Seville Classics WEB106 5-Tier Wire Shelving with Wheels Instructions
- June 15, 2024
- seville classics
Table of Contents
4-Tier Steel Wire Shelving with Caster
30″W x 14″D x 49.5″H (48″H on leveling feet)
WEB106 5-Tier Wire Shelving with Wheels
Model #: WEB674
Thank you for choosing Seville Classics! We hope that you enjoy your steel wire shelving system! Please read through this guide for parts list, assembly instructions, frequently asked questions and further contact information.
Parts List
Please make sure you have all the parts on this list.
A. Bottom poles (4) (Threaded end)|
---|---
B. Top poles (4) (Plastic cap on end)|
C. Connectors (4) (May be attached to poles}|
D. Shelves (4)|
E. Slip sleeves (16)|
F. Leveling feet (4)|
G. Casters (2)|
H. Locking Casters (2)|
If you’re missing parts, contact us for replacements at 800-323-5565 or send an email to Support@SevilleClassics.com
Assembly Instructions
STEP 1.
Screw LEVELING FEET (F) or CASTERS (G, H) into base of bottom poles. Repeat
for all bottom poles.
STEP 2.
Snap SUP SLEEVES (E) around the grooves on BOTTOM POLES (A) for your lowest
shelf.
TIP! Count the number of
grooves from the bottom of the pole to keep the height consistent.
STEP 3.
Fit SHELF (D) over the top of the 4 poles and over SLIP SLEEVES (E).
Repeat STEPS 2-3 for next shelf.
TIP If necessary, lightly tap shelves into place with a rubber mallet.
STEP 4.
Screw CONNECTORS (C) into top of BOTTOM POLES (A). Screw TOP POLES (B) to
CONNECTORS (C).
TIP! Connectors may be pre-installed.
STEP 5.
Repeat STEPS 2-3 for remaining shelves.
Congratulations!
Enjoy your now complete shelving
unit.
Documents / Resources
|
Seville Classics WEB106 5-Tier Wire Shelving with
Wheels
[pdf] Instructions
WEB106 5-Tier Wire Shelving with Wheels, WEB106, 5-Tier Wire Shelving with
Wheels, Shelving with Wheels
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>