit SHELF (C) over the top of the 4 poles and over the SLIP SLEEVES
(E).
TIP : If needed, use a rubber mallet to secure the shelf.
Repeat STEPS 2-3 at chosen height for the 2nd shelf.
STEP 4.
Snap 2 SLIP SLEEVES (E) onto the poles on the narrow side of the cart.
TIP: Make sure to leave space at the top of the POLES (B) for the
BASKET (D).
Slide HANDLE (A) over the
SLIP SLEEVES (E).
STEP 5.
Repeat STEPS 2-3 for the
BASKET (D).
TIP : If necessary, use a rubber mallet to secure the shelf.